How can I capture Skype audio on a separate channel

I do interviews via skype. I currently use an external mic and USB mixing board and record with Audition CS6. But I want to record the caller's audio on a separate channel. How can I do that? Seems like there should be a way.

Back in the mists of time I did a document about this. It refers to earlier versions of Audition, but that doesn't matter because this is controlled externally from it anyway. It's not the most brilliant document in the world (the diagram is hand-drawn), but you should be able to figure out the basics:
Recording Skype calls with Audition

Similar Messages

  • How can I acquire the data from 3 separate Channels of SCXI1300 simultaneously?

    I am trying to build a DAQ system, which can collect the data coming from 3 different channels. I am using the SCXI 1300 board, Labview 8.0. I used 3 separate DAQ Assistant module to build the system, but it can not collect the data from the 3 channels simultaneously, it can only collect the data from one channel by another channel. So I am wondering how could I fix this problem or rebuild my system.  Thanks

    Hi, Dennis
    I tried to use the NI-DAQmx to replace the DAQ Assistant to do the 3-channel data acquisition simultaneously, and I did the signal splition as you told me. The program works fine for 1-channel data collection, but if I chose 3 channels to do the data acquisition simultaneously, the program could not wokr, and  a warning window  kept poping up, and the window tells me the maximum sampling frequency is 0.952. So I am wondering what is going wrong and how to fix it.
    The attached files are the code and the screen shot of the warning window, please check them.
    Thanks
    Jingrui
    Attachments:
    NI-DAQmx program.vi ‏165 KB
    Warning Window.jpg ‏2305 KB

  • DAQCard 1200: How can I send two TTL singals on separate channels with adjustable delay shortly after (typically a few milliseconds) external triggering?

    Hi, this is probably a simple question, but I have never used the digital and timing part of any DAQboard before... I wish to use an old Power Macintosh 7200 with a DAQCard 1200 for timing and synchronizing external events . The scenario is as follows; an external device (in my case; a CCD camera) sends a trigger signal (TTL, 600 ns). I want this signal to trigger the DAQCard, whereafter I want the DAQCard to send two TTL pulses (20 microsecond duration) from two separate channels (one pulse from each channel). The first pulse must be sent within a few milliseconds after the trigger is recieved. Th
    en I wish to be able to control the delay from the first pulse is sent and to the second pulse. This delay should preferably be adjustable from a few microseconds and up to at least 20 milliseconds. How can I achieve that kind of operation? (I need a few tips to get started.. like for instance: should I connect the external trigger signal to the EXTTRIG pin or to the gate pin of one of the counters? Do I have to interconnect the counters in some way? Do I have to invert the OUT signals? etc..)Thanks for your help in advance.
    regards,
    Michal

    I have not personally used the DAQCard 1200, but if it is similar to the E-series devices, you route the trigger signal to the gates of both counters.
    In your code, use the Data Acquisition->Counter->Generate Delayed Pulse VI twice, once for each counter. You can then set an input on that VI to select to trigger on the gate, and set the delay and pulse width of the pulse. Since both will start from the same trigger, you can delay either pulse as long as you wish, from microsecond to seconds, making the second pulse follow the first.
    Mark

  • In v.11, how can I capture video but not audio from a camera?

    In v.11, how can I capture video but not audio from a camera?

    Rodney
    I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
    If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
    1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
    a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
    or
    b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
    Publish+Share/Computer/AVI with Presets = DV NTSC Standard
    Please let us know if any of that worked for you.
    Thank you.
    ATR

  • How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

    How can I convert an AUDIO  MPEG-4 to another type of file, such as MPEG3  or mp3

    Use Handbrake.
    You can download it for free from this site:
    http://www.macupdate.com/info.php/id/12987/handbrake
    Good luck

  • How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    Tom Wolsky wrote:
    The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
    You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
    Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
    I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

  • How can I remove Skype from my iMac?

