How can i build application using Jdeveloper 10g for Weblogic server 10.3

Hi,
We have a requirement where in we want to build an SOA application using Jdeveloper 10g for Weblogic Server 10.3.
Is there any way to make a connection to Weblogic Server 10.3 from JDeveloper 10g? If there is any way please share it with me.
Thanks,
Amit Kumar

Amit,
SOA Suite is not yet certified for WLS 10.3. You have to wait for the certification of it.
At the moment you can't install the SOA Suite on WLS 10.3 nor connect from JDev 10.1.3 to it.
--olaf

Similar Messages

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

How can I develop EJBs using JDeveloper?

Hi all.
How can I develop EJBs (entity beans) using JDeveloper and deploying them on WebLogic6x
server?
Oracle says that JDeveloper enables to build and deploy applications to the WebLogic
6x, but I can't do that with Entity Beans(CMP).
I established the connection to the WebLogic and to the DataBase and they work.
JDeveloper generate ejb-jar.xml and weblogic-ejb-jar.xml but not weblogic-cmp-rdbms-jar.xml.
How can I build all the necessary xml's files? What I have to do? Exist a pluging
to integrate JDeveloper with WebLogic?
Thanks, and I hope your answers.
Isra

hello,
in reports 6i the charts are created using oracle graphics which stores the chart definitions in a separate file (.OGD). there is not XML interface for graphics.
with reports 9i and the introduction of the BIgraphBean the definition of the chart-properties is also done in XML.
reports 9i will be available with iAS Release 2.
regards,
the oracle reports team

How to create a "pjc" using jdeveloper 10g

Hi guys
I am trying to make my first pjc (pluggable java component) using jdeveloper (default installation with Oracle developer 10g). I was following the [Jdeveloper 9 documentation||http://www.oracle.com/technetwork/developer-tools/forms/index-087743.html] from OTN and got stuck once after creating the PJC1.java
According to the documentation, the property inspector should allow me to change various properties for the newly created .java file and let me add new events with the events tab. In my case, once after I select the java item from UI, the property inspector doesn't show anything. No tabs for properties or events :O
If somebody could point me towards Oracle documentation for Jdeveloper 10g, it would grateful.
regards,
raj
Edited by: rthampi on Apr 27, 2013 8:50 PM

CraigB wrote:
Oracle jDeveloper 10.1.2.1.0 was the last version the inclued the Forms PJC Wizards. All versions after this didn't include them. You can actually develop a PJC using any IDE, but I have found using the PJC Wizard to be extreamly helpful. Java is not my strongest skill and I don't do a lot of Java PJC development so I keep this version installed for when I need to work on PJCs.
Craig...Thank you Craig. We are with Oracle ERP R12 from 2009 June and almost all our legacy applications were either made a part of the ERP suite, or hosted with Weblogic server 10.3.6. As leading the development team, my biggest challenge is making the custom applications migrated to 11g forms/Reports "behave" exactly like the ERP suite.
We wanted to design a parameter screen for the reports, almost like with ERP Suite, where the parameter columns are dynamically created during runtime and the biggest challenge was to limit the MAXIMUM LENGTH for those columns, thus started our venture to find an appropriate solution. After spending almost 20 years in the field of software development, I just didn't want to copy a jar file from the web and get over with it. Instead I wanted to understand what the codes do.
Anyway, Francois was kind enough to provide the .java with his pjc blog and I created a new pjc based on this .java code :) and my objective was satisfied. If Oracle really wants to "kill" the forms/reports, I think they just should do that, instead of removing few highly sought components with so called "Newer versions"
Ridiculously the documentation library for JDeveloper 10.1.0 is empty, even though it is listed with Oracle documentation library.
Cheers guys
raj

How to run OA Application in JDeveloper 10g

Hi.
I am a java developer but new to OA Frame work.
I am trying to write a new Oracle Application in JDeveloper Studio Edition 10.1.3.3.0.3 using OAF. Patch p8431482_R12_GENERIC downloaded from Oracle web site for APPS (R12)
I am using UBUNTU OS. Development is going on UBUNTU OS.
I could create a new OA Work space and a Project.
Also I was able to give the .dbc file of R12.
And also I could connect to the database.
I got a pdf which has instructions of development and I followed that.
But while running the project I am getting the error 'No .dbc file found' though I gave the dbc file.
Can any one help me pls....
Thanks in advance.

