How can I add a Smart object (button) to a quiz background and have it work?
Good day,
I have the need to add button to a quiz (in Captivate 6) to allow people to leave the quiz and go back to the start page.
I realize you cant add a normal button to quiz, so I added a smart object converted to a button on the master page. I have it all set up to go to the page, mouse over shows hand and all of that.
the Captivate runs, I get to the quiz, mouse over it changes to a hand. I click and it does nothing. Any ideas why?? Any suggestions on how to do what I want?
Thank you
Dave Stabley
Hi Lilybiri,
I always look to your blog for help. This time unfortunately it didnt help me.
as I expressed above all I am trying to do is create a button that will do a jump to page with in a quiz.
I have some long quizes in the captivate projects that I create. Once a person starts a quiz they might realize it is a bit more than they are ready for. I am just trying to give them a way to click a buttong to get out of the quiz and back to a certain page.
On the master page for the quiz, I created a smart object (rectangle) that is converted to a button it is also transparent and goes over top of a graphic for the button.
I tell it to go to the correct page, and I set it up so that when you mouse over the smart object it shows a hand
When I go to preview this, I mouse over the graphic and get the hand icon, but when I click it goes no where. It seems to me that the quiz is waitting for an answer before it will accept the click. The catch is when I give the answer it forgets click and moves on the the next question.
Any thoughts?
Thank you
Similar Messages
-
How can i add a donate now button to my iweb website
how can i add a donate now button to my iweb website
Here's some info about PayPal buttons....
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/PayPal.html
A "Donate" button is created in the same way as a "Buy" button. -
how can i add a new language to iOS?? do i have to create a language pack to do it?? PLEASE help...
yes a new language.. do i have to create a language pack?? or any other way.. i need to make my device display in "sinhala" langauge which is used in my country (Sri Lanka) and not yet available in iOS.. is this possible?? seeking help very badly...
PLEASE help... -
I have one playlist on iphone4. how can i add new playlist without deleting old one. i do not have old playlist in itunes any more.When i try to sync iphone with itunes it says that this action will remove my old playlist and all songs.
"it says that this action will remove my old playlist and all songs."
Are you connecting to a different iTunes library than you normally connect to? That will erase the songs and playlists since the iPhone can't be connected to multiple libraries even if it is in manual sync mode.
If you no longer have access to the original library that your iPhone calls 'home', then the only way to save the playlist (and the songs on your iPhone) would be to use a 3rd party application to extract your iPhone contents to this new iTunes library you're trying to connect to. -
How can I add a Save form button ( not save as ) for a custom fillable form ?
How can I add a Save button ( not save as ) for a custom fillable form ?
idea is ti to have a Save button at the bottom of each page where the person filling
the form clicks the save button on each page.( it is a 12 page fillable form )
The only thing I was able to do was add a button that opens a Save As
dialog box only.
My experience lever is - end user-intermediate.
Thnaks.Thanks for the response.
I wonder why it wont allow.
If I can save ( as opposed to save as) this form by clicking the save icon on the menu bar, I am not sure why it is no possible to do so on page level!
Custom script option is not even remotely possible! -
How can I add a twitter link to my mobile me website and how can I put up a link to my blog
How can I add twitter to my website I tried following the instructions from twitter I could post a line of text which worked as a link but I could not get the twitter bird logo to appear.
Also how can I find the address of my blog page. How can I set up alink to my blog page.
Thank you
I am running snow leopard on a macbook 10.6.8Thank you. I could not find a way to reply to you I did not see the reply button. So I thought I had to just post it again.
I only want to put up a twitter button on to my webpage. I have already put up the text from twitter on to my website and this link works [ I think} but not the graphic of the button. I want to do the follow buttton which was not listed on the address above.
I tried the address for my blog you suggested and it did not work.Will this address be on my website somewhere.
Still confussed. -
How can I add my smart tv to my mac network?
I recently bought a Mod.# 470 SV LED tv from Vizio. It is set up in my wireless network but I cannot use it to display or mirror my MacBook (13" early 2008), except for Netflix and a few other things that came canned on the tv (smart tv). I understand I can hook it up to an HDMI cable and get it to work but I am hopeing that I can do it wireless. I also heard that if I used an Apple TV and eventually get the next OS (mountain Lion), I will be able to do it wirelessly. I would also hope that I will be able to get my audio to work. Any pointers, hints, advice or rebukes will be greatly appreciated. Please keep it simple for I am barely literate at this stuff. Thanks much.
