How can I add my Sold to field in the infocube via transformation if it is a separate infoobject?

Hello all,
Really need your help...I want to include the Sold_to field in my Revenue BEx query but it is not available in the infocube I am sourcing from. It is however in BW as a separate infoobject. Is it possible to include the data in my infocube by adding a field to transformation and sourcing it from 0SOLD_TO? If so, how can it be related to the current data in the infocube (i.e. meaning how will it know which records are applicable to the said Sold to fields if there is no document number in the cube. 
Please advise if possible or if there are better options which would not require updating the standard datasource 0CO_PA_1.
Thanks!

Hi,
Sorry, Unable to understand your requirement....however below are options which probably may help you:
1) Add Sold to Infoobject in Cube...Enhance your datasource write logic to populate the datasource field and map accordingly.
2) Add Sold to Infoobject in Cube...Write Routine/Read Master data to populate in the cube....you should have logic and relationship to derive the same.
Regards,
Mayank

Similar Messages

  • How can i add addtional user defiend fields in infoset

    Hi,
    Can any one tell me how can i add addtional user defiend fields in infoset and make it availible in output screen.
    Also please tell me to create parameters through abap quary sq02 , as by default it creates select-option.
    With Thanks n Regards,
    Ranu

    Hi,
    As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
    Regards
    Nitesh

  • I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

  • How can I add a dip to white at the beginning of a clip?

    How can I add a dip to white at the beginning of a clip?  I know where to find it on Pr, but I'm new to AE.  I have 2 clips that need to transition one to the other.  The first clip ends by dipping to white; therefore, I need to either dip to white at the beginning of the 2nd clip & line them up so they overlap well, OR I need to find a white transition to place between them like in Pr.

    Make a whote solid.  Animate its opacity from 0 to 100 and back again.
    You'll use couple-three layers -- no automatic transitions in AE.  That's what Premiere's for.

  • How can i add an Engraving after i order the ipad ( add, not edit)

    how can i add an Engraving after i order the ipad ( add, not edit)

    Sorry, I don't mean to appear rude, but I don't understand the question. What do you mean "how do you call"? You pick up the telphone and call the store's number, just as you would any other person or company.
    None of the Apple Stores have on-line chat.
    Regards.

  • How can I add "Edit with Photoshop CS5" to the Edit With options?

    How can I add "Edit with Photoshop CS5" to the Edit With options?

    I think it has something to do with the order in which the PSE and PS are installed on your machine.
    For me, I can see option for editing in photoshop both in edit menu and from the action bar. I probably had Photoshop installed on my system before PSE

  • How can I add photos from Camera Roll to the Photo Stream album?

    How can I add photos taken during the past month from my Camera Roll to the Photo Stream album?

    Hi,
    It's easy to do in iPhoto11 (click on a photo in iphoto and select share in the bottom right corner, then select Photo Stream), I'm not sure you can do this on the iphone.
    Regards
    Keith

  • How can i add another mesh on top of the previous mesh

    Hi :
    I was trying to add multiple mesh on top of the previous mesh, not replacing the previous ones.
    Can any one help me please?
    Steve

    Steve,
    It seems that Mylenium is out.
    How can i add one more same object on top of the existing one to add mesh on top of the existing one ?
    You may Ctrl+C+F/Cmd+C+F and then set Fill and Stroke to None (at the bottom of the Toolbox).

  • How can I add a Progress bar to show the "render to JPG" progress?

    Hi everyone, I have a button which renders my component to
    JPG.
    How can I attach a progress bar to show the progress of the
    rendering?
    <mx:Button label="render" click="renderasJPEG ()"/>
    public function renderasJPEG( ):void
    convertToImage( component001, new JPEGEncoder( 100));
    private function convertToImage( object:IUICompon ent,
    encoder:IImageEncod er):void
    var base64string: String = ImageSnapshot. encodeImageAsBas
    e64(
    ImageSnapshot. captureImage( object, 72, encoder));
    var variables:URLVariab les = new URLVariables( );
    variables.encoded = base64string;
    variables.type = "jpeg";
    var request:URLRequest = new URLRequest(" script_saveasima
    ge.php");
    request.method = "POST";
    request.data = variables;
    navigateToURL( request, "_blank");
    Thanks in advance.

    Hi,
    I would have thrown a prompt to the user in the renderasJpeg
    function and removed it in last line of convertToImage function.
    Isn't this what you want?
    Hope this helps.

  • How can I add a default shipping charge to the checkout?

