How can I change the state of a runtime menu item programatically?

Using LabView 6.1, I would like to change the state of the runtime menu item "Operate/Print at completion".
The goal here is to print the VI front panel according to the operator choice (OK ->print, Cancel ->don't print)
In a first release, I put a Stop function at the dialog output (activated by the cancel button) but this function stop the complete application and my idea where to stop only the VI in which the dialog is running.
In a second release, I've tried to use the "Application
control/Menu" but I receive every time an error:
Error 88 occured at Cannot modify application menu item in the printtest.vi.
Possible reasons: LabView, Runtime menu error...
Any suggestion is appreciated.
Re
gards,
phidu

Instead of using the print at completion option, print the VI programatically if the user selects to print...open a reference to the VI you want to print and use an invoke node to print vi to printer.
Alternatively create another VI with a layout optimized for printout, set it to print at completion and run and load the data into that VI if and only if the user OKs the print...
Mads
MTO

Similar Messages

How can I change the state in the shipment info in the account setting?

How can I change the state in the shipment info in the account setting?
I was trying to buy an Apple TV from the store but, I live in Italy and at the moment (for long time) I'm in Deutschland.
From the shipment information i didn't find the possibility to change the state. From default is ITALY but I need to receive in Deutschland.
Did somebody know how to???
Thanks in advance!!!

Hi 7oaksGaz,
1) Due to tax reasons, it's not possible to change the country associated with an existing Adobe ID.
Follow the steps mentioned in the below link as a workaround to create an Adobe ID with the email address you currently use for the existing Adobe ID.
http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
2) You can change the language of the application from AAM preferences
Please find the link below for the article with the steps
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
Thanks!
Eshant

How can I change the state for normal. All I get is a question mark.

I can't change the normal state for my site. The button for color of text for the normal state is a question mark. Is there a way to reset this?

Thanks. I am trying to change the appearance of a hyperlink on a web page. Specifically, I want to change the default text color from blue to another color. I can change the color for the other states of the hyperlink (rollover, etc.) but the attempt to change the normal state of the hyperlink is unsuccessful because the color box for that state is a question mark. Bill

How can we change the state of records in view cache and entity cache

Hi everybody,
I am trying to achieve selective rollback, or selective commit. By this I mean that I am looking for a way to change the state of rows in view cache, so that the selective changed rows can be rolled back during comit.
if anyone has tried anything in this please help me.

I agree!
I can't top this approach.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I change the background color of a menu ring?

Hi
Does anybody know how to change the background color of a menu ring??? (not the backround color of the first item, the background color of the list (remains always gray))
thanks martin

Try Preferences>>Colors>>Menu Background, but this will change ALL menu's background color.
Hope this helps

How can I change the SocketFactory at runtime?

I have a question, maybe someone has had a similar problem. I have a client-server application with communication over RMI. The client may, through a dialog box, choose a connection "submethod":
* a simple RMI
* RMI over fixed ports
* RMI over HTTP.
After selection the application registers the proper socket factory with the RMISocketFactory.setSocketFactory(...) method. So, if the user disconnects from the server and tries to reconnect with another "submethod", the application throws the following exception:
java.net.SocketException: factory already definedAPI says "The RMI socket factory can only be set once", so how can I change the connection submethod at runtime?
Regards,
Marek.

You can't.

How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)

Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
3° Ive created buttons linking pages..
- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'
- what should i do?
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.

stlbbl4u wrote:
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
You should setup Object Styles - these can also include Paragarph Styles that can be triggered when the Style is selected.
http://help.adobe.com/en_US/indesign/cs/using/WS5CEDB81A-0011-4dc9-9DE8-AC7AD4C80076a.html
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
I'm not sure what you mean - I don't do files with Animations
3° Ive created buttons linking pages..- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
Does it work properly when you export it to the finished file?
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'- what should i do?
InDesign won't link directly to youtube videos. I think your best bet would be to use Downloader to download the video and embed them directly in Indesign.
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.
You can look up how to embed a SWF file into your HTML - but it depends what you mean by "online" there's a dozen ways to get a file "online".

