How can I burn audible book to disc with chapters?

When I burn an audible book to disc, instead of chapters itunes breaks the recording into 7 minute tracks. The chapter information is there in itunes - I can see it and navigate using it. What am I doing wrong?
Any help appreciated!

Hi Joanna,
What Adobe application are you working with? Are you working with a PDF file in Reader or Acrobat? Is the Save As command available? If you are using Acrobat/Reader, is the PDF password protected (do you see SECURED in the title bar)?
Best,
Sara

Similar Messages

How can I burn a file to disc?

How can I burn a file to disc when the "Save" command is grayed out and can't be used and the Ctrl+S command doesn't work?

Hi Joanna,
What Adobe application are you working with? Are you working with a PDF file in Reader or Acrobat? Is the Save As command available? If you are using Acrobat/Reader, is the PDF password protected (do you see SECURED in the title bar)?
Best,
Sara

How can I burn a disk of photos with a modified file name?

After importing photos from scan device, I use Photos > Batch > Change to rename files. When burning a disk the changed file names do not transfer with the image but use the original file name. How can I burn a disk of photos with the modified file name?
This is what I have done so far with no success.
Drag selected photos from Event to Burn Folder where the file names were changed. Burn folder lists file with original file name.
Drag albums to Burn Folder with the same result.
In Filer I am able to change the iPhoto Library > Master > Date > Filename and then drag to burn disk folder and see the changed name but this is a single file exercise without a view of the file's image, but to use the new file name in iPhoto events I have to repeat the naming convention.

File > Export.
In the resulting dialogue note the "Name" section. Choose to use the Title as Filename.
Regards
TD

HT200139 ?How can i watch a blu-ray disc with my iMac

I accindentally bought a blu-ray, ok, but now I see it... How can i match a blu-ray disc with iMac?

Youneed some bluray software such as this:
http://www.macblurayplayer.com
I use and it seems OK, plays a wide variety of formats.
Al

HT4059 How can I trsnfer CD books so disc 1 is followed by disk 2 and so on? now they are all over the place and not how I loaded them

How can I load CD books so they are in sequence 1 followed by 2 and so on nowthe load so they are scattered all out of sequence?

In Preferences check "scale strokes and effects"

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

How do I burn a DVD R disc with Windows Movie Maker? It indicates disc error on my DVD player. Someone thought it had something to do with Itunes? I reloaded Itunes 1 month ago and had no problem creating this disc then. Help

I have made several DVD+R discs in the past using Windows Live Movie Maker sucessfully. I made one about one month ago for my son's b-day. I am using the same discs as I had then. When I tried to burn the disc, it indicates that it is burning, however, when I insert it into the DVD player at home on our TV (like I"ve always done), it indicates disc error. Someone mentioned that the burner goes out every now and then when Itunes is uploaded? When I burn the disc, I can pull it up on my home and work computers, so I know that it is there.

Yes, you can distribute a burned disk of the project to those who can create duplicate disks. Or create a disk image of the iDVD project using the File ➙ Save as Disk Image menu option.
Then you can distribute the disk image to those who will burn the disks. For PCs you'll have to convert the .dmg file to a .iso file so they can burn it. This website describer how: Mac Help - Convert and Burn Mac .dmg or .img to .iso Windows PC-Compatible Disk Image
Suggest to them to burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
It would be prudent to rest your optical drive for about 30 minutes after burning 3 disks in a row. That will give the laser time to cool down before you start another batch.
OT

Can't Burn Dual Layer BD Disc with Share Option

I burn bluray discs from FCP 7 using the "share" option, and each time I do it, it's a crapshoot whether it will work or not, particularly with dual layer discs (50GB) as is the case now.
Bacially, after waiting the 15 hours for the files to output, I am greeted with the following message: "There was an error burning your disc. Please check to see if your boot volume has sufficient space." At that point I try reloading the disc and click "Try Again", but the same thing appears. I know I have more than sufficient space on my hard drive, as well as on the bluray itself (the H.264 video file is only 26gb). I also load the BD disc proir to starting the Share as I've been told that this is how the program knows you have a large enough disc capacity.
Here are the specs of what I'm using. Perhaps they can offer some insight:
iMac Intel Core Duo with most recent Snow Leopard
Buffalo BRHC-6316 Bluray/HD DVD Combo Drive
Verbatim Dual Layer Recordable 50GB Disc (6x speed)
Any help is much appreciated.
Thanks!