    I am sure this is pretty simple, but one of my clients needs to add a default £1.00 charge to all orders at the checkout page. Is this possible? If so any help would be appreciated?
    Thanks,

    Is this like a handling fee or is it for shipping?  If you arent' using shipping fees you could setup a shipping rate of $1.
    If you are using shipping rates alreay and want this to be more of a handling fee I think you can just add a handling fee to each product as outlined in this thread: http://forums.adobe.com/message/4878177
    You can add a default handling charge in eCommerce > Shipping Options.  There's a link to show more options on that screen and that will show you the Handling Charge field but it will automatically add it to all orders' shipping costs.
    I also found a thread where Liam suggests creating a product for the flat fee you want to add and hiding it on your checkout page and then adding that product via javascript to the cart: http://forums.adobe.com/thread/1160775
    The easiest way would be to add the handling fee in the first link.

  • How can I add more than five URLs to the address bar drop down list?

    How many URLs can the Awesome Bar hold in the drop down list? I was showing five, but when I tried to add a sixth by cutting and pasting the URL in the address bar and clicking "Enter", it did not show up. Can the Awesome Bar hold more than five?

    It is possible that you have an extension that sets this value to a lower setting than the current default of 12.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How can we change value of a field in the Repeating Table using SharePoint Workflow 2013.

    Hi
    I have an InfoPath form published on a SharePoint Library. The form contains a Repeating table and after submit a workflow runs. In this workflow I want to change some values of the fields within Repeating table.
    How can I do this?
    Thanks.

    Hi,
    I found a similar thread posted by you here:
    http://social.technet.microsoft.com/Forums/en-US/e1fa36c1-cb5c-456d-ba40-2f26301913d2/how-to-loop-through-each-row-in-a-repeating-table-using-sharepoint-workflows?forum=sharepointgeneralprevious
    I suppose both the threads are reuqesting the method to get values from repeating table via workflow, so we can focus on the issue on the other case. If there is more requestment here, let me know.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How can I add dots after text to fill the remaining space in a table cell?

    What is the most efficient way to add dots after text to fill the remaining space in a table cell? I know it is possible using tabs but is this possible using a table?

    You can put a tab inside a table cell using Option+Tab
    Then just set the right-aligned tab stop and the right edge of the table cell and add the leader.

  • How can I add search parameter "Partner Function" to the inbox in ICweb?

    Hello
    I need to add search parameter "Partner Function" to the inbox ICweb search.
    Today I can search for My open transaction.
    The meaning of "My" in the EM Responsible parameter is that my BP number assign to any transaction in any partner function.
    I wont to limit the search to look in a particular partner function. for example: 00000014 Employee responsible.
    I mean in hardcode and not as a parameter selection screen.
    I know that this functionality exist in CRM5 but i am in CRM4
    Thanks
    Merav

    Hi Darren,
    I have implemented this BAdi and when I am trying to activate this it is giving me short dump saying 'SYSTEM_CORE_DUMPED', please help.
    During the course of my actions I implemeted this BAdi using transaction SE19, the activated this it is activated correctly, then I did some changes in method 'CUSTOM_HIT_LIST_SORT' but then whenever I try activate either the metod or the implemetation it is gives me a pop up saying 'Work Process restarted, session terminated' and the session terminates. On ERMS web page I see the Rabex error and in ST22 I see the SYSTEM_CORE_DUMPED error with following dump details
    Runtime Errors         SYSTEM_CORE_DUMPED
           Occurred on     07/21/2006 at 09:07:51
    Process terminated by signal 0.
    What happened?
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "ZCL_IM_TTT_IC_INBOX_BADI_2====CP " had to be
    terminated because the ABAP
    processor discovered an invalid system state.
    Information on where termination occurred
    The termination occurred during generation of the ABAP program
    "ZCL_IM_TTT_IC_INBOX_BADI_2====CP ".
    The point of termination was in line 5 of the ABAP source code of the
    (Include) program "CL_CRM_AUI_ENTITY=============CU ".
    of the program "CL_CRM_AUI_ENTITY=============CU " (when calling the editor
    50).
    Source code extract
    000010   class CL_CRM_AUI_ENTITY definition
    000020     public
    000030     inheriting from CL_CRM_BOL_ENTITY
    000040     abstract
         >     create public .
    000060
    000070   " public components of class CL_CRM_AUI_ENTITY
    000080   " do not include other source files here!!!
    000090   public section.
    000100
    000110     interfaces IF_CRM_IC_CONTACT .
    000120
    000130     methods ACCEPT
    000140     abstract
    000150       importing
    000160         !IR_ENTITY type ref to CL_CRM_BOL_ENTITY
    Please help.
    Regards,
    Tarun Goel

  • How can I add an external com libraries to the project

    Some exported files that I'm using has
    package com.heaton.bot
    How do I add this package to JDeveloper 9.0.3.4?

    In your project (double click the project in the System Navigator pane) you have the ability to add directories to your class path or source path. Configurations->Development->Paths for .class and Common->Input Paths for .java.

Maybe you are looking for