How can I add the Display name on Directory Number

I created a New Directory NR ( 3131 ) and I put  a  name to Alerting Name/ASCII A Name and on the Forward All
00xxxxxx, but vhen I call the Directory Nr from a Cisco Phone i see on my display the nr from froward, how can I set up from CallManger to see  the name which I put to Alerting Name/ASCII A Name. The nr 3131 is even in the Avaya system.
Thanks a lot

Thanks fro y reply,
The problem is that the nr. 3131 dosen't have a MAC/IP address, it was created in Directory Nr. not on the Device/add device, the nr was created to be able to call Avaya agents and the user to not see the personal agent nr ( 3131 ), only the name. The problem is  when a place a call the nr from forwarding appears on the display instead the name I put ( Test ).
Thanks

Similar Messages

  • How can I add the controller name in the subject of Alarm emails? PI2.1

    How can I add the controller name in the Alarm emails in PI2.1?  This would make it much easier to scan the mailbox and see what devices are affected.

    Thanx for your reply. No, although helpful, that's not what I meant. In outlook, the first line of the header contains the full username follow by a horizontal line. Under that, the default headers like To:, From:, Subject: etc follow.
    I need that firstline printed so we know instantly from which user the email was printed (the To: field often is the same name of the sender of the mail, therefor you won't know WHO printed it...).

  • How can I change the display name of a contact in my address book?

    If I open one of my contacts in the Address Book, the display name is the name of the organization. I want it to be the last name of the individual. How can I change that?

    Thank you for your reply. I realize from your answer that I didn't poise my question properly! If I have not entered anything in the 'Display name' field then the message header (i.e. the title of the business card) follows by default the name of the 'Organization'. I wanted to know if it's possible to change this so that the message header of the business card follows the 'Last name' of the person and not the name of the 'Organization'. Thank you!

  • How can I change the display name when I call someone?

    I recently gave a re-provisioned 8300 to a new employee. I wiped out the phone, and re-setup the phone in our exchange server to match the new user's settings.
    The only problem he's having is that when he calls someone, the display name shows the previous users name as the person calling.
    How do I change that?
    Thanks in advance,
    howe132

    You don't say what model the device is, but if GSM, make sure the SIM card has not been edited to the preview name.
    Options > Advanced > SIM card > Menu > Edit Sim Phone Number
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I add the date at the top of the screen along with the day and time display?

    Hello,
    How can I add the date at the top of the screen along with the day and time display?
    Thanks so much!

    Open System Preferences>Date & Time:
    Ciao.

  • How can I change the displayed account name under mailboxes in my mail post iCloud merger?

    How can I change the displayed account name under mailboxes in my mail post iCloud merger?

    Hi ..
    You would have to sign out in order for your account name to not be visible.
    Click your account name then click Sign Out.

  • How can i add the check box beside the directory?

    how can i add the check box beside the directory? anybody can help?
    tis r the panel of my program :
    // FileTreePanel.java
    // JPanel for displaying file system contents in a JTree
    // using a custom TreeModel.
    package com.deitel.advjhtp1.mvc.tree.filesystem;
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.tree.*;
    import javax.swing.event.*;
    import com.deitel.advjhtp1.mvc.tree.filesystem.FileSystemModel;
    public class FileTreePanel extends JPanel {
    private JTree fileTree;
    private FileSystemModel fileSystemModel;
    private JTextArea fileDetailsTextArea;
    public FileTreePanel( String directory )
    fileDetailsTextArea = new JTextArea();
    fileDetailsTextArea.setEditable( false );
    fileSystemModel = new FileSystemModel(
    new File( directory ) );
    fileTree = new JTree( fileSystemModel );
    fileTree.setEditable( true );
    fileTree.addTreeSelectionListener(
    new TreeSelectionListener() {
    public void valueChanged(
    TreeSelectionEvent event )
    File file = ( File )
    fileTree.getLastSelectedPathComponent();
    fileDetailsTextArea.setText(
    getFileDetails( file ) );
    JSplitPane splitPane = new JSplitPane(
    JSplitPane.HORIZONTAL_SPLIT, true,
    new JScrollPane( fileTree ),
    new JScrollPane( fileDetailsTextArea ) );
    setLayout( new BorderLayout() );
    add( splitPane, BorderLayout.NORTH );
    JCheckBox check = new JCheckBox("Check me");
    add( check, BorderLayout.SOUTH );
    public Dimension getPreferredSize()
    return new Dimension( 400, 200 );
    private String getFileDetails( File file )
    if ( file == null )
    return "";
    StringBuffer buffer = new StringBuffer();
    buffer.append( "Name: " + file.getName() + "\n" );
    buffer.append( "Path: " + file.getPath() + "\n" );
    buffer.append( "Size: " + file.length() + "\n" );
    return buffer.toString();
    public static void main( String args[] )
    if ( args.length != 1 )
    System.err.println(
    "Usage: java FileTreeFrame <path>" );
    else {
    JFrame frame = new JFrame( "JTree FileSystem Viewer" );
    FileTreePanel treePanel = new FileTreePanel( args[ 0 ] );
    frame.getContentPane().add( treePanel );
    frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    frame.pack();
    frame.setVisible( true );
    }

    You can maybe explore button and forms feature in InDesign. It was added in CS6.

