How can I combine two databases, from two computers, to have one combined database of messages?

My old XP computer recently died and I had to build a new Windows 8.1 machine. While I was down I used a laptop as a temporary replacement. Now my new machine is running fine and receiving e-mail, but I now have two databases--one on the new machine and one on the laptop. Both are based on a recent backup, so they are lengthy--except that the new machine's database has a hole in it for the period I was on the laptop and the laptop's database also has gaps. How can I combine two databases into one that includes the messages from both machines?
Thanks in advance,
profsimonie

Thanks for your reply. My profile folder did not contain any MBOX files. I found them in another folder on another drive. The Import-Export tools simply transferred each folder to the current one as a sub-folder. Then I had to use ctrl-a to select everything in the folder and move them manually to the current folder (such as inbox). Then I could use the other utility you mentioned to remove the duplicates. This had to be done, one folder at a time, to combine each folder. It worked, but I had about thirty-five folders to deal with. The whole process took most of two days to complete. I wish there was a simple way to blend everything together in one action, but I could not find an add-on that would do this.
Frank Simonie

Similar Messages

  • HT1420 How can I see a list of which computers I have authorized?

    How can I see a list of which computers I have authorized? 

    List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

  • How can I tell if signals from two devices are truly synchronised?

    Hi there,
    How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are?   I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
    I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware.  When I do this, the timestamps vary by up to 150ms which is larger than I expected.
    If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
    If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
    What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
    Thanks,
    Claire.

    Hi Lynn,
    Thanks for your help and for sending the demo.
    I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware.  They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this. 
    When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
    This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
    Thanks,
    Claire.
    Attachments:
    without trigger.txt ‏5 KB
    with trigger.txt ‏6 KB
    Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi ‏196 KB

  • How can you create a spoolfile from a program where have Error Message?

    I have a situation where I need a report to come out  - even if I have an Error or Abort Message.
    I need the report so that i can email the users in a second step of a Job.
    We want the CANELLED to show in the JOB queue but when that happens by doing a message with the error it does not output any spool file.
    The code is simple:
       CONCATENATE c_errors
                    c_error_645
            INTO  z_msg_line  SEPARATED BY space.
        WRITE z_msg_line TO z_output_line.
        WRITE:  z_output_line.
        lv_errors = 'X'.
        MESSAGE ID 'ZX' TYPE 'E' NUMBER '645'.
    The job stops, shows CANCELLED but not output to the spool file.
    If I change message type to I for imfomation I get the spoolfile but the JOB queue shows COMPLETED so a Basis person will not catch the Cancelled job.
    Thanks.

    Does the email processing have to occur within the same job?  Why not establish a polling process for cancelled jobs where you control the job name(s) to poll for and the linked users to email?  When you find a canceled job you can read the job log messages (assuming you have logged your errors using 'S' messages and then used a final 'E' message to stop the job) using function BP_JOBLOG_READ.  You could establish a spool from that (and attach it) or just embed the messages in the email body itself.
    I'm not sure what your scenario is though - I would separate application errors from technical errors in your error notification process, i.e., handle error notification/emailing within your programs themselves and avoid abending jobs if possible.  Are these Basis-handled errors or user-handled errors that you're talking about?
    Edited by: Brad Bohn on Aug 19, 2010 3:51 PM

  • How can i log off itunes from other computers???

    My itunes won't open because it says that I'm logged on, on another computer, is there any way I can log off of them from my computer?

    Do you mean logged on?
    Or Authorized?
    Just what are you trying to do?

  • How can I make a photo from two merged projects available for a book that I started using one project ? They merge but the book only allows me to access the original project photos even though the merged photos can be seen in the project ?

    I have successfully merged two projects in order to add new photos for my book.  The library available to the book which has 26 completed pages accesses only the original project library.  Has anyone else had this problem ?  It is frustrating to see the photos I want in the merged project file, but to have only the original photos when I started the book available in the book library.

    That will work, but it is the long way 'round.
    As Frank noted, Book Albums are just specialized Albums.  Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image.  You can put your Albums anywhere (in a Folder called "Books" for example).  You can put Images from anywhere in your Library in any Album.
    The easy way 'round:
    - Make a new Book Album
    - Select Images you may want to put in your Book.  Flag them.
    - Select some more.  Flag them.
    - Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
    - Repeat as needed, or just drag-and-drop directly into the Book Album.
    Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key.  This _does not remove the Image from the Project that contains it, or from the Library.
    Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication.  The Book Album contains the superset of Images with which you populate the Book itself.  The Book Album also holds the Book.
    A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
    The User Manual is helpful.  Here is
    the chapter on making Books. 
    From that chapter, here is
    the section detailing how to create and populate a Book Album.

