How can I change the text layers to a specific color at the same time and in the fast way?

Dear all!
I am using Photoshop CS5. I typed 65 text layers in my file and wish to change their colors to a specific Black Color, but I don't know how to select all the layers at the same time so that I can change all the text layers from Red Color to Black Color in the fast way. Now I only select one layer and then change. It means I must select and change 65 times for the text layers. Hope you can understand what I mean.
Thanks a lot.
My Kindest Regards,
LUCK

One way is to select all the text layers, select the type tool in the tool box
and set the color from the tool options bar.
MTSTUNER

Similar Messages

How can i change alert text size?

hello everyone
how can i change alert text size?
thanks

What about using the properties of the alert, there are several settings for the font (also one for the size)

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

Can I change my podcast subscription to only put a new episode as visible and in the cloud, but not actually download it?

Can I change my podcast subscription to only put a new episode as visible and in the cloud, but not actually download it?

The person who holds the copyright to it in the UK hasn’t given Apple permission to sell it there; if desired, click here and fill out the form.
(116905)

How do I remove the application from your iPad at the same time and with the clouds?

Hello,
how can I remove the application from your iPad at the same time and with the clouds?
I know you press the app icon until it starts shaking, then press the black cross in the upper left corner. This will remove it.
But still I will come in to the store as a bookmark Purchated I see it with the symbol of a cloud. And I would like to remove it for good. Under iOS 5.1.1 somehow I managed to do that (at least hide it). In iOS 6 I can not do that.
I greet

The only transition you can add this way is default cross dissolve. If the images are in the timeline, move the playhead to the beginning of the images, select them all, and drag from the timeline to the canvas to overwrite with transition.

How can I change selection texts of standard report (S_P99_41000192)?

Hi:
I want to change selection texts of tcode s_P99_41000192.
( Our SAP verison is SAP 4.7 version, non unicode)
Because we can see only Deutch.
It looks standard sap query so we can not add it into package.
How can we change it?
Please help me.

Hi,
you can change this in the related InfoSet /SAPQUERY/AM27 on which the Query is based on. Tcode InfoSet maintenance is SQ02.
Regards,
Markus

How can you change your security questions!! i got a new iphone 5 and i forgot them!!

How can you change your security questions?! I got the iphone 5 and i forgot them and it wont let me buy songs!!!!

Click here and request assistance.
(72909)

***Resubmitted for further review*** How can I do position maintenance using a digital input to capture an encoder count and adjust the move profile on the fly.

I have a rotary table (45:1 ratio) being driven by a stepper motor with an encoder attached to the motor. I am using a 7344 motion controller. I want to be able to do position maintenance on the move. The problem is that I am always moving in the same direction and the table has mechanical error. I have a home input on the table, which I have wired to the trigger input for the corrosponding axis. My thoughts were to capture the position when the table goes by the home input and compare it with the previous time and make the adjustment in the next move. I am just not sure what the best way to do this
is.

Hello,
So when you say that the table has mechanical error you mean that the number of steps per table revolution will vary from revolution to revolution? I apologize that I misunderstood this initially. What you could do is use high speed capture to read the position of the stepper every time the home switch (or some other mechanical switch) is hit for each revolution of travel. Then when the high speed capture lined is toggled you can read the current position and modify your next move accordingly. To get details about High Speed Capture please search for High Speed Capture from our Developers Zone at: zone.ni.com
There are examples programs on our website and examples available with the FlexMotion driver.
Please let me know if you have any further questions.
Re
gards,
Andy Bell
Application Engineer
National Instruments

How can I do position maintenance using a digital input to capture an encoder count and adjust the move profile on the fly.

I have a rotary table (45:1 ratio) being driven by a stepper motor. I am using a 7344 motion controller. I want to be able to do position maintenance on the move. I have a home input on the table. My thoughts were to capture the position when the table goes by the home input and compare it with the previous time and make the adjustment in the next move. I am just not sure what the best way to do this is. I am thinking that I want to tie the home input to one of the trigger inputs as well as the home.

Hello,
Your best option will be to use an encoder for feedback in your system. If you use an encoder then at the end of the move, the controller will compare your trajectory position with the position the encoder reads (the actual position) and make the necessary adjustments. Also, this is all handled transparently so you won't have to worry about any complicated programming issues.
Regards,
Andy Bell
Applications Engineer
National Instruments

How can i change a text on the frontpanel?