    How can i remove Skype from my iMac?
    Thanks

    https://support.skype.com/en/faq/FA12073/how-can-i-completely-uninstall-and-then -reinstall-skype-for-mac-os-x?frompage=search&q=uninstall+skype+mac&fromSearchFi rstPage=false
    That should assist with getting rid of skype, Just don't worry about the reinstalling part

  • I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.

    Use DropBox. https://www.dropbox.com/help/84/en
     Cheers, Tom

  • How can I delete Skype SMS messages from my I-Pad?

    How can I delete Skype SMS messages from my I-Pad?

    This is a user-to-user forum. Everyone here is a volunteer. Sometimes it takes longer than two minutes to get answer. Additionally, it's a support forum for Apple products, not Skype. You might get lucky and get an answer, you might not. While you're waiting, why don't you try Skype support?
    https://support.skype.com/en/

  • How can I record an audio sound and convert it to a ringtone?

    How can I record an audio sound and convert it to a ringtone?

    Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
    In iTunes the recorded voice is listed under Music as some_numbers.m4a.
    Right click on the item and choose Create AAC version.
    Drag the converted voice onto the desktop.
    Delete the voice copy in iTunes. (important step)
    On desktop, rename the some_number.m4a to something_more_intelligent.m4r
    Drag it back to iTunes and you will find it under Tones.
    Now select it (for sync) and connect your iPhone, do a sync.
    If everything works out, it will be in Settings > Sounds > Ringtone.
    Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
    Hope this helps.

  • How can I add an audio file to each slide when I export to HTML Keynote 6.2

    How can I add an audio file to each slide when I export to HTML Keynote 6.2
    I am trying to create an audio slide show instead of a movie

    Drag and drop one music files onto each slide then export. (File > Export > HTML)

  • How can I delete SKYPE to GO - my account has been...

    How can I delete SKYPE to GO???? My account has been hacked and a SKYPE to Go account has been set up with I number I am unable to delete. It has proved impossible to contact anyone at SKYPE to inform them of this and to ask for assistance in deleting the account. My credit card has already been debited for calls I have not made. I am just beginning to realise that SKYPE has very little interest in the security of its customers account.  I would be really grateful for any help the SKYPE community can give me to delete this SKYPE to GO account. If anyone has contact details for SKYPE that would be much appreciated. Many thanks

    Hi, Hannah84000, and welcome to the Community,
    Please keep trying to contact Skype Customer Service.  I have read that people are experiencing problems reaching them, however try using a different browser, and be on the alert to accept a pop-up dialogue box window that would appear if you are directed to start an instant message chat with a customer service agent.
    People are getting through; sometimes is takes more than one or two attempts.  Skype is aware of this.
    Kind regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How can I get my audio book back on my ipad?

    How can I get my audio book back on my ipad?
    After syncing with itunes on the pc, my newly purchased audio books vanished from the ipad, and I can't copy it back! I've tried copying the audio book back into the library, but that didn't help.
    Also couldn't get iTunes on my iCloud! there was no where to select on the icloud dashboard so that I can add iTunes ... Help!

    Audiobooks are not currently available for repeat download from iTunes in the Cloud. Your audiobook should have transferred to your iTunes library when you synced your device.
    You will need to contact support through the "Report a problem" links in your account history, or via Contact Support.
    tt2

  • How can I capture an externally hosted page as a variable ?

    How can I capture the html or css of an externally hosted
    page and use it as a local variable ? There's plenty of options for
    doing it with local file but I can't work out how to go about it
    when the file isn't on your cf server. Any ideas ?

    Yes, of course.
    {insert the sound of slapping oneself in the head here}

  • How can i quick edit Audio( increase bass) of a single file?

    Hi everyone,
    Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
    THanks

    ok.
    "Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
    1) How do i copy the attributes after making the changes??
    2) How do i paste the attributes onto the next file?
    Thanks.
    Re: How can i quick edit Audio( increase bass) of a single file? 

Maybe you are looking for