How can I add a privacy statement to my outgoing emails, below my signature?

I'm a therapist and need to have a privacy statement/disclaimer below my signature on my outgoing emails...something like the following:
STATEMENT OF CONFIDENTIALITY AND PRIVILEGE
The contents of this e-mail (including its attachments) are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. Any other distribution, copying or disclosure is strictly prohibited. Email is not a secure medium of communication and should not be used for transmitting private and confidential information.
How do I add this?? thanks, Karen

You can set up multiple signatures and select the appropriate one. Or use stationery where the signature and disclaimer are part of the template document. Or use a text clippings tool to insert ready-to-go frequently used snippets such as your disclaimer text. Many users make use of such a tool in lieu of a prepared signature.

Similar Messages

How can i use one SQL statement to solve problem?

How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.

What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) || '01'
WHERE substr(f,
              -2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) ||
           DECODE(SUBSTR(f,
                         -2),
                  '00',
                  '01',
                  SUBSTR(f,
                         -2));

How can I add the listener to the CellRenderer

My class named NoteColumnRenderer extends DefaultTableCellRenderer
and thhe getTableCellRendererComponent() returns JButton .
My question is how can I add MouseMotionListener to the JButton
or how can I add MouseMotionListener to the NoteColumnRenderer ?
The code below,and there is no effect
public class NoteColumnRenderer extends DefaultTableCellRenderer {
public NoteColumnRenderer(boolean multiSelection) {
super();
System.out.println("b="+this.getListeners(MouseMotionListener.class).length);
this.addMouseMotionListener(new MouseMotionListener(){
public void mouseDragged(MouseEvent e) {
System.out.println("mouse+++++++");
public void mouseMoved(MouseEvent e) {
System.out.println("mouse-------");
m_button.addMouseMotionListener(new MouseMotionListener(){
public void mouseDragged(MouseEvent e) {
// TODO Auto-generated method stub
System.out.println("mouse=====");
public void mouseMoved(MouseEvent e) {
// TODO Auto-generated method stub
System.out.println("mouse=======");
System.out.println("a="+this.getListeners(MouseMotionListener.class).length);
m_multiSelection = multiSelection;
if (m_multiSelection) {
     m_check = new JCheckBox();
m_check.setMargin(new Insets(0, 0, 0, 0));
m_check.setHorizontalAlignment(JLabel.CENTER);
          } else
m_button.setMargin(new Insets(0, 0, 0, 0));
m_button.setSize(new Dimension(5, 5));
m_combobox = new JComboBox();
     } // IDColumnRenderer
     /** Mult-Selection flag */
     private boolean m_multiSelection;
     /** The Single-Selection renderer */
     private JButton m_button=new JButton();
     /* The Multi-Selection renderer */
     private JCheckBox m_check;
     private JComboBox m_combobox;
     protected void setValue(Object value) {
          if (m_multiSelection) {
               boolean sel = false;
               if (value == null)
     else if (value instanceof Boolean)
          sel = ((Boolean) value).booleanValue();
               else
          sel = value.toString().equals("Y");
               m_check.setSelected(sel);
          else
               if (value == null)
               else
     if(value.toString().length()>10)
m_button.setText(value.toString().substring(0,10)+"...");
                    else
                         m_button.setText(value.toString());
                    m_button.setBackground(Color.WHITE);
     public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
          setValue(value);
          if (m_multiSelection)
               return m_check;
          else
               return m_button;
}

Listener can be added to a cell editor, not cell renderer.
Set relevent cess(s) to setEditable == true when you use your custom cell editor.

How can I add the controller name in the subject of Alarm emails? PI2.1

How can I add the controller name in the Alarm emails in PI2.1? This would make it much easier to scan the mailbox and see what devices are affected.

Thanx for your reply. No, although helpful, that's not what I meant. In outlook, the first line of the header contains the full username follow by a horizontal line. Under that, the default headers like To:, From:, Subject: etc follow.
I need that firstline printed so we know instantly from which user the email was printed (the To: field often is the same name of the sender of the mail, therefor you won't know WHO printed it...).