Hello,
i have a cluster which looks like the attached cluster but with more and smaller quadrants.
Now i want to add a text above each column. This can be done with a description. But now i want to load the description dynamically from somewhere (file, global) so that it must be changeable. But it seems not to be possible to change the text of a decoration.
What other possibilities are there to add a text above the cluster? I tried to to it with a text-array but there i cant make the text be shown like in the description (counterclockwise).
Thx for any ideas.
Attachments:
text.vi ‏10 KB

Hi OnlyOne,
you can get acces to them using the property node, but you can´t change the value. You can use boolean controls to do it.
Mike
Attachments:
text_LV80.vi ‏16 KB

There are marker elements in my FM file,How can I change their text information?

In my Fm file,I want to change the text information of marker,How can I deal with it?

Jack:
Begin by selecting the marker. If you haven't already done so, use View --> Text Symbols to allow you to see the markers.
You can then use your mouse or keyboard to select the marker manually or use
CTRL+f to open the Find/Change tool, in the
Find list choose
Marker of Type and specify the type of marker (or choose
Any Marker if you don't the marker type), then click
Find.
After a marker has been selected, press in sequence
ESC s m to open the
Marker tool, edit the marker text, then click
Edit Marker.
Cheers & hope this helps,
Riley

How can i change bookmarks text colors, not toolbar text color.

I know how to change color of toolbar text but still want to change the text color of bookmarks.

You can experiment with code like this in the userChrome.css file.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks .bookmark-item > .toolbarbutton-text {color:#000!important; background-color:-moz-dialog!important}
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

HT5621 how can I change my apple id email without accessing my email account as I have forgotten the password?

I have forgotten the password to my email account and would like to change the email of my apple id to a new one.

Sign out of your Apple ID on all your services & devices, especially iCloud on your iPhone.
Go to id.apple.com.
Log in with your Apple ID & password.
Then, edit your primary email address to the new email account.
Once you do so, a verification email will be sent to the new email address.
Go to your email account and verify the new primary email address.
Apple ID: Changing your Apple ID

How can I find a text box with a specific word in it ?

Hi,
I have hundreds of settlement names on a map created with the text tool. How can I search on the name of one of them and find it on my map ?
I am with FH9 but the method would no doubt be backwards compatible from MX. If it isnt I would launch MX just for this exercise.
Would this also work if the word was part of a text box text ?
I have the luxury of it being the entire text box !
Cheers
Envirographics

If you have one large text box to search for the word, select it, then go to EDIT>FIND & REPLACE>TEXT...
Type in your word and click FIND NEXT button. If you have multiple occurances of the name, keep clicking the FIND NEXT button until the word hilites.
If you have scattered text boxes on your map, don't select any of them but still go through the EDIT>FIND & REPLACE>TEXT... routine I mentioned. FreeHand will look through all text boxes to find your word.
Oh yeah, this works the same in FreeHand 8 thru FHMX.

HT1386 How can I get local content only to sync FROM my library to my Iphone and not the other way around?

Ever since ICloud, my local Itunes library has been poluted with old music that I got rid of a long time ago.
I purchased an album from the Itunes Store App on my Iphone, listened to all the songs and decided I don't like all of them but some of them. So I went on my laptop and the album I purchased loaded into Itunes. I manually deleted the content I didn't want from my Itunes library. Once my library was set the way I wanted, I wanted my Itunes library synced into my Iphone, but instead, my Iphone's content gets re-synced back into my Itunes library and the content I once deleted tries to re-download.
It's agrivating that what was once an easy automated process is now a slow agonzing manual process. I'm considering getting rid of my phone if I can't find a remedy for this, which is the only apple product I now own.
I don't want ICloud to auto download content
I don't mind streaming the old music on my Iphone but I DO NOT want it downloaded into my phone or into my library. I like to keep ICloud and my Itunes Library seperate.
I just want to click "Sync" on Itunes, and my phone syncs EXACTLY how my Itunes library is.
Please help...

Backup, then restore the iPhone without syncing. Only the content currently in your library can be restored back to it.
Turn off all options in iTunes and on the device for automatic downloading of purchases.
In principle purchases made on the device are copied into the iTunes library when syncing. This ensures that you have the media ready to place back on it or a replacement should the device be lost, stolen, damaged, or need restoring, When you want to remove content either delete it manually from both the device & the library at the same time, or uncheck it within the library so that it is removed from the device during sync, then remove from the library later.
tt2

How can I change the text layers to a specific color at the same time and in the fast way?

Similar Messages

Maybe you are looking for