How can I change the tag name in cursor statement?

Hi
I have two tables: TableA and TableB. I want generate a XML file using XSU12 from these two tables, the XML structure like:
<ROWSETA>
<ROWA num="1">
<A1></A1>
<A2></A2>
<A3>
<A3_ROW num="1">
<B1></B1>
<B2></B2>
</A3_ROW>
<A3_ROW num="2">
<B1></B1>
<B2></B2>
</A3_ROW>
</A3>
</ROWA>
</ROWSETA>
How can I change the tag name and attribute for "A3_ROW"?
Thanks in advance!
null

In short, you can't.
You can use the column alias as you're already doing to change the name of the "A3" part of "A3_ROW" but you cannot change the "_ROW" part of "A3_ROW". This is added automatically.
You can combine the results of XSU with an XSLT stylesheet (made very simple if you're using XSU by working with Oracle XSQL Pages) to change the name of any element or completely restructure the XML output into a target XML, HTML, or text format.

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
 [super viewDidLoad];
 This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
 self.tableView.allowsMultipleSelectionDuringEditing = YES;
 // populate the data array with some example objects
 self.dataArray = [NSMutableArray new];
 NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
 for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
 NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
 [self.dataArray addObject:itemName];
 // make our view consistent
 [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
 return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
 // Update the delete button's title based on how many items are selected.
 [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
 // Configure a cell to show the corresponding string from the array.
 static NSString *kCellID = @"cellID";
 UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
 cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
 return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
 [self.tableView setEditing:YES animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
 // The user tapped one of the OK/Cancel buttons.
 if (buttonIndex == 0)
 // Delete what the user selected.
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL deleteSpecificRows = selectedRows.count > 0;
 if (deleteSpecificRows)
 // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
 NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
 for (NSIndexPath *selectionIndex in selectedRows)
 [indicesOfItemsToDelete addIndex:selectionIndex.row];
 // Delete the objects from our data model.
 [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
 // Tell the tableView that we deleted the objects
 [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
 else
 // Delete everything, delete the objects from our data model.
 [self.dataArray removeAllObjects];
 // Tell the tableView that we deleted the objects.
 // Because we are deleting all the rows, just reload the current table section
 [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
 // Exit editing mode after the deletion.
 [self.tableView setEditing:NO animated:YES];
 [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
 // Open a dialog with just an OK button.
 NSString *actionTitle;
 if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
 actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
 else
 actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
 NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
 NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
 UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
 delegate:self
 cancelButtonTitle:cancelTitle
 destructiveButtonTitle:okTitle
 otherButtonTitles:nil];
 actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
 // Show from our table view (pops up in the middle of the table).
 [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
 [self.dataArray addObject:@"New Movie"];
 // Tell the tableView about the item that was added.
 NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
 [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
 withRowAnimation:UITableViewRowAnimationAutomatic];
 // Tell the tableView we have finished adding or removing items.
 [self.tableView endUpdates];
 // Scroll the tableView so the new item is visible
 [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
 atScrollPosition:UITableViewScrollPositionBottom
 animated:YES];
 // Update the buttons if we need to.
 [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
 if (self.tableView.editing)
 // Show the option to cancel the edit.
 self.navigationItem.rightBarButtonItem = self.cancelButton;
 [self updateDeleteButtonTitle];
 // Show the delete button.
 self.navigationItem.leftBarButtonItem = self.deleteButton;
 else
 // Not in editing mode.
 self.navigationItem.leftBarButtonItem = self.addButton;
 // Show the edit button, but disable the edit button if there's nothing to edit.
 if (self.dataArray.count > 0)
 self.editButton.enabled = YES;
 else
 self.editButton.enabled = NO;
 self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
 // Update the delete button's title, based on how many items are selected
 NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
 BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
 BOOL noItemsAreSelected = selectedRows.count == 0;
 if (allItemsAreSelected || noItemsAreSelected)
 self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
 else
 NSString *titleFormatString =
 NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
 self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

How can I change a State name in iphoto map?