Hi,
Get the latest dbc file from instance with the help of DBA
and put it in correct location
Ex.
D:\JDEVELOPER\jdevhome\jdev\dbc_files\secure\xxxx.dbc
Make sure your path is correct.
Regards,
prashant C

Problem in running application(using ADF) on BEA Weblogic Server

Hi..,
I am Gunardy Sutanto from Indonesia. Currently, I had a problem in deploying application which is using ADF framework in BEA Weblogic Server(WLS 8.1). I also add all the libraries which were required for running this application. But I found some error when I ran this application. About the error message that I found from log file which is generated by BEA Weblogic Server 8.1, herewith I attach the detail of the error message :
<Error> <HTTP> <BEA-101020> <[ServletContext(id=27825828,name=bp_presentment,context-path
=/bp_presentment)] Servlet failed with Exception
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 16,408, persistent id 1
at oracle.jbo.PCollException.throwException(PCollException.java:39)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1845)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
## Detail 0 ##
java.lang.ClassCastException
at oracle.jbo.pcoll.OraclePersistManager.updateBlobs(OraclePersistManager.java:1613)
at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1832)
at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
I hope this is enough for somebody for solving this problem. If someone have the solution for this problem, please contact me by e-mail to [email protected].
Thanks,
Gunardy

I already set the value for jbo.server.internal_connection and then deployed to Weblogic Server. When I was tested the application, all the records from table had shown on the screen but I found the application can't insert row to table PS_TXN. I I want to know it always happened?
Herewith I attach the detail log from log file which was generated by Weblogic Server:
oracle.jbo.PCollException: JBO-28030: Could not insert row into table PS_TXN, collection id 162, persistent id 1     at oracle.jbo.PCollException.throwException(PCollException.java:39)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1845)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
     at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
     at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
     at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
## Detail 0 ##
java.lang.ClassCastException
     at oracle.jbo.pcoll.OraclePersistManager.updateBlobs(OraclePersistManager.java:1613)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1832)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:561)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:684)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:643)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:461)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:277)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5119)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5011)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:7741)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:3923)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(ApplicationPoolImpl.java:2161)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(ApplicationPoolImpl.java:1261)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:717)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(SessionCookieImpl.java:634)
     at oracle.jbo.common.ws.WSApplicationModuleImpl.endRequest(WSApplicationModuleImpl.java:2672)
     at oracle.adf.model.bc4j.DCJboDataControl.endRequest(DCJboDataControl.java:1283)
     at oracle.adf.model.servlet.ADFBindingFilter.invokeEndRequest(ADFBindingFilter.java:300)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:249)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
Besides that, I found new error when I was starting Weblogic Server. Herewith, I attach the detail of the error message:
java.lang.NoClassDefFoundError: org/apache/commons/collections/FastHashMap$KeySet
     at org.apache.commons.collections.FastHashMap.keySet(Unknown Source)
     at org.apache.struts.action.ActionServlet.destroyDataSources(ActionServlet.java:769)
     at org.apache.struts.action.ActionServlet.destroy(ActionServlet.java:431)
     at weblogic.servlet.internal.ServletStubImpl$ServletDestroyAction.run(ServletStubImpl.java:1086)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:569)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:596)
     at weblogic.servlet.internal.ServletStubImpl.destroyServlet(ServletStubImpl.java:581)
     at weblogic.servlet.internal.WebAppServletContext.destroyServlets(WebAppServletContext.java:5797)
     at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:5675)
     at weblogic.servlet.internal.ServletContextManager.removeContext(ServletContextManager.java:187)
     at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:706)
     at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:764)
     at weblogic.servlet.internal.WebAppModule.rollback(WebAppModule.java:742)
     at weblogic.j2ee.J2EEApplicationContainer.rollbackModule(J2EEApplicationContainer.java:2942)
     at weblogic.j2ee.J2EEApplicationContainer.rectifyClassLoaders(J2EEApplicationContainer.java:1429)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1176)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
     at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2634)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2584)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2506)
     at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:833)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:542)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:500)
     at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
So, I need someone to sove this problem. I am looking forward for hearing from you.
Thanks,
Gunardy

How can I develop application using multi-language UI?

Hi all.
Do you know how to develop a project which can have multi-language UI (user can switch between languages, for example: English or Franch).
Thanks.

Bsaically by using resource bundles - more detail than that would depend on the actual technologies you are using and the type of application.
Struts for instance has specific Tags for displaying strings out of a resource bundle. JSTL has other tags and JSF does it another way - but they all use resource bundles as properties files or java classes.

How can I make MainStage2 use tempo tracks for older logic tracks?