  • How can I add old bookmarks from another computer to the ones I have on my new computer?

    My old computer crashed; and was replaced with a new one running Windows 7. I had saved my bookmarks, but couldn't find the thumb drive where they were saved, so began using Firefox on my new computer. Now I have bookmarks saved onto my new computer, but want to upload and merge my old bookmarks. I've only found a way to restore bookmarks that will complete wipe out the new ones. Short of writing down all the new ones and adding them back after restoring the old ones, is there any other way to merge the two?

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    * here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    * here explain how to restore it
    https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • How can I shift my acrobat from old computer to new one?

    I have intalled adobe acrobat standard on last November to my computer.
    Now this computer broke down and I would need to move this software to new computer.
    How is this possible?
    I have serial number.

    To reinstall on the new computer you will need
    - serial number
    - CD or install file you saved from download
    - old serial number, if it was an upgrade
    It may say "too many activations"; if so, contact Adobe

  • How can we  identify the mails from the mails that have been read previousy

    Hi
    i m using java mail api to fetch the mails. but i am facing a problem that is every time i fetch all the mails in my application.
    Is there any way by which i can set a flag or something so as to i can identify the mails which have been processed earliar.
    please help me out.
    Dushyant Kumar

    POP3, right? See the JavaMail FAQ.

  • How can i stop my iphone from allowing computers to download photos when connected?

    eg. if someone steals my phone and plug into there computer the windows photo download box pops up when connected and allows photos to be downloaded even with passcode. It doesnt make sence to me that if you try and get on my phone you cant look at anything, but connect it to a computer and it allows you to download all pictures and videos.
    Thanks

    What troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • How can i delete junk in my thunderbird. I have one that i dont want

    I have 2 junk files in mu thunderbird and i just want to delete one of them. How do i achieve this???

    Options to delete a selected email:
    * Select email so it displays in Message Pane and click on Delete button.
    * Right click on email in list and select 'Delete Message'.
    To delete all emails in a Junk folder:
    * Right click on Junk folder and select: Empty Junk.
    Remember to periodically compact the Junk folder to remove all hidden from view marked as deleted emails.
    Right click on Junk folder and select 'Compact'.

  • How can I keep my child from UNBLOCKING contacts or numbers I have blocked? I know in restrictions when you disable account changes at least on ios 6,this greyed out the iMessage button so the kids couldn't deactivate their text feature.

    Here's the issue.  Kids got themselves into some trouble on iPods.  We set all restrictions any turned off iMessage etc, which I noticed they can't turn back on bc it's gray with the don't allow account changes set.  BUT, it still allows Wi-Fi to be turned on and off!  How can I disable them being able to turn that on wo asking me??  In ios 7, the blocking feature, fabulous, BUT, how can I keep the kids from UNBLOCKING numbers I have blocked?  What I am looking to do actually is allow my kids to be able to text family but block everyone else.  And ask me to turn on wi fi.  How and can this even be done?  Right now my d text is turned off completely.  And she knows the inside and out of her device so she can turn wi fi on herself.  On vacation she entered the wi fi code of our condo and so I did forget network, which didn't work and wi fi kept connecting anyway wo requiring password again!  HELP!  Thanks :)  Also, they have iPods now but am asking these questions based on them getting our 4s's with ios 7.

    TeresaBoo, I empathize with your dilemma and have a similar problem. I'm trying desperately to keep my teenage daughter away from a controlling and abusive boyfriend. Of course, she is in denial and thinks it's love. Sure, I can block text messages through our wireless provider, but iMessages run on an independent network. I can block a phone number from iMessaging on her phone, but she can unblock it just as easily. I wish there was some way for parents to create a password to protect settings. Don't let negative comments get you down. Honestly, if someone can't relate to your question or offer help, why are they even bothering to comment??

  • How can we call a report from a form.

    how can we call a report from an existing form.

    Have you searched the Forms help system? It shows you how to use RUN_REPORT_OBJECT

  • How can I download a video from a trusted site two minutes in length ?

    How can I upload a video from a trusted site to an installed version of Adobe Flash Player ?
    What is involved in downloading a two minute government promotional video for a travel destination ?

    For YouTube videos
    http://www.any-video-converter.com/mac-tutorial/6-ways-to-download-youtube-video s.php
    For other sites it depends upon the site.

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

Maybe you are looking for