A few months ago, changing a location of a group of photos, I really changed a state name.
The image shows the name State "Casa David i Mireia" where should say "Catalunya" that is the real name.
How can I change that name. I have opened a case in Apple Support, but the solution to reinstal the app have not worked for me.
Thank you for your help
Jordi

Thanks for your help!
The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
I don't if this post is comprehensive. I'm not sure.
Thanks for your time!
Jordi

How can I change the date format in Reminders and in Notes?

How can I change the date format in both Notes and Reminders? Preference on Imac and Settings in IOS do not allow me to change the format in those 2 apps.
I Like to see 10oct rather than 10/10, as an example.

pierre
I do not have Mavericks or iOS - but the first thing I would do is reset the defaults - I'll use Mavericks as an example
From If the wrong date or time is displayed in some apps on your Mac - Apple Support
OS X Yosemite and Mavericks
    Open System Preferences.
    From the View menu, choose Language & Region.
    Click the Advanced button.
    Click the Dates tab.
    Click the Restore Defaults button.
    Click the Times tab.
    Click the Restore Defaults button.
    Click OK.
    Quit the app where you were seeing incorrect dates or times displayed.
    Open the app again, and verify that the dates and times are now displayed correctly.
Then customize to taste - OS X Mavericks: Customize formats to display dates, times, and more
OS X Mavericks: Customize formats to display dates, times, and more
Change the language and formats used to display dates, times, numbers, and currencies in Finder windows, Mail, and other apps. For example, if the region for your Mac is set to United States, but the format language is set to French, then dates in Finder windows and email messages appear in French.
    Choose Apple menu > System Preferences, then click Language & Region.
    Choose a geographic region from the Region pop-up menu, to use the region’s date, time, number, and currency formats.
    To customize the formats or change the language used to display them, click Advanced, then set options.
    In the General pane, you can choose the language to use for showing dates, times, and numbers, and set formats for numbers, currency, and measurements.
    In the Dates and Times panes, you can type in the Short, Medium, Long, and Full fields, and rearrange or delete elements. You can also drag new elements, such as Quarter or Milliseconds, into the fields.
    When you’re done customizing formats, click OK.
    The region name in Language & Region preferences now includes “Custom” to indicate you customized formats.
To undo all of your changes for a region, choose the region again from the Region pop-up menu. To undo your changes only to advanced options, click Advanced, click the pane where you want to undo your changes, then click Restore Defaults.
To change how time is shown in the menu bar, select the “Time format” checkbox in Language & Region preferences, or select the option in Date & Time preferences.
Here's the result AppleScript i use to grab the " 'Short Date' ' + ' 'Short Time' " to paste into download filenames - works good until I try to post it here - the colon " : " is a no-no but is fine in the Finder
Looks like iOS Settings are a bit less robust
- Date/Time formats are displayed according to 'tradition' of your region > http://help.apple.com/ipad/8/#/iPad245ed123
buenos tardes
ÇÇÇ

How do I change the states of the "Submit" button in adobe muse?

How do I change the states of the "Submit" button in adobe muse? Currently I can only change the color, text and stroke of the button, but I cannot customize it as I have the other buttons in the tool.

I want to replace the button with an image, however it does not permit me to paste an image into the button, nor does it allow me to delete the box that is currently there. The best I can do is paste the image into the text box that is provided.

How can i change the color of a blinking button?

Dear all,
how can i change the color of a blinking button with property nodes, when the button changes from "normal" state to blinking state? I can change the color of the normal state, but how can I change the color when the button is in blinking state?
thanks

jus an example
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
Blinking_Indicator_2003.vi ‏27 KB

How can I change the ICloud/ID Apple on my Ipad/IPhone?

I've changed my Apple ID and I've changed the ID of Itunes on my IPad/IPhone.
Now I want to change the IPad/IPhone ID on ICloud, but my IPad keep and store on my previous ID. How can I change the ICloud ID Apple on my Ipad/IPhone?

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I change the state of a runtime menu item programati​cally?

Similar Messages

Maybe you are looking for

How can I change the state of a runtime menu item programatically?