  • How can I alter the display colours on ios7

    How can I alter the display colours on my iphone and iPad. The new white grey with some bright colours is driving me mad. I have vision problems and this new theme is making it very difficult to use. Turning brightness down doesn't help.

    Thanks fro y reply,
    The problem is that the nr. 3131 dosen't have a MAC/IP address, it was created in Directory Nr. not on the Device/add device, the nr was created to be able to call Avaya agents and the user to not see the personal agent nr ( 3131 ), only the name. The problem is  when a place a call the nr from forwarding appears on the display instead the name I put ( Test ).
    Thanks

  • In ST03 , how can i see the Query name, user id,how many times .

    HI Experts,
    In ST03 , how can i see the Query name, user id,how many times executed the query.
    these details how do i get from the above transaction.
    Points will be awarded.
    BR
    sivs

    Hi Siva,
    Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
    Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
                    Check here...........
    http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
    Hope this will help you shiva.........
    Regrads,
    Vijay

  • How can I add the hard drive icon to the menu bar on a MBPr

    How can I add the hard drive icon to the menu bar on a MBPr?  I have downloaded Google Earth and it wants me to drag it to the hard drive for install. I was able to display the icon but now I would like to put it on the menu bar. Is this possible? Or can I add it to the hardware section under system preferences?
    I'm a new Apple user, coming out of the dark ages of a lifetime in the PC Windows world.
    Thanks

    It's on your Desktop, is it not? You cannot put it on the menubar through OS X although you may find third-party utilities that will. If you want it on the Desktop:
    Select Preferences from the Finder's Finder menu and check the desired boxes:
    Click on the Sidebar icon in the toolbar to set what you want displayed in the Sidebar.

  • How can I get Sender Display Name using Get-MessageTrackingLog?

    Hi, could you please help me. We have got a monitoring system at work which monitors some devices, so if something wrong happening with these devices email is sent from MASTER email (Customer Name <[email protected]>) to us. I'm trying to get a list
    of all emails of that monitoring mailbox using PoweShell command
    Get-MessageTrackingLog and export them to CSV file. In the end of the day I need CSV file with 3 columns: TimeStamp, MessageSubject and SenderDisplayName! Yes, I need Sender Display Name cause all emails are sent from one MASTER email
    (Customer Name <[email protected]>) and only difference between them is sender Display Name which is cexactly what I need.   
    This is the code I'm using:
    Get-MessageTrackingLog -EventId Receive | Select Timestamp, MessageSubject, Sender | Export-CSV C:\NagiosAlerts.csv
    –NoTypeInformation
    So how can I get sender Display Name(Customer Name) using Get-MessageTrackingLog insted of Sender email (<[email protected]>)? 

    The DisplayName is not recorded in the Logs only the EmailAddresses are so there Is nothing you can do with Message Tracking to get this the way you want. You need to look at another property may soureIP or include something in the Subject
    of the Email (eg a customerId in the Subject is a much better option) to give you some differentiation. Otherwise you need to access the Email directly from the Mailbox it was sent to and then extract the DisplayName from the message (or use a journaling
    on those emails etc)
    Cheers
    Glen

  • How can I edit the file name of the home page?

    How can I edit the file name of the home page?
    Gr Ammani

    I have a similar issue with regards to the filename...
    When I navigate to my website, it doesnt work unless I actually type the filename at the end of it. Example: type in "www.whitelion.com" (this is my real domain name) and it doesnt work. When I type in "www.whitelion.com/index.html" then it works.
    This is obviously inconvenient because my clients will never know to add the filename to the end of the site.
    Is there any setting or way to get the page to appear by just typing the original domain name without adding the extension?
    Thanks,
    Emelia

  • How can I get the inbox name of exchange?

    I wanna get the letters from exchange server, the code i writed below:
    Session session1 = Session.getInstance(new Properties(), null);
    session1.setDebug(true);
    Store store = session1.getStore("pop3");
    store.connect(pop,-1,popuser,poppwd);
    Folder folder = store.getDefaultFolder();
    folder = folder.getFolder("INBOX");
    folder.open(Folder.READ_WRITE);
    the erro report displayed:
    "no such mailbox in this server"
    and i don't know how can i know the mailbox name in my exchange server? is it "INBOX"?
    any idea?
    thank you!

    You can use the following to get a list of the folders that are on the server. I don't know what rules Exchange uses when accessed through POP3 to name its inbox but you should be able to get a complete list this way.
    =======================================================================
    Folder rf = store.getDefaultFolder();
    if ((rf.getType() & Folder.HOLDS_FOLDERS) != 0)
    Folder[] f = rf.list("%");
    int count1 = 0;
    for (int i = 0; i < f.length; i++)
    System.out.println(f.getName);

  • How can I add the progress loading box when I load a module?

    Hi everyone, how can I add the progress loading box when I
    load a
    module? Is it an automated thing with flex or must I code it?
    Thanks.
    :)

    try using javascript onclick attribute:
    onclick="document.form.name.disabled=false"
    m

  • How can I add the content from a iPod Nano to a new iTunes account

    how can I add the content from a iPod Nano to a new iTunes account

    On the computer in iTunes log into her Apple ID and then see if recent purchases are shown by clicking on her name in iTunes, entering her password and then selecting the option. If there is nothing there then she bought that music with a different Apple ID.
    You can use TouchCopy to move all the songs on the iPod to the computer. Then try to play one of the purchase songs and it should show the account used to purchase it and ask for the password.

Maybe you are looking for