I am trying to play a recording live that is 5 years in the making. Obviously, Logic has progressed in this time. Anyway, there are tempo tracks for the songs and I can't get MainStage2 to recognize them so I have been forced to add a click track and make them part of the bounce. I might be better off with the click track method since I can push it to one stereo channel and not the other, but I was wondering if there is a way to try and get the tempo information recognized by MainStage2 (perhaps by transforming the old projects into new projects??). I would like to try for one track and compare the pros/cons of the two methods. Thanks in advance.

Wouldn't iTunes be more appropriate for this? There doesn't seem to be any video involved.

How can i build table with two user name columne ?

How can I build view with two columns for user name ( one create and the other
Can change also )
And to display full name ( the user name is the key but not display ) ?

Hi,
Creating View
     From initial screen of data dictionary(T.Code: SE11), enter the name of object i.e. view.
     Select view radio button and click on the push button.
     Dialog box is displayed for types of views.
     Select the view type.
     On the next screen, you have to pass following parameters.
     Short text
     In the table box you need to enter the table names, which are to be related.
     In join table box you need to join the two tables.
     Click on the TABFIELD. System displays the dialog box for all the table fields and user can select the fields from this screen. These fields are displayed in the view fields box.
     Save and Activate: When the view is activated, view is automatically created in the underlying database system. As long as the table exists in the database, the view also exists (Unless you delete it).
Regards,
Bhaskar

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available). Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
If I have to downgrade to LabView 2012, where can I get the installation for this?

How can i build RPMs file for my own Java Application?

How can i build RPMs file for my own Java Application?....I have my own directory that contains all Java Source files and some files that my Application required....I want to build RPMs file like a install File to Linux System, Now my OS is Linux Fedora core 1.....How can i do this?

I think that in order to create a RPM, you'd need to
use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

How can you build time series measures in OBIEE without using TODATE AGO fu

How can you build time series measures in OBIEE without using TODATE and AGO function?
Please provide steps to build time series
measures in OBIEE without using TODATE and
AGO function. Dashboard results not storing
in cache when using TODATE and AGO functions.
eventhough its cached users queries not
hitting cache because queries doesn't match
exact date time when using TODATE and AGO
functions. so I want to build queries using
sysdate and some simple calculations. Please
send your inputs/ideas for my questions..
Thanks in Advance

This can be using Msum function in answers. Use the following formula, here dollars is my metric. Change the formula based on your metric.
Msum("Sales Measures".Dollars ,2) - "Sales Measures".Dollars
the report will be cached and better performed compared with time series. check ti
- Madan Thota

How can I force the use on a specific application when I am in the Downloads window?

I have Vista and Firefox 3.6.15
when I open an email attachment it goes to the intended application but when I click on the downloaded file in Downloads it invokes OpenOffice and then it displays:
"Move background page assignment
The loading of password-encrypted Microsoft Powerpoint presentationsis n ot supported"
How can I force the use on a specific application when I am in the Downloads window?

Hi Frank!
you should catch your save-event and after saving put the following line:
oMatrix.Columns.Item(4).Cells.Item(lstRowIndex + 1).Click(SAPbouiCOM.BoCellClickType.ct_Regular);
that's it!

How can i build a manchester coding in labview signal processing?

how can i build a manchester coding in labview signal processing?
mean to say that how can i digitize my audio input.i waqnt to convert my audio input into manchester coded data format!!!
kindly post related VIs
regards
Solved!
Go to Solution.

idma-
Check out the LabVIEW FPGA example http://zone.ni.com/devzone/cda/epd/p/id/6126
Generate Manchester Signal
Basic example showing generation of a Manchester encoded data stream. The data to be sent is generated in one loop and passed to a FPGA FIFO. The subVI which generates the Manchester data stream reads the data bytes form the FIFO and passes them to the digital output. The subVI prepends a simple header to each data packet which allows a reader (see next example) to synchronize and acquire/parse the data. The header consists of a thee half bit pulse followed by a one half bit pulse. The three half bit pulse is not a valid component of regular Manchester encoding and can therefore be differentiated from the rest of the protocol. In addition it can be used by the receiver to to easily measure the bit rate of the protocol. By dividing the length of the three half bit pulse in half (3/4 of a bit), the receiver has a measure to differentiate between full and half bit pulses in the rest of the protocol.
Generate and Read Manchester Signal
An extension of the previous example which adds a Manchester receiver subVI. You must physically wire the digital output channel to your input channel to loop back the data outside the I/O connector of your FPGA R series card or C series module. The Manchester receiver subVI is expecting the data packet to be prepended by a header as explained in the previous section.
I will see if the is a more precise example but this should help
Sam S
Applications Engineer
National Instruments

How can i build application using Jdeveloper 10g for Weblogic server 10.3

Similar Messages

Maybe you are looking for