Please check out the following AirPort User Tip on how to recover AirPort passwords.
-
How can I duplicate a smart object and then edit it, without affecting the original?
I have a vector element from illustrator that I am placing in a tshirt mockup in photoshop. I have the layout essentially how I would like, but I am trying different color variations. I would think to just duplicate the first placement and then edit the color of the resulting copy, but this affects both the copy and the original. I looked into it a bit further, and found that I should try the "replace contents" option under smart objects, and that this would change the copy. So I go back to illustrator, made a copy of the original vector, and then made the color change I had in mind, and then saved it as a separate document that I could then use in replacing the contents of the copied. This however, is still affecting both smart objects!
I have tried this as both linked smart objects and embedded smart objects without success.
Ultimately, I simply want to maintain the position of the original layer with the duplicated and edited layers. If you know of a better way, please share!I'm on CC on a Mac.
What 21 is talking about is making some sense.
I am able to create new smart object via copy, then create a variation on the original file linked in the parent smart object. Then I save that from illustrator with a different file name. Then I go back to photoshop and replace contents of the new smart object, linking it to the newer illustrator file.
This gets around the problem, but it takes a few more steps than the same thing did it in earlier versions of photoshop. -
How can I add a normal-sized button to my frame???
hi,
my GUI has two JScrollPane-s together in a JSplitPane and below I'd like to add a single small button.
I put this button into a new JPanel, but it is displayed veeery BIG !
I tried to use .setPreferredSize(new Dimension(int, int)), but it didn't help a lot.
this is a piece of my code:
public class MyTree extends JPanel implements TreeSelectionListener, ActionListener {
this.setLayout(new GridLayout(2,0));
buttonUpdateM_File = new JButton("Update the .m file");
buttonUpdateM_File.addActionListener(this);
JPanel actionPane = new JPanel(new GridLayout(0,1));
actionPane.setMaximumSize(new Dimension(1,2));
actionPane.setPreferredSize(new Dimension(5,10));
actionPane.add(buttonUpdateM_File);
//create the scroll pane and put the tree into it
JScrollPane treeView = new JScrollPane(tree);
//create the viewing scroll pane
JScrollPane maskViewPane = new JScrollPane();
//add the two scroll panes to a split pane
JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
splitPane.setLeftComponent(treeView);
splitPane.setRightComponent(maskViewPane);
Dimension minimumSize = new Dimension(420, 360);
treeView.setMinimumSize(minimumSize);
maskViewPane.setMinimumSize(minimumSize);
splitPane.setDividerLocation(210);
splitPane.setPreferredSize(new Dimension(600, 510));
//Add the split pane to this panel
add(splitPane);
add(actionPane);
}Thank you!thanks,
as far as I understood there is no way to shrink the
new JPanel with this GridLayout.Yes, Grid just makes a set of fixed sized boxes. If you want the JPanel to be the same size as the JButton, what do you want the panel for? -
How can you get around Smart Mix limit of foreground or background?
I am having trouble dealing with this limit, when I would like to have three levels of audio. Highest Narration track , then Audio 1, then soundtrack.
I wonder if a solution whould be to have just the audio and narration and then make a new AVI file. Second step would be to go back with a new project and make the NEW audio 1 forground and add a sound track as background. Would this also help in making a DVD by a lot of the processing being done in the first step? I just did a 37 min DVD and my XP system took 2 hours to make the DVD. I have 2 HD and 3GB ram.I would suggest a slightly different workflow. First, one can add as many Audio Tracks, as are needed. I think there is a limit, but it's way up there.
Next, instead of using Smart Mix, Keyframe the Volume of each Clip, or each Track*, to provide any necessary attenuation.
*Whether one chooses Clip Volume Keyframes, or Track Volume Keyframes will depend on how they like to work, and on where they might be in the editing process. I like to do my Audio at the very end of the editing process, so that I have all Clips where I want them. I then use the Audio Mixer to add Track Keyframes, raising and lowering the volume, as I see fit. Note: Track Keyframes are just what they sound like - they are located ON the Audio Track, so if one changes Clips on that Track, the changes still apply, just as they were laid down, regardless of Clips. Hint: I find that the default setting for Track Keyframe Frequency is a bit too much, and have adjusted that Frequency down quit a bit. This is done in Edit>Preferences.
