How can I configure an outgoing server that has a different password than the rest of my email account?

I have a work email account where the password for my incoming server is different than the password for my outgoing server. I cannot find how to change this in the outgoing server settings on thunderbird. Any help would be very appreciated!

Try to add another SMTP server using correct password then tell the mail account to use that smtp server.
* Tools > Account settings > Outgoing Server (SMTP)
* click on 'Add'
* enter a Description so you can easily tell which server this is.
* enter server details.
* userbame = full email address
* password = correct smtp password.
* click on OK
Then tell your mail account to use that smtp server.
* select the mail account name in left column
* bottom right section 'Outgoing server (SMTP)
* click on drop down and select the smtp server you just added.
* click on OK to save changes to Account Settings.
Note: Account Settings can be located via various methods:
Menu Bar
* Tools > Account settings
Mail Toolbar:
* menu icon > Options > Account Settings
FolderPane:
* right click on mail account and select 'Settings'

Similar Messages

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

How can i hide phone apps so that if kids take my mobile the couldnt be able to make calls. At the same time when someone call me I could be able to attend call. is there any control to lock phone's apps or hide it.

how can i hide phone apps so that if kids take my mobile the couldnt be able to make calls. At the same time when someone call me I could be able to attend call. is there any control to lock phone's apps or hide it.

Hi there
Apple doesnt give this feauture and there are certain apps in app store under utilities which provide password facility under this app and u can store photos videos and orther stuff and lock so
Kids will be not able to access this single app ortherwise there is no such feature of locking apps feature given by apple
<Edited By Host>

I am trying to hook up a airport express from a work server that has a assigned ip address. the airport works but no internet

I am trying to hook up a airport express from a work server that has a assigned ip address. the airport works but no internet

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

What can i do about my iphone that has a blue tint to the screen when i have sunglasses on?

what can i do about my iphone that has a blue tint to the screen when i have sunglasses on?

That sounds like an issue with the sunglasses and possible polarization...there is nothing that you can do to offset that on the iPhone itself.

SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate Dimension

Hi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Can i lock an app on my iPhone with a different password than the one i use to lock my phone?

can i lock an app on my iPhone with a different password than the one i use to lock my phone?

This should work; one of my e-mail accounts is my own domain through Gmail. Make sure your username is set to your full e-mail address (like [email protected]) rather than just your username.
Did you set it up on your iPhone as an IMAP account, or as a Gmail account? It should work perfectly using the Gmail setting. It can work as IMAP, but you need to jump through a few hoops to get there.

I have an old iphone4 that I want to give to a friend that has a different carrier than I. I'm havaing difficulty understanding the instructions from Apple. Why do I need to restore my phone if I have already updated my iphone 6

I have an old iphone 4 that I want to give to a friend that has a different carrier than I. Why do I want to restore my old phone to "unlock" it. I erased all data when I updated my new phone.

If you have arranged with your carrier to unlock you iPhone, and they have sent you an e-mail telling you that it has been unlocked and to follow instructions to unlock, then you will need to restore in order to complete the unlock.

How can I configure a party such that this party can submit both 4010 and 5010 transaction?

I try to configure a party such that this party can submit both 4010 and 5010 transactions.
I encounter error related to ISA11 field.
When I submit a 4010 transaction, I need to uncheck the 'Use ISA11 as repetition separator' box in the X12 Interchange Processing Properties page of the party.  If not I will encounter error if the character 'U' in ISA11 appears as content inside
the transaction.
On the other hand, if I submit a 5010 transaction and left the 'Use ISA11 as repetition separator' box uncheck, I will encounter the following error:
Error: 2 (Field level error)
     SegmentID: ISA
     Position in TS: 1
     Data Element ID: ISA11
     Position in Segment: 11
     Data Value: ^
    7: Invalid code value.
The character in ISA11 in 5010 transaction is '^'.
Is there any setting or trick I can use such that I don't have to adjust the 'Use ISA11 as repetition separator' box everytime a different version of EDI is submitted by the party.

Hi,
    The problem you are describing is not because of Version of the document but actually it is because of different kind of ISA11s you are using for one party. It can happen with the same verion document as well.
So for solving it You can right a pipline component and put it before edi-receive pipeline component. In this pipline component you can search ISA11 and replace with 'U' if you do not want to use it.
But I think the problem will come further becauase if you have '^' in ISA11 then most probably you would be using it in document as repetition separator. So please check if you are not using '^' in the doc and then apply this pipeline component.
Thanks
Gyan
If this answers your question, please mark it as "Answered".

How do I configure snow leopard server to allow local client to access the server using its public domain name

I have SLS 10.6 running on my local network with DNS configured.
I can access the server from a client on the lan using server.local or server.domain where domain name is my publically registered domain,
From the internet I can access my server using the registered domain name i.e. www.domain.com.
Is it possible to set my server up so that www.domain.com also reaches the server when used by a client locally? At present I get a page not found error.

The configuration you're aiming for is called split-horizon or split-brain DNS, and it's quite possible. It can get slightly hairy when you have different stuff using the same host name for different purposes, for instance, and you'll need to track all external DNS entries in your internal DNS server when you're running "split".
Here is how to set up DNS services. Split-horizon is one of the options listed there.
My preference is to use a different domain or subdomain within the network, and to avoid using split-horizon where I can reasonably manage it. One domain name is configured for and reachable outside and is effectively public, and the other domain (or a subdomain) is inside and private and only reachable directly or via VPN, for instance.