SHORT ANSWER: Try a different BRAND of BD-R. Worked for me!
LONG ANSWER: I wanted to be sure to post on this older thread because I just experienced this same error/problem burning blu ray out of FCP7 through the share function. I've been doing it successfully for years now, so when the "error" popped up (and kept popping up) I was surprised and dismayed. The GOOD NEWS is I found a solution. After trying the operation on several Macs (Mac Pro tower and a MacBook Pro), and after getting the error in both places, I was quickly of the mind that it couldn't be a boot memory issue. Neither of the Macs had any memory deficiencies. So, my next guess was it was the media itself. I purchased some Memorex single layer 25GB disks and... problem fixed. For your information, the disks that gave me the error were WINDATA BD-Rs (they don't say how many G they are) purchased at Micro Center. I will say they were cheap and the Memorex were not (so I suppose in this case it is true you get what you pay for). Hope this helps somebody!

How can I remove downloaded books in iBooks with ios 8?

There is no edit function in iBooks after updating to ios 8. Removing or moving downloaded books is impossible.

select displaying books as list (top left button)
on the book you want to delete, tab to left and click delete.

Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

How can I burn more than 1 movie to a DVD when there is room on the disc for it. Premiere wants to overwrite once 1 movie is burned to the disc

How can I burn more than 1 movie onto a DVD? Once 1 movie is burned successfully to the disc, I try to burn another movie and Premiere wants to overwrite the first movie. One movie is 1.2 GB, second is 2.3; so there is room on a 4.7 GB DVD-RW.

susang
What you report is what it is.
Each burn to of Timeline content to DVD-VIDEO format on DVD disc results in the disc containing one OpenDVD Folder and one VIDEO_TS Folder.
Only one VIDEO_TS Folder can be put on a DVD-VIDEO disc even when Premiere Elements is not involved. I have seen that written about online, and I have
never found a way to overcome what seems to be basic behavior description of DVD-VIDEO..
Premiere Elements will allow you to write to a disc with content already on it, but only after you give the OK for erasing the disc content before going ahead
with the burn to.
If you have several movies, one possibility is to build a Timeline with the movies, use stop markers, and setup disc menus according so that the viewer
can selectively watch the movies. More on that later if wanted.
Any questions or need clarification, please ask.
Thank you.
ATR

How can i burn to disc lion os x?

how can i burn to disc lion os x?

Depends on what you want to burn. You can use Disk Utility (located at Applictions > Utilities) or use 3rd-party software like Burn (http://burn-osx.sourceforge.net/)

How can i burn a slideshow to a dvd disc and keep the same full screen hi-def quality to it? I exported it to idvd but much of the quality was lost.

how can i burn a slideshow to a dvd disc and keep the same full screen hi-def quality to it? I exported it to idvd but much of the quality was lost.

Ask in the iDVD forum on what's the best way out of iPhoto and into iDVD. The resident expert there, Bengt Wärleby, can give you the best option.
OT

How can I burn a dvd with a short movie file on my Imac so it will play on a dvd player? I keep getting an error message on my player "wrong disc type".

How can I burn a small movie file to a dvd that will play on a dvd player? I keep getting an error message "wrong type of disc" on my player. My burner is built in to my monitor. Will I have to buy software such as Toast to burn with?

I'm using the burner utility that came with the computer. The video is on I took with my small camera. I'm using a DVD-r disc and I drag the file to the disc icon then hit burn and everything seems ok. I can remove the disc and put it back in and see the file but if I put it in a DVD player it won't play, just get error message.

How do you burn photos to a disc so that the titles are shown and they can be used in windows?

How do you burn photos to a disc so that the titles are shown and they can be used in windows?
do

Are they in iPhoto?
Select the pics in the iPhoto Window and use the File -> Export command. In the resulting window, at File Name, select 'Use Title'. Also check the boxes at Title and Keywords, and they will be written to the IPTC metdata of the files. Complete the export to a folder on the desktop and iPhoto will export the photos using the Title as a Filename. Burn that folder with the Finder.
Regards
TD

How can I burn audible book to disc with chapters?

Similar Messages

Maybe you are looking for