How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

Similar Messages

  • On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

    On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

    You can set the default duration of stills but you have to do it before you start the project. 
    iMovie is not really suitable for stop motion videos and iMovie 10 is worse than iMovie 9 because the minimum still duration is not really controllable as you have found.   I don't have experience of making such videos but there are 3rd party apps which appear more suited to this, for example http://www.macworld.com/article/1146623/stop_motion_Mac.html
    mentions some of them, though its a bit old and you may be able to find more up to date information.
    Geoff.

  • How do I change the duration of all clips/ photos to under 00:00:03?

    I am making a movie from images that were rendered with Maya, a 3D software.
    When I import lets say 50 images , they all come in with a duration of 5 seconds each .
    I figured out how to slow down their duration to 00:00:03
    but I want them all to be 00:00:01, meaning, 1 frame per image, 30 images a second.
    imovieHD only allowed me to reduce the photo to have a duration of 3 frames , no less!
    How do I reduce the duration of all my photos to 1 frame or a 30th of a second?
    Please help!

    you posted in the iMHD section of this board.. which is vers. 5 (five).. you're using vers5 with 10.5. ?
    in iMHD(5), project has to be DV or any other, but not iSight/mpeg4..
    import one pic into timeline, uncheck KB, doubleclick the clip and set its duration to 00:00:00:01 .. following imports adopt these settings
    in iM08/09 (I assume, that is your version...) 3 frames is shortest.
    you need other apps to accomplish your task, QTpro, FramebyFrame, iStopmotion etc ..

  • How can I change view options for ALL playlists?

    How can I change view options for ALL playlists? With one single click or trick?
    I have a lot playlists and don't want to change every single one of them separatly.
    Thanks for your help. (I use Windows 7)

    There's no FAST way I know of, which is what I think you mean.
    Only the painful SLOW way of one-by-one.
    You could make a new playlist from the main library after you've set the columns up as you like.
    Go to an existing playlist that doesn't have the columns you want, and select all.
    RIght-click > Add to Playlist and send them to the new playlist.
    That's still one-by-one and only works with static playlists, not smart ones.

  • How can I change the settings of all instances of a particular effect?

    I've applied the same color correction effect to a lot of clips in the timeline. Now I want to fine tune the color correction (same setting for all clips still). How can I change the setting of all instances of the color correction effect without going into each clip manually?
    Looking forward to your thoughts on this!! Go on and save my cold winter editing day ...

    I was first hoping for File> New > Adjustment layer, but it's always greyed out. I thought that would create an adjustment layer, maybe I'm misunderstanding something? Anyway, if I create a black video stump and then right click it and choose "Adjustment layer", it will turn into one, and everything works as it should with that. If the black video become adjustment layer is placed on a video track atop my video, and I add for example color correction to it, it will be applied to the videos below.

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • How can i change the font for a theme in iDVD.

    how can i change the font for a theme in iDVD. For example; the text of the rotation theme in the background of the movie. i want to change the font of the rotating text there. How do i do this?

    Have a look at this: http://hints.macworld.com/article.php?story=20080130180258257

  • How can I change the settings for being timed out (I don't want to be timed out ever)

    How can I change the settings for being timed out (I don't want to be timed out ever)?

    I am sorry but this isn't something that you can set. The system has timeouts built into the code.
    Andrew

  • How Can I change the Authentication for this Dynpage

    Hello ,
    I have created a rss feed in special Dnypage.   When I try to connect with rss reader  to dynpage it occurs an error 500.  The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
    How Can I change the Authentication for this Dynpage ? I need a LogonScreen
    RSS URL:
    /irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

    Hi ,
    sry the entry in xml does not help. No Logon Prompt
    <?xml version="1.0" encoding="UTF-8"?>
    <application>
      <application-config>
        <property name="SecurityArea" value="NetWeaver.Portal"/>
        <property name="Vendor" value="xx.com"/>
        <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
      </application-config>
      <components>
        <component name="uwlquickstarter">
          <component-config>
              <property name="SafetyLevel" value="no_safety"/>
            <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>   
          </component-config>
              <component-profile>
                   <property name="AuthScheme" value="default"/>
              </component-profile>
        </component>
      </components>
      <services/>
    </application>

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • How can i change the ringtone for different contacts.  "edit contacts" won't let me`??

    how can i change the ringtones for different contacts on the razor.  "edit contacts" wont allow me to