HT5622 how can you add a group to contacts to email or message?

How can you add a group to your contacts to email or message a group?

There are example OMB commands in the MDL referenced in the post below;
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$198
Look at the body of the expert you will see examples of creating joiners, filters, aggregators, constants etc all via OMB.
Cheers
David

How can I add iCloud to mail without it choosing mobile me?

How can I add iCloud account to mail without it choosing mobile me?

Please always state your operating system when you have a question. Presumably you have Snow Leopard or Leopard - system too old to have heard of iCloud.
Please follow the steps outlined in this illustrated article:
Entering iCloud email settings manually in Snow Leopard or Leopard

How can I add a new column in compress partition table.

I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected]

How can i add one month to a date variable ?

Unlike the week which always 7 days, month may change from 28 to
31, so how can i add one month to a date variable ? Thanks in
advance.

Adding 365 won't always work because of leap years.
You could use the following SQL statement:
SELECT
     TO_DATE(
          TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
            (TO_CHAR(TO_DATE(SYSDATE), 'YYYY') + 1)) NEXT_YEAR
FROM
     dual
NEXT_YEAR
08-JAN-03Or you could create your own function. You would use this
exactly like add_months:
CREATE OR REPLACE FUNCTION add_years
     (v_date DATE, num_years NUMBER)
RETURN DATE AS
     v_year DATE;
BEGIN
     v_year := TO_DATE(
               TO_CHAR(TO_DATE(SYSDATE), 'DD-MON-') ||
                     (TO_CHAR(TO_DATE(SYSDATE), 'YYYY')
                                         + num_years));
     RETURN v_year;
END;
SELECT
     add_years(SYSDATE, 1) new_year
FROM
     dual
NEW_YEAR
08-JAN-03
SELECT
     add_years(SYSDATE, -1) new_year
FROM
     dual
NEW_YEAR
08-JAN-01

How can I add a library of flash movies to my site?

I posted this same question on the Dreamweaver forum and a suggestion was made that I try over here for help, so please excuse the duplicate question.
How can I add a library of flash movies to my site?
Hey there everyone and thanks for reading my question.
I have a library of flash movies (specifically a library of maps) and when the map movies are run in Flash they call each other just fine (i.e. the USA map will load the Georgia map when Georgia is clicked on the USA map, etc etc etc for each state).
HOWEVER, when I insert the USA map in one of my site pages (I'm working on the site using Dreamweaver CS4) the USA map page will load, but when a state is clicked the area on the page for the map goes blank and the state map does not load.
Short of coding a specific path in each of my state maps (in the Flash editor) is there a way to tell Dreamweaver there is a library of maps, look there for the sub-map?
and if I do have to code the path to the map, can I code a relative path rather than a specific URL address for the maps?
I know this is probably one of those simple things, but I'm not seeing it (can you tell I'm new at this??)
Thanks in advance for any help!
Frances

Hey again,
Thanks for the helpful suggestions. Everyone's comments got me to thinking about what the path was in the calls from the maps.
here is what finally worked:
on (release)
loadMovie("../FlashIMapDownloads/georgia.swf", 0);
this script code is in the action script for the "georgia" button of my main map - a US Map. (I hope I'm describing all this correctly).
I'll post this same info in the Dreamweaver forum too.
Thanks again!
Frances

How can we add a checkbox in form (Scripts)

Hello Experts,
i want to add a checkbox in the form. how can v add a check box in the form. i tried with sap scripts symbols like sym_checkbox but it's not working.
and i can print a small box by using Box statement. but i need exactly a check box. how can v create it in scripts.
thanks in advance.

Hi,
Please refer the links,
Check Box With Tick Mark on Sap Script
putting tick mark into check box in smartform
Regards,
Hema.
Reward points if it is useful.

How can I edit the privacy settings for my daughters Apple ID.

My daughter has forgotten her privacy settings. She has $80 in credit and would like to use them. How can she edit her privacy settings?