As I often use SmartSound's Sonicfire Pro to do full scoring, I will Export/Share an intermediate reference file, and use that to create my Soundtrack, for later Import. Besides Volume Attenuation, SonicFire has some fabulous controls, with almost infinite settings. All other Audio editing is done in my NLE, and then the finished Soundtrack score is added as the very last step, before final Export/Share.
Good luck,
Hunt -
How can I add iTunes music to a slideshow I am making and share?
Hi, I am making a slideshow for my daughter's birthday and when I go to add music to it, it does not let me. How can I do this? Thanks for any help! Plumgirl11
Plumgirl,
Use the PowerPoint command Insert > Audio > Audio from file, and navigate to where the audio file is located.
If you don't know where the file is located, right-click the track in iTunes and choose Show in Windows Explorer.
Make sure the song you want to use is in MP3 format. If it is in something else, make an MP3 version, per this document:
iTunes 11 for Windows: Save a copy of a song in a new file format -
I have two iTunes libraries (one under my gmail address and one under my work email address). My work laptop is usually how I access my account and in the past 3 months that laptop has had to be replaced twice, causing me to redo my entire library. Each time, the laptop was not deauthorized, of course and I had to go through all that rigamarole. I have all of my music backed up and am able to also retrieve anything purchased over the years from the cloud, but once i get it set up and authorize the laptop to both of the email address accounts, some of the items that are in the gmail library will not play. It says that it cannot locate. At one point, a friend spent a lot of time getting it to finally recognize everything (a lot of that music that said cannot locate was from burned CD's or mp3s downloaded, not purchased from iTunes). So there is that issue and I'm not sure how to fix that.
The other thing is that I would like to have ALL of my items under one iTunes account (my personal gmail) in the event that i no longer work for this company and have no access to that email address as it will be turned off. How can I remove one email and merge all purchases over to the gmail address account?
Thanks!You cannot combine actual accounts (as in iTunes Store account).
You can combine the music into a single iTunes collection on a computer. There's many ways to do this. There are some utilities to assist with keeping maximum metadata (ratings, playcount, etc.) but I am not familiar with Windows platform ones to do this, though I am sure a web search of merge iTunes library would uncover some. -
How can I add a facebook "like" button to my website?
I just got the like botton code from facebook developer, but don't know where to drop it in iWeb. I would like the like button to appear in the contact page of my website: gingerbirdstore.com
Please help to get this working.
Thank youadd the following into html snippet and click apply button:
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "http://connect.facebook.net/en_US/all.js#xfbml=1";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
<div class="fb-like" data-href="https://www.facebook.com/gingerbirstore" data-send="true" data-width="450" data-show-faces="true"></div> -
i am creating a site for a carnival. I need people of wealth to buy tickets to the event. they don't even know what paypal is and will not go through the trouble of setting up an account. I just want to be able to uses an outside payment gateway. I am so new to site building please speak is simple terms. I'man old dog trying to learn a new trick...Any help would be almost worshiped at this point...LOL
Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ??? -
How can i add a new row in System Matrix passing itemcode and quantaty
Hi All,
I have to add new lines in the matrix system only through the itemcode and item quantity. I tried several ways without success. Maybe the following code help to explain what I'm trying to do.
Someone already inserted rows in the matrix system? Can someone show me how I can do. This example is in C# but if someone has in VB I will apreciate.