    Here is the Instructions your Looking For:  Down towards the Bottom of the Instructions shows how to set Ringtones for each Contact.
    How do I download and use ringtones on my DROID  Razr & RAZR MAXX?
    Quick links
    Set any of your songs on your SDcard as a phone ringtone
    Choose Phone ringtones through settings menu
    Customize the text message ringtone
    Assign a ringtone to a specific contact
    Download ringtones from Play Store      
    1. Set any of your songs on your SDcard as a phone ringtone:
    Touch Apps > My music
    While the music is playing, touch the phone Menu Key > More > Use as ringtone 
    The ringtone is set as your default incoming call ringtone and copied to your Phone ringtone list.       
    Note: The above instructions are for the My music player and not for other players such as Play music.      2. Choose Phone ringtones through settings menu:
    Press the Menu key
    Touch Settings
    Touch Sound
    Touch Phone ringtone  (If option is greyed out, make sure handset volume is not set to Silent Mode)
    Select a Phone ringtone from the list. Press OK to set. (Music files you have set as Incoming Call ringtone from your SDcard will be included in this list along with downloaded and preloaded ringtones.
    3. Customize the text message ringtone
    From the homescreen or from within the applications tray, touch Text messaging
    Press the Menu key (On the left with 4 squares)
    Touch Messaging Settings
    Touch Select ringtones (if option is greyed out, make sure Notifications is turned on / actived)
    Touch on any Notification ringtone to select and hear a sample.
    Press OK to set as notification ringtone
    CLICK HERE for instructions on creating your own custom ringtone for Text Messages
    4. Assign a ringtone to a specific contact:
    Press Contacts icon on homescreen or tap on Contacts application from the Applications Tray
    Touch and select the specific contact
    Press the menu key
    Touch Options
    Touch V (down)  icon next to Ringtone
    Choose a Phone ringtone from the list and tap OK to set.
    Note: To assign a music/song from your memory card as a ringtone, first follow step1 above and follow step 4 again. 5. Download ringtones from the Play Store
    From the applications menu, touch Play Store
    Touch search  to search for ringtones.
    Answers others found helpful
    How do I setup and use Bluetooth on my DROID RAZR MAXX?
    How do I transfer files to/from my DROID RAZR MAXX?
    How do I set up and use the Smart Actions application using the DROID RAZR MAXX?
    How do I use the DROID RAZR MAXX for video chat?
    How do I force my DROID RAZR MAXX to reboot or restart?

  • How can i change the phonenumber for my security code in keychain on ios 7.03

    how can i change the phonenumber for my security code in keychain on ios 7.03?

    i have changed the phonenumber under icloud preferences keychain. after the update on ios 7.03 there is no sms arriving for the security code because there is a double international code in the telephone number like +49 +49. How can i fix this?

  • How can i change the paasword for my backup?

    how can i change the password for my backup?

    Actually what I'm looking for to backup my data but unfrotunetely I can't because always asked me for the correct pasword to allowed to restore my data. thx Libby 101a

Maybe you are looking for

  • Moving Photos to a new folder in Lightroom 1.3.1 using Mac OS 10.5.1 Doesn't Work

    I use an iMac with OS 10.5.1 and Lightroom 1.3.1. First, I successfully imported the photos from my Epson P-2000 to a folder (Germany) which I created as part of the import into Lightroom (for File Handling in the Import dialog I used Copy Photos to

  • Report for operation confirmations

    Hi Product A . production order qty is 100. It has 4 operations.10,20,30,40. for operation 10     confirmed qty 100        operation 20     confirmed qty 80      operation 30      confirmed qty   85                      40              100  I want a

  • Acrobat 9.0 version installation / download

    How can I install / download an older Acrobat 9.0 version I had purchased on my new computer?

  • Need pdf file links for different scenarios

    Hi folks, I am new to PI.Please can any body provide me pdf file links for different scenarios like   File to File, File to JDBC,JDBC to File,File to RFC, RFC to File, File to IDOC, IDOC to File, Http to RFC, Web services to RFC, File to Mail,ABAP to

  • Officejet 7410 Always Printing in Best Mode

    Bob, I am in desperate need of some help. I run Vista os. Just the other day my printer - hp 7410xi All in One started printing in "Best" quality all the time regardless if I have "Fast Draft" selected. I have uninstalled everything and reinstalled i