How can i configure Distributed cache servers and front-end servers for Streamlined topology in share point 2013??

my question is regarding SharePoint 2013 Farm topology. if i want go with Streamlined topology and having (2 distribute cache and Rm servers+ 2 front-end servers+ 2 batch-processing servers+ cluster sql server) then how distributed servers will
be connecting to front end servers? Can i use windows 2012 NLB feature? if i use NLB and then do i need to install NLB to all distributed servers and front-end servers and split-out services? What will be the configuration regarding my scenario.
Thanks in Advanced!

For the Distributed Cache servers, you simply make them farm members (like any other SharePoint servers) and turn on the Distributed Cache service (while making sure it is disabled on all other farm members). Then, validate no other services (except for
the Foundation Web service due to ease of solution management) is enabled on the DC servers and no end user requests or crawl requests are being routed to the DC servers. You do not need/use NLB for DC.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

How can I configure NI PCI 6221 and DAQ SCB-68 for pressure sensors?

Hello
everybody,
I am using the measuring board (NI PCI 6221) and DAQ
SCB-68 for the data acquisition.
With the DAQ-Assistant I created AI for the voltage of
pressure sensors. In a big indicator panel from this DAQ-Assistant I see the
voltage for both sensors in the correct size. But if I set sensors in the
blockdiagramm to control the signals for sensor one I get a wrong voltage size
and for sensor 2 nothing.
How can I configure this data acquisition equipment to
get the correct signals?
Thanks a lot for your help.

I do not know the type of sensor you are using. But pressure transducers may have a very low output voltage(in the mVolt range). They also need an excitation voltage. Here is an introduction. http://focus.ti.com.cn/cn/lit/an/sloa034/sloa034.pdfThen working with pressure sensors I always use 3 stages in the circuit.
1 Instrumentation Amplifier as a preamp
2 filterstage
3 Final amp and output buffer
(you may combine stage 2 and 3)
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Search on App and Front End servers

Hi, we migrating from SharePoint 2010 to SharePoint 2013. And I have a question for Search Service Application.
On SharePoint 2010 Search application we have Crawl hosted on APP server and index partitions hosted on Front-end servers.
On SharePoint 2013 Search application in Search Application Topology I see only App server with all components marked as OK.
Is it enough to have only one App server in Search Application Topology. Or should I add Front-end server to Search Application Topology too?

Hi,
For a good user experience and performance, it is recommend that WFE servers hold Query processing component, App servers hold Analytics processing component，Content processing component，Crawl component，Search administration component. Here is the PowerShell
Script for Configuring Enterprise Search Topology:
$hostWFE = Get-SPEnterpriseSearchServiceInstance -Identity "sp"
$hostApp = Get-SPEnterpriseSearchServiceInstance -Identity "app"
Start-SPEnterpriseSearchServiceInstance -Identity $hostWFE
Start-SPEnterpriseSearchServiceInstance -Identity $hostApp
Get-SPEnterpriseSearchServiceInstance -Identity $hostWFE
Get-SPEnterpriseSearchServiceInstance -Identity $hostApp
$ssa = Get-SPEnterpriseSearchServiceApplication
$newTopology = New-SPEnterpriseSearchTopology -SearchApplication $ssa
New-SPEnterpriseSearchAdminComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchCrawlComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchContentProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchAnalyticsProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchIndexComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp -IndexPartition 0
New-SPEnterpriseSearchQueryProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostWFE
Set-SPEnterpriseSearchTopology -Identity $newTopology
For more information,you can refer to the articles:
https://technet.microsoft.com/en-us/library/jj862354.aspx
https://technet.microsoft.com/en-us/library/dn342836(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

How can I get connection between VC and back end ABAP system

Hi, I'm developing the kits in the VC platform, and I need to access the back end system designed by ABAP. For example, the system provides some public functions(not web services), and I hope when I click the "search" button, the VC front can call the remote functions and get the data from the back end system. In addition to that, the most important is I must keep the connection real-time. How can I do it?

Thanks for your help. At present, my VC version is 7.1.4 which isn't installed in the portal server but in local machine, and I'm new in the VC. What I want is when I click the "search" button(in the properties pannel), I can get the data from the remote server. I know the VC 6 provides similar functions, but the current version doesn't. Could you explain the details of how to get and keep the connection between them? Thanks so much.