FormUID = SBO_Application.Forms.ActiveForm.UniqueID;
f = SBO_Application.Forms.Item(FormUID);
try
SAPbobsCOM.Recordset oRS;
oRS = ((SAPbobsCOM.Recordset)oCompany.GetBusinessObje
SAPbobsCOM.BoObjectTypes.BoRecordset));
oItem = f.Items.Item("38");
oMatrix = ((SAPbouiCOM.Matrix)(oItem.Specific));
oEditText = ((SAPbouiCOM.EditText)oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount - 1).Specific);
string Codigo = oEditText.Value; //Select the item number to use in strQuery
strQuery = "SELECT U_ART_COM FROM [@SB1EVOL_COMPOSTOS] where
U_ART_PRI='" + Codigo.ToString();
oRS.DoQuery(strQuery);
if (oRS.RecordCount > 0)
oRS.MoveFirst();
numart = oRS.RecordCount;
f.Freeze(true);
for (j = 1; j <= numart; j++)
try
ItemCodeTXT = oRS.Fields.Item(0).Value.ToString();
oEditText = ((SAPbouiCOM.EditText)(oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount).Specific));
oEditText.Value = ItemCodeTXT.ToString();
f.Update();
oRS.MoveNext();
catch (Exception oEx)
f.Freeze(false);
f.Update();
MessageBox.Show(oEx.Message + " j = " + System.Convert.ToString(j));
j = 0;
f.Freeze(false);
f.Update();
In this example i try to add rows in Invoice matrix.
Thanks in advance.
Edited by: Luís Filipe Duarte on Jun 26, 2009 4:14 PM
Edited by: Luís Filipe Duarte on Jun 26, 2009 4:17 PMViva Vitor,
Antes de mais obrigado pela resposta.
È esse mesmo o meu objectivo. Passo a explicar qual é o objectivo deste desenvolvimento. O que se pretende é que quando um utilizador escreva o código de um artigo numa linha da matrix de um documento de venda o add-on vai ler esse artigo e de seguida consultar uma tabela de utilizador que ja esta criada para validar se esse artigo tem outros artigos associados, e se tiver, entao o addon tem que os escrever nas linhas imediatamente a seguir. Eu queria mesmo, era escrever qual era o artigo e qual a respectiva quantidade. Eu consigo encontrar qual o artigo que o utlizador escreve e qual os artigos associados. O meu problema acontece quando tendo adicionar as novas linhas.
Com o codigo que se segue podes ver que estou a atribuir a uma EditText o codigo do artigo a escrever. O problema é se correr em modo debug consigo ver que a aplicação chega a essa linha
oEditText.Value = ItemCodeTXT.ToString();
e volta para trás, ou seja entra num loop e nao sai daqui.
if (oRS.RecordCount > 0)
oRS.MoveFirst();
numart = oRS.RecordCount;
f.Freeze(true);
for (j = 1; j <= numart; j++)
try
ItemCodeTXT = oRS.Fields.Item(0).Value.ToString();
oEditText = ((SAPbouiCOM.EditText)(oMatrix.Columns.Item(3).Cells.Item(oMatrix.RowCount).Specific));
oEditText.Value = ItemCodeTXT.ToString();
f.Update();
oRS.MoveNext();
catch (Exception oEx)
f.Freeze(false);
f.Update();
MessageBox.Show(oEx.Message + " j = " + System.Convert.ToString(j));
Eu para adicionar uma nova linha o que tenho de fazer? não vasta passar a informação do item code?
Este desenvolvimento é para implementar ecoreee no sap. Nao sei já tiveste alguma coisa dessas entre mãos.
Obrigado mais uma vez pela atenção. Espero também um dia poder ajudar.
Com os melhores cumprimentos.
Luis duarte
Maybe you are looking for
-
The Mac version of my Air app works fine, so does the iPad version, but the PC version has been a bit of a nightmare. I keep getting the error "1172:Definition com.adobe.crypto could not be found", when I publish it. Basically the 'com' folder is in
-
I rented a movie through iTunes and it downloaded but won't play.
I rented a movie through iTunes and it downloaded but won't play. It is present in the videos app but doesn't load the picture for the movie. When I go to play it, it just opens and then closes. There is an iCloud icon that suggests the movie has not
-
Session data not carried over. with IE6SP1 and WL7
Hi, We recently upgraded our clustered WL to WL7x and after that we started seeing a strange problem regarding session data of our HTML/Servlet pages. When we access the pages through this cluster, the session data(browser cookies not accepted) is no
-
What's the best way to import pieces of a DVD?
I have about 20 DVDs of my family and kids and I'm trying to put together a little diddy with a lot of various clips of them into one movie, but I'm not sure the best way to do it. I really don't want to drag each DVD into my PowerBook and work from
-
Hi, We have a report which will trigger an email with an excel attachment. We are using the FM u2018SO_NEW_DOCUMENT_ATT_SEND_API1u2019. If a column have numbers more than 9 digits, it is displayed with an exponential notation in the excel file . We w