HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
Since you use the term "PC," are you using an Apple computer or something that is Windows based?
Barry

Similar Messages

  • How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

    how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

    Yes, try to restore your iPhone from iTunes or iCloud backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Tell us the result if you will try.
    <Link Edited By Host>

  • How can i connect iphone 3 to ipad 2?

    how can i connect iphone 3 to ipad 2?

    You can't physically connect an iPad and iPhone. You can blutooth connect, but not sure about iPhone 3.
    iOS: changeing Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to  your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_ing.html
    How to Pair Bluetooth Device to iPad
    http://www.ehow.com/how_6194904_pair-bluetooth-device-ipad.html
     Cheers, Tom

  • How can i connect iphone 4 with other mobile through bluetooth

    how can i connect iphone 4 with other mobile through bluetooth

    You can't. iPhone does not have this feature.
    Some iOS apps will allow you to connect to other iOS devices for peer-to-peer games, or sending photos, but not to other makes of phone.

  • How can i connect iphone 5 with izon wireless camera?

    Hi
    How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
    What is wrong??????????

    I would check if they have some info here
    http://steminnovation.com/support
    and then I would test it with other phones or a computer to verify that it's not broken

  • How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"

    That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.

  • How can i unlock iphone 4G from japan to use jn nepal

    How can i unlock iphone 4G from japan to use jn nepal??

    You cannot. Japanese carriers will not unlcok the phone. There is no legitimate way to unlock a Japanese iPhone.

  • Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

    Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
    It does not recognise my old connection.
    Same case with wifi connection as well.
    Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
    But before it use to display my name now it is coming as Apple I-phone.
    Anyone who can help on this, how to get it resolved.
    - I have update my phone with backup (OLD version of IOS) but issue still presists.
    This is the same issue somone mention on below.
    http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
    Kind Regards
    @ru..

    If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

  • How Can I connect to MS Access or DBASE using forms6i?

    Hello,
    I have installed Forms6i on my PC (No Oracle Database installed).
    I have Three Data source
    1. MS access DB
    2. Excel File
    3. Dbase4 File.
    How can I connect to these databases using forms6i?
    I have created ODBC DSN for MS Access DB, in forms6i Connect screen
    entered following
    username - admin
    password - password
    database - odbc:pay - (pay is dsn for MS access).
    It is giving following error.
    ORA-03121:no interface driver connected function not performed.
    Thanks in advance.

    Harshad,
    This forum focuses on connectivity solutions for the database. Your question would be best posted on the General application server forum.

  • After I installed the Moare recording, the firefox can't connect to internet. BTW I used the proxy and it works fine in another browse.

    After I installed the Moare recording, the firefox can't connect to internet. It worked fine before I installed Moare.
    I used the proxy and it works fine in another browse.

    I can not find "Moare recording" on the internet. Please see the following thread for troubleshooting. [https://support.mozilla.org/en-US/questions/935081?esab=a&s=proxies&r=3&as=s following thread;]

  • I have a Rs232/Rs485 converter(CV 24).How can I connect it from a rs485 to a rs232 cable?

    I have a RS 485(8 serial outputs) and a motor with a rs232 cable. I don´t have a comunication between the motor and the card...also I have a rs232/rs485 converter. How can I connect the converter to the card. Give me all the possible solutions.

    Hey bubuse,
    First of all make sure your motor is RS232. If you are using one of NI's 8 port RS485 cards (http://sine.ni.com/apps/we/nioc.vp?cid=1846〈=US) it should include a dongle that takes the connector out to individual 9-pin dsub connectors.
    From there, most RS232 cables have 9-pin dsub connectors and the converter should just plug in between the cables. Here is a link that shows the pinouts and voltage differences of both protocols.
    http://www.ni.com/pdf/manuals/371253a.pdf
    However, these devices rarely work well. If your motor is RS232 they I would suggest you purchase a RS232 board. NI has a new line of boards that are extremely fast and easy to use. They can hit custom baud rates and will show up as normal COM ports on your computer.
    In the long run you will have fewer problems.
    http://sine.ni.com/apps/we/nioc.vp?cid=13694〈=US
    I hope this helps out.
    JoshuaP
    National Instruments

  • How can i connect mobile internet (USB devices)??

    Is there anyone who knows how can I can connect a mobile internet device connected through a USB port to my IPad-2?

    The iPad only supports wifi and 3G, it can't connect via a USB connection - it can use an iPhone as a mobile hotspot (if your carrier supports it) or mifi devices.

  • How can I connect to Internet when there is a Gigabyte switch after Airport Extreme?

    I have a new Airport Extreme Base station. I have a wired home network set up through out the house. After the Airport Extreme, I have two gigabyte switches. I can connect to the network after the switch, but not the internet. I have also purchased new switches just to make sure this was not the problem. I connected the cable that goes into the switch into my laptop and was able to connect, however after the switch I still cannot connect. Wireless work fine. I need the wired connection for my DirecTv, X-box, Sony Bluray, etc. If it helps I have Comcast with a Motorola SB6120 Modem.  Any suggestions as to how I can get connected?

    Hi - I have only dealt with one question like this - it was with a different modem but it also had the new hi-speed technology and they were trying to connect the base station like you are with a new gigabit switch - the bad news is that no matter how many resets and reboots and different brand switches and cables were used, it wouldn't work - I told them to contact both the modem and the switch manufacturers but I haven't heard the outcome - maybe one of the gurus will weigh in an fill in the blanks.
    Charlie

  • Can't connect to internet from my PC using Nokia N...

    Hello.
    I bought a Nokia N8 recently. Its awesome but I still couldn't solve this problem.
    I can't connect to the internet from my PC using N8 as a modem. 
    When I use Ovi Suite, it says "Failed to establish a network connection". 
    When I use the "Conn. PC to net." mode.. the application says "Valid connection could not be found". But I'm confident my operator's plans and settings/destinations are correct as I can connect and browse the internet from the phone. (Pls still say something if applicable)
    When I try to connect to the internet using Windows