Visual composer how can i populate data in backend from front end.

Hi Guru's
I have designed a basic screen using zbapi_salesorder_getlist. I have requirement in which i have to enter some details in the output screen, it then should come back to back end and update a Ztable.
For this i have created and deployed till intial output screen(i will enter some values in the input and i get some result in the output----> i ma using a RFC to get the data from backend) in the output the user enters some values which needs to updated a ztable in the back end. Give ur inputs how can this be done any link if possible so that i can complete this concept.

Thanks Marcel,
I am working on your blog example.
Nutan,
3.> Then for updating backend. You just drag and drop the second bapi in your model and then create the forms as per your requirement. This will be helpful.
can u please elaborate, what ever input i am giving is not coming to the back-end. Any sample example will help me to solve this. what ever you have mentioned in step 1 and step 2 are working properly, but i am not able to get past afer the two steps.

HT204088 how can i check the charge made on my credit card for 24.99 on 12/10/2013

Apple shows no charges for the last 90 days.

$24.99 would tie in with the subscripton fee for iTunes Match - do you have that and was it due for renewal ?

I'd like to Know how can I configure a Lookout process and Zetron 1730 and Zetron 1732

I'd like to configure a Lookout proccess with a Zetron 1730 controller and a 1732 RTU.When I configure an I/O of the Digital Module(connected to the 1732) as an Output and another one as an input,when I excite the output from the Lookout process it also excites the input in the screen.If I do the same configuration separately (just with a 1730 and a Digital module)it works OK!

Iteco,
I am familiar with using Zetron with Lookout. But I'm have a hard time understanding exactly what the problem is.
There is a good Zetron Demo that NI has for Lookout, It can be found here.
http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/fe8bac9d3fbb69ac86256ae100563b9a?OpenDocument
Hope this helps.
Oliver Scheurer
Aegis Solutions, Inc.
2660-T Yonkers Road
Raleigh, NC 27604
Phone: (919) 861-0103 Ext. 231
Fax: (919) 861-0104
www.aegis-solutions.com

If I want to create a Listbox to run multple tests, how can I create a check all and clear all button for selection/deselection of all the tests

create check all/clear all button for listbox

Hi Arien,
Parthabe is right, next time, try to create a new thread.
So when others try to search for a topic, they can actually find it.
I developed this example code that you can take a look at.
It's using property nodes of the chart to control which plot to show and to force invisible
Message Edited by Van_L on 03-06-2008 07:19 PM
Van L
NI Applications Engineer
Attachments:
choose plot.vi ‏25 KB

How can i modify my directoriy names and package alltogether once for all?

thanks !

There are programs, which I suppose are called refactorers (refactorors?), which restructure your code for you. They probably support modifying the package...
I've never used any of these myself. For me it's just easier to modify and move the files.
Do a Google search for stuff like "java refactor", JRefactory, XRefactory, etc.

How can I configure iPlanet WS6.0 to recognize relative paths for DTD file using crimson XML parser running within a java servlet2.2?

Actually, I can get it working using an http://.... reference while with relative reference ( i.e. just the dtd filename) it doesn't work; here is the stack trace:
org.xml.sax.SAXParseException: L'URI relativo "MLP_SLIA_200.DTD"; non puo essere risolto senza una base URI.
     at
org.apache.crimson.parser.Parser2.fatal(Parser2.java:3185)
     at org.apache.crimson.parser.Parser2.fatal(Parser2.java:3176)
     at org.apache.crimson.parser.Parser2.resolveURI(Parser2.java:2758)
     at org.apache.crimson.parser.Parser2.maybeExternalID(Parser2.java:2730)
     at org.apache.crimson.parser.Parser2.maybeDoctypeDecl(Parser2.java:1129)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:489)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:442)
     at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
     at tilab.nimble.interfaceLIF.ParserDomXML.parseDocument(ParserDomXML.java:55)
     at tilab.nimble.interfaceLIF.ReqLIFTrackingServlet.doPost(ReqLIFTrackingServlet.java:777)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
     at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
     at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)

