How can I burn a movie to dvd when I don't have iDVD on the new macbook pro?

I have recently purchased a macbook pro and I have made a movie in iMovie, however i don't have iDVD as it no longer comes on macs so how can I burn this movie to DVD without this program? Is there a program already on my laptop or do I need to purchase one and if so what can I purchase?

ToastTitanium from roxio
http://www.roxio.com/enu/products/toast/titanium/overview.html?ClickID=dxsztmmzk 0ookbzn2brmtsr2hcomcnhysxrs

Similar Messages

  • How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?

    How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?
    Do I need to buy an adapter? How do I setup the software to make these two system connected?

    r95941081 wrote:
    Thanks for your answering. But the issue is that I'll often transfer a large amount files from PCs to the Macbook, and I'm explring the way to use firewire since there is indeed an i-S400 port in the VAIO laptop, and it's much faster.
    USB 2 is faster than Firewire 400 and USB 3 is faster than Firewire 800
    If it was another Mac you were transferring from then you could use Firewire Target Disk Mode which makes the boot drive of the old Mac appear on the desktop of the new Mac to rapidly copy files, but you have a Windows PC with no FWTDM capability.
    So to connect the two machines requires a network be setup over Ethernet and mucking around with the complexities of all that and it still takes awhile to finish. One can't setup a network with a PC over USB or Firewire, only Firewire with another Mac.
    You get a external USB drive, USB 3,2,1 is fine and just drag and drop copy, the machine does all the work and you go do something else until it's finished, then repeat the same with the Mac.
    Fast simple and effective, let it copy overnight if you have too.
    I routinely clone my entire hard drive via USB 2 and it only takes a hour and a half for 350GB.
    By the time you figure out how to network a Mac and a PC over Ethernet and getting it work to transfer files, you could be done already via USB.

  • How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

    Compass Health Systems wrote:
    How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out?  At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
    No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

  • How can I delete facebook account in settings when I don't have password  and can't retreive it  pressing delet without entering password does nothing

    How can I delete facebook account in settings when I don't have password and can't reset it as not receiving reset email from facebook pressing delete without password does nothing.

    Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address (you shouldn't need to verify the old account).  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

    I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

    All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

  • I bought a movie from itunes. I want to burn to dvd but i can't seem to do that. How can i burn my movie to dvd?

    How do i burn a purchased movie to dvd?

    JustinV72 wrote:
    How do I get the audiobook onto my iphone without erasing anything?
    You transfer the purchases to the computer you use to sync the iPhone.  You can use a thumb drive or an external HD, etc.  Read this: iTunes for Mac - How to copy purchases between computers:  http://support.apple.com/kb/HT1373

  • How do I transfer iMovie projects to dvd if I don't have iDVD?

    I compile a year's worth of home movie clips into one DVD every year to distribute to grandparents. I had used my mom's Mac that had iMovie and iDVD but finally bought my own macbook pro so I could do the project from the comfort of my own home. What a surprise that when I finished this year's movie in iMovie, I couldn't transfer it to a dvd!!! Any suggestions?

    Hi
    or in my words
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • How can I find my PS5 serial number if I don't have access to the original box?

    How can I find my PS 5 serial number - in order to join CC. I'm moving house and my original box and disk are packed away somewhere.

    If you have registered your purchase with Adobe you should be able to find the information you seek by clicking on the red A logo at the top of this page, then clicking the My Adobe link and looking in the My Products section.
    -Noel

  • How can I dial a Unity subscriber extension when they don't have an assigned IP phone?

    I have set up our warehouse staff to share centrally placed IP phones by setting them up in Exchange and as a Unity subscriber and then configured the Call Transfer page to ring the extension of the phone closest to where they work in the warehouse.  This works great except you have to go through auto attendant to dial their assigned extension to have it ring where it would be desirable to be able to look them up in the Corporate Directory and dial, but if I do that, it just goes to their voicemail.  Is there a way around this?

    You could set up a dummy phone record for each user and then use the Call Forward All or Call Forward Unregistered field(s) to forward calls to the phone closest to where they work in the warehouse (just like you have in Unity for transfers).  Then if you look the user up in the directory and dial them, the call forward would take effect.
    Hailey
    Please rate helpful posts!

