How can i connect a usb device (keyboard) into ipad 4

The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.

Similar Messages

How do you connect a USB MIDI keyboard to iPad Air?

Hello,
I can't get my USB keyboards to connect to my iPad Air. I used to use the camera connection kit with my 1st gen iPad and it worked perfectly. Now when trying to connect using my camera connector plugged into a lightning to 30 pin adapter with the iPad Air I get no response when trying to use my keyboards with Garageband, etc. This seems like a step backwards!!!
Can anyone advise on how to use a USB MIDI keyboard with the iPad Air?
Thanks,
Richard

Same problem here...
I just read on another forum that someone managed to connect a midi device using a simple converter.
I have a digital piano with the square type USB connector, bought an adapter to convert the iPad Air's ligtning USB cable's USB end to that square connector, plugged it in, GarageBand did not respond to the Midi input.
on a macbook pro it works ok, but would be nice to use the iPad now that I bought it...

How can I see my USB device in the measurement&automation explorer?

I'm trying to use an USB-device with LabView7.0.
I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
unication from LV wouldn't work?
How can a make my USB device visible in the meas.&aut. explorer?
Regards
Tobias

Tobias,
In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
Scott

HT4356 I from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356

How can I rename a Bluetooth device on my iPad?

How can I rename my Bluetooth device on my iPad? I just bought the same model of a Bluetooth speaker that my daughter uses and since I babysit for her often, I want to be able to connect to either device. And I want to be able to distinguish by name each device.

On your iPad you cant. There are no settings/preferences in the bluetooth section.

How can i connect my iphone 4 with my ipad retina by bluetooth???

how can i connect my iphone 4 with my ipad retina by bluetooth???

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
Tethering an iPad to an Android Cell Phone
http://everydaylife.globalpost.com/tethering-ipad-android-cell-phone-33675.html
How to Reconnect a Forgotten Bluetooth Device on an iPad
http://techchannel.radioshack.com/reconnect-forgotten-bluetooth-device-ipad-1037 .html
 Cheers, Tom

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

How can I boot to USB device if no USB boot option in BIOS

I just purchased a Toshiba NB305-N410BL but am concerned as to how I would image the 250GB HDD if I can not boot from an external cdrom drive. I tried to backup to shared network folder but none show up on list. Only boot options in BIOS are HDD, FDD, and LAN. Thanks for all help in advance.

Hi, buddy-erp.
I don't know if my instructions apply to you because I only have the NB305 model. However, if you say you have followed all instructions, that is, 1) insured that no other USB devices are connected to your computer at bootup time and 2) have pressed F12 to enter the boot menu; 3) and then designated the USB flash drive as the source of the bootable restoration software you may need Toshiba technical support. I wonder if there is a BIOS update for your computer too. This may need to be downloaded and installed prior to beginning the restoration process. Nevertheless, as stated, I have a NB305 model and the instructions are clear. FYI (for your information), a virus infected my system and made certain changes to this process. Toshiba technical support informed me that the information displayed was wrong and the process outlined was unnecessary but did require technical support to restore it to the OEM default options.
Good luck.
Sincerely,
Bi-Ill
Good luck!
Sincerely,
Bill5960

How can I connect to the internet on my ipad without a 3G data plan?

Is there any other way to connect to the internet without a 3G data plan? I have an internet router at home from verizon, can that connect my ipad to the internet or do i still need the 3G data plan? Can u please help me?

The iPad can connect to wireless networks. So if your router is capable of broadcasting its internet connection wirelessly (so that you can access it from say a laptop) then you can go to the settings and choose wifi to connect to the router. If not you can turn on internet sharing on your computer if you have a pc or mac. This will share your connection wirelessly so that you can connect your iPad to the internet.

How can I connect my mobile device on the same network with my printer

I have pictures on my mobile device but I am unable to print them on my HP Photosmart plus printer. I was wondering how am I able to make sure that my printer and my mobile device is on the same network so I can print my pictures or either be able to save them to my memory card?

Hi,
Are you talking about iPad, iPhone ?? If YES then please check your printer on this list,(updated on 15Dec2011) it must be an AirPrint enabled printer to be able to print from iPad, iPhone. If YES (again), you can use AirPrint on your iPad to print.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I connect my BT Hub 5 into a room that doe...

Hello, I have recently upgraded my broadband to fibre optic and upgraded my Hub to BT Hub 5. I have a problem with connecting to the hub wirelessly, I have my computer and consoles set up on the top floor of my house ( 3rd floor ) but the wireless signal is too weak. Is there any possible way I can move my Hub else where ( possibly the same room as my set up? ) using a wired connection? I only have 1 master socket in my house and it's in the bottom floor. Is there anything I can buy that can extend my broadband wire so I can move my Hub? Help!!!

This page should help.
http://www.shop.bt.com/learnmore/bt-branded-products-and-services/bt-connectivity-devices/
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How can I connect to a USB keyboard .

How can I connect to a USB keyboard .?

iPads do not support a USB keyboard.
You need a Bluetooth keyboard.

How many devices can I connect over USB to Configurator simultaneously

Hi,
I am looking for confirmation (preferably from Apple!) as to how many iOS devices can be connected via USB to Configurator simultaneously?
There is one document from Apple which states 30 devices is the limit but we use carts with many more than this which Configurator appears to handle fine. You can also buy carts which accept more than 30 devices from the Apple Education Store.
What I really need is an official document stating the limit or some feedback from you guys on your experiences with Configurator and high numbers of devices!
Any help would, of course, be appreciated
Thanks.

Depends on your USB hardware....I have had two Bretford 30 unit carts running and while slow will work...Actually in our last deployment I went back to one MacBook Air AC station per 30 cart (4-5 carts per building) as the timing worked out better with temp workers and workflow....

How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?

How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?

Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards.

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

How can i connect a usb device (keyboard) into ipad 4

Similar Messages

Maybe you are looking for