Actually, I can get it working using an http://.... reference while with relative reference ( i.e. just the dtd filename) it doesn't work; here is the stack trace:
org.xml.sax.SAXParseException: L'URI relativo "MLP_SLIA_200.DTD"; non puo essere risolto senza una base URI.
     at
org.apache.crimson.parser.Parser2.fatal(Parser2.java:3185)
     at org.apache.crimson.parser.Parser2.fatal(Parser2.java:3176)
     at org.apache.crimson.parser.Parser2.resolveURI(Parser2.java:2758)
     at org.apache.crimson.parser.Parser2.maybeExternalID(Parser2.java:2730)
     at org.apache.crimson.parser.Parser2.maybeDoctypeDecl(Parser2.java:1129)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:489)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:442)
     at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
     at tilab.nimble.interfaceLIF.ParserDomXML.parseDocument(ParserDomXML.java:55)
     at tilab.nimble.interfaceLIF.ReqLIFTrackingServlet.doPost(ReqLIFTrackingServlet.java:777)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
     at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
     at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)

How can I check the current cost and budget in SAP?

Dear experts,
How can I check the current cost and budget in SAP for the PR approval?
Table:COEP, COBK, COSS COSP can not find below information:Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Best regards,
Merry

Dear expert,
I need below information:Project_id,Cost_code,Nature_code,Section_code,Work_type,Work_code,Cost_type,Suffix,item_desc,Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Can you tell me which table and filed can find them?
Many thanks.
best regards,
Merry

How can I configure Cache settings ? Frequency , capacity ?

How can I configure cache settings like capacity and frequency? System is very slow . We experience system degradation.

# type about:config in the browser's location bar, and then press Enter.
# If a warning displays, click I'll be careful, I promise!.

How can I configure MA to display "speaking" OpCode and Task names

If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
Regards,
Alexander
Kind regards, Alexander

Hi Paul,
please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
part of the manifest is here:
<tasks>
<task name="ReadingFromGdb" value="1"/>
<task name="LogReadPreInvoke" value="65532"/>
</tasks>
<opcodes>
</opcodes>
<keywords>
<keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
<keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
</keywords>
<events>
<event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
</events>
<templates>
<template tid="LogGdbReadPreInvokeArgs">
<data name="fullName" inType="win:UnicodeString"/>
<data name="methodName" inType="win:UnicodeString"/>
</template>
I hope, it helps you to understand details of my questions.
Regards,
Alexander
Kind regards, Alexander

How can we transport the partner profiles and Port configurations

Hi everybody,
How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
Your replies are really apreciable.
Thanks and Regards,
Vijay.

Hi,
please have a look of the OSS note: 182172
>>
The partner profiles are stored in the following tables:
Table EDPP1: General partner profile
Table EDP12: Partner profile outbound, additional data NAST
Table EDP13: Partner profile outbound
Table EDP21: Partner profile inbound
Table EDIPHONE: Connection to SAP telephony (optional)
You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
<<
Rgd
Frédéric

SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

Hi,
We have a SharePoint Foundation 2013 with SP1 Environment.
In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
after.
Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all. We
tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
to the machine hosting SharePoint 2013 admin component" is coming up.
http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Can I get some help please?
Karthick S

Hi Karthick,
For your issue, could you provide the
detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For troubleshooting your issue, you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
Foundation:
[string]$farmAcct = "DOMAIN\service_Account"
[string]$serviceAppName = "Search Service Application"
Function WriteLine
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Function ActivateAndConfigureSearchService
Try
# Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
Start-SPEnterpriseSearchServiceInstance $env:computername
Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
$appPool = Get-SPManagedAccount -Identity $farmAcct
New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
$saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
$svcPool = $saAppPool
$adminPool = $saAppPool
$searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
$searchService = $searchServiceInstance.Service
$bindings = @("InvokeMethod", "NonPublic", "Instance")
$types = @([string],
[Type],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
$values = @($serviceAppName,
[Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
$methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
$searchServiceApp = $methodInfo.Invoke($searchService, $values)
$searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
$searchServiceApp.Provision()
catch [system.exception]
Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
finally
WriteLine
ActivateAndConfigureSearchService
Reference:
https://sharepointpsscripts.codeplex.com/releases/view/112556
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Eric Tao
TechNet Community Support

How can i configure Distributed cache servers and front-end servers for Streamlined topology in share point 2013??

Similar Messages

Maybe you are looking for