  • How can I set up my time capsule when I don't have access to our building's wireless router?

    Our apartment includes internet but we do not have access to the router. We only want to use the time capsule to back-up our computer not as a wireless router. We have tried setting it up but the light flashes amber and it cannot set-up.

    Cannot by ethernet for the first setup..put the TC in bridge mode and it should work fine.. There are a lot cheaper solutions to do this than a TC though.

  • If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

    If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

    The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20)  into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
    If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
    What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
    Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
    Thank you again for your help and wisdom.

  • IMovie does not "share" to iDVD. How can i burn an iMovie to DVD?  I do have a copy of iDVD on my Mac

    IMovie 11 does not "share" to iDVD. How can i burn an iMovie to DVD?  I do have a copy of iDVD on my Mac

    My advice, keep iDVD on your Apple Mac as it is a great software and let's hope Apple will introduce it again in imovie 10.  Since you may have imovie 10.0 (2013) up-dated from imvovie 9.0 (which included iDVD for burning your home made films on imvoie 9.0,)  you can proceed as follows to burn it on a DVD:
    a) your film is completed on imovie 10.0.  Under share transfer it to "Theatre" (default).
    b) open iDVD  and drag the film ex "Theatre" on the space "movie" of i.DVD. 
    c) Inser a DVD and clic on "burn"...
    It worked for me.

  • How can I burn a CD or DVD for regular data files?

    How can I burn a CD or DVD for regular data files using anything other than itunes?

    If you need simple burning, do as Robert said. However, if you need more advanced options, take a look at Roxio Toast 10 Titanium. There is also a Pro HD version if you need more video burning options.

  • How can I burn a movie to external hard drive or thumb drive

    how can I burn a movie to external drive or thumb drive?

    how about using Handbrake to burn to a disk?

  • Created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read

    created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read.  I am using a dvd-r dvd and my dvd player says that it uses this type of dvd.  Any suggestions.  I spoke to an Apple Support person who helped me burn the dvd but it still didn't work...help???

    There's a difference between a data DVD, and a DVD-Video.  I believe you made a data DVD, which can't be played in a video player.  The Burn feature of the Finder can't author a DVD-V, just data discs.   
    I assume you made a Project, and put clips from your Event Library into the Project.  But then, how did you output your Project, using the SHARE menu? 
    When I pull down iMovie '11s SHARE menu, "iDVD..." is one of the options.  It's the job of iDVD to make the menu that appears when you insert a DVD into your player (that says the title, and chapters, and extras, etc.).  You need software that will made a DVD-V disc.  Lacking that, you might be able to go to Share/Export Movie... or Share/Export using QuickTime... to get your video into a format that software like Roxio's Toast could burn. 

Maybe you are looking for

  • Error in sending a binary outputstream to the browser

    I am looking for information on sending a binary outputstream to a browser.I am not getting any error and am able to write out the entire buffer.Even though the browser recognizes the mime type,it only sends junk to the client.Please look at the code

  • Can an XML file be converted into something I can merge?

    Hello, all. I'm trying to help my coworker, Dolly, solve a problem with LiveCycle, but confess up front that I know little about it. I frequent these forums to help and get help with other programs (Photoshop, InDesign, AfterEffects, etc.), but I usu

  • Q? how to change filename of receiver adapter includeing payload attribute?

    hi all. our scenario is IDOC - XI - FILE. IDOC is standard type .xml" Despite of searching help library, just read about how to change using payload value. How to change the filename using payload attribute? Message was edited by: ChangSeop Song

  • Exchange 2010 DAG backup & Transaction logs

    Hi,  What is Microsoft recommended best practise for Exchange DAG group backup in an environment where there are Active & multiple (2-3) passive copies of the databases? Is it a good practice to backup transaction logs as frequently as possible in ad

  • To change the status of the KANBAN

    Hello Experts, Please let me know how to change the status of the KANBAN from empty to full. Thanks in advance Best Regards, zubera