What do you mean by 'privacy settings' ?
If you mean the Settings > General > Restrictions passcode on her iPad then was it on the iPad when she last backed up ? If not then she can restore to that backup and it should be removed. If it was on the iPad when she last backed up then the only way to remove it is to reset the iPad back to factory defaults and she can then re-sync your content back to her iPad - she won't be able to restore to the backup as that will keep the code in place.
If you mean the answers to her security questions, then if she has a rescue email address (which is not the same thing as an alternate email address) on her account then the steps on this page will give you a reset link on her account : http://support.apple.com/kb/HT6170
If she doesn't have a rescue email address (she won't be able to add one until she can answer her questions) then sher will need to contact Support in her country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if she doesn't already have a rescue email address) sher can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
If you mean something else ... ?

How can I add iPhone Serial No. in Apple Support Profile

Recently, I bought iPhone 5 Unlocked on eBay. Now I am trying to add serial number in my apple support profile but I found this error " According to our records, this serial number is associated to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other products. Not sure if you have another Apple ID? ". so what should i need to do in this respect? further I have original seller purchased invoice (not apple original invoice) and I have proof of purchased thought paypal statement/invoice. So how can I add this iPhone in my account.
Regards,
Sohailg

I have the same problem. How do I fix this?

How can you add a 2nd i Tunes account on the same computer?

How can you add a 2nd i Tunes account to the same computer?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can i add form of my own to "SAPM07DR"

i been asked to add form develop by me to the standart program "SAPM07DR" .
this task came from the need of the implementation
of the "material management" , assign forms and program.
now i get the output "ZWE4" ,
and i want to assign form of my own ,
i tried to add smart form but i get message
"Errors occurred while processing output"
so I want to try layout with standard program "SAPM07DR" .
how can i add form of my own to this program

First, you must copy this program to your own program with "ZSAPM07DR" then copy the include program where the routine pass through the program
example: entry_we03 -> from include M07DRENT and M07DRAUS
         change this include to ZM07DRENT and ZM07DRAUS
The next step is binding your form in the program.
what forms do you use ? Sapscript or Smartforms ?
in this Program already used Sapscript. You can See there is Open_Form Function in that Program.
I suggest you to Bind Smartforms.
IF you use smartforms, Remark All Statement from
"PERFORM open_form_sammel." to "PERFORM close_form." before endform
that perform including in M07DRAUS -> FORM lesen_wes USING objky lgortsplit.
after that put this program to replace the remark :
data : FMNAME type RS38L_FNAM.
DATA: ls_control_param      TYPE ssfctrlop.
set preview parameters
      MOVE 'X' TO ls_control_param-no_dialog.
      MOVE 'X' TO ls_control_param-preview.
      MOVE 'PRINTER' TO ls_control_param-device.
*break-point.
*****Print SmartForms
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          FORMNAME           = TNAPR-SFORM
        IMPORTING
          FM_NAME            = FMNAME
        EXCEPTIONS
          NO_FORM            = 1
          NO_FUNCTION_MODULE = 2
          OTHERS             = 3.
     CALL FUNCTION FMNAME
     EXPORTING
         control_parameters   = ls_control_param
     TABLES
         traptab           = traptab
     EXCEPTIONS
         formatting_error = 1
         internal_error   = 2
         send_error       = 3.
     if sy-subrc NE 0.
*******message 'Error' type 'S'.
     endif.
*******End Smartforms
Hope This Help...

How can I add an MSN email account to my phone. They show as listed when I click on the email icon but I can not send or receive from there.

How can I get my phone to get and send emails on my msn accounts? They appear on the list of emails when I click on the icon but they do not work. They useed towork fine. If I try to add an account it says Domain. Then acct name and password. I have tried lots of domain names but all it say is "Can not connect". Any ideas?

Hello riopeltravel, let's solve this mystery! What make & model phone do you have? Also, have you tried deleting the email account off of the phone and re-adding with the username and password? How long have the email accounts stopped working? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

How can I add a privacy statement to my outgoing emails, below my signature?

Similar Messages

Maybe you are looking for