How can I set up Mavericks Server on a Test Mac without affecting the production server

I have Mountain Lion server running as on an xserve as our main server, it has developed a few issues particularly related to Profile Manager and Certificates.
So I was going to use the move to Mavericks as an opportunity to have a fresh start.
So I want to set up Mavericks Server on a mac mini temporarily to test it and configure all the services before moving it to the Xserve as the main server.
My question is what is the best way to do this, obviously I can't use the same IP or hostname as the main server if it is connected to the network, and some services can't be set up without a network connection.
So do I give it a new IP and hostnmame for now and then change it later on, my concern is that changing the hostname might cause issues down the line.
So what is the best way to set up a fresh server in preperation as a drop in replacement of the current server?

Ok I got the test server set up fine and cloned it over to a spare partition on the Xserve.
But when I booted into the new partition several things broke.
1st the IP address changed itself despite the fact it is set to Manual, The Alert section of Server.app let me repair this.
Profile Manager no longer worked, the web page just said Profile manager could not be found, was working fine on the test mac
Tried deleting the OD master and resetting Profile Manager but it still didn't work.
DNS needed repairing and restarting
I decided at that point to abandon it and go back to the test mac where everything is still working.
Any tips for overcoming these issues.
I have thought maybe it would be best to turn off all server services before making the clone and then turn them on one at a time once it has been restored to the new partition on the xserve
Also if the certificates that are created when making an OD master were made on the mac mini does that cause a problem when it has been restored to a different machine, should I leave OD off and just set it up when it is in its final place?

How can I configure my EDIROL FA-101 in 5.1 Surround in the CONTROL PANEL?

Hi.I own a windows 7 pc with a realtek audio system.
I cannot configure my pc to 5.1 in the CONTROL PANEL.I've even installed the latest driver and 5.1 still doesn't show in the window,only stereo.
I've noticed that recently someone had a similiar problem at http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio/How-do-I-configure-5-1-surround-on-s3480a/m-... but I dont get a 'SUPPORTED FORMATS' window where you get a DOLBY STEREO option to select.
Please help.
Regards,
Richard Steed

If you use the JDBC driver that's included in the AS/400 Toolbox for Java you don't need to use ODBC at all, you can access the AS/400 directly. See this link:
http://www-1.ibm.com/servers/eserver/iseries/toolbox/

How can I reset my web server settings to factory default without reinstalling the operating system?

I have a MacBook Air that has been upgraded over time from OS to OS. I'm currently running Yosemite.
I don't have any issues with the computer, it is running fine. Over the years, however, I've tinkered around with the server in different ways (the apache and php that shipped with OS X, MAMP, and with NGINX) and when I went to get back into some development it seems as though there's some conflicts.
What I'd love to do (assuming it is possible) is reset all of the web server's factory settings so I can just move forward from that point (Apache, PHP, MySQL, etc.).
I saw there was a terminal command for OS X Server that allows you to reset all of the server settings to how it came from the factory.
Is there a similar command that works for non-OS X Server or a utility that can restore the web server settings?

there probably is a way, but the success rate would be fairly low. you say you don't want to reinstall the OS, why? you know that reinstalling it keeps all your files and settings as they are, while resetting system files? (OS X Mavericks: Reinstall OS X)

How can I configure ECC6.0 to use LDAP (Active Directory) password

We're setting up an integrated authentication between the ECC 6.0 and the LDAP server, in our case the Microsoft Active Directory. We have some users that can't use WebGui because some features, that only run in the SapGui. We have already configured UME in the Sap Portal accessing directly the ADS server, and Sap Logon Ticket from Portal to ECC. Everything is ok to access the WebGui and SapGui by the Portal with the Sap Logon Ticket. However it demands that all users make the authentication previously in the Sap Portal. Is there another scenario only with SAP tools, for example using Sap Logon directly to the Active Directory. Obs.: Our entire sap servers are UNIX.

I had already read all these notes.
In the last week, I tried to configure the UME in our PI/XI environment to access the LDAP. As the result, the ABAP stack was perform the authentication perfectly above the LDAP. However I had some problems with the Java stack and I comeback the back. I will try it, in the next week again.
It's what I'd like to ECC environment. Anyone has already configured the UME in an ECC? Install a basic Java stack without all Java components only the UME in order to make this integration. If its possible Ill very appreciate any documentation.
Other problem is the limitation of datasource in the UME, I didn't remember exactly but I guess that is only 5 (Authorization in the ECC, BI, SolMan, PI, APO, CRM, LDAP, Portal, etc). If it's possible I'll group the environments in different UME managers. Forget this paragraph lets focus in the integrated authentication in this thread after that authorization.

How can I delete a purchase (Mavericks) that has not downloaded from my account?

How can I delete a purchse that has not yet downloaded (Mavericks) from my account? I contacted App Store support and my responder claims to have deleted Mavericks from myaccoount. He didn't; it is still there, under the purchases tab-in the cloud. Thank you.

Hi Dah-veed
Thanks for your response. But it doesn't make sense. Mavericks wouldn't download, and although I decided that I wasn't ready for it yet (incompatibility issues), I would like to be ale to get it (OSX) in the future, and if it shows as 'purchased', I won't be able to 'start over' fresh.
Rachel

How can I configure an outgoing server that has a different password than the rest of my email account?

Similar Messages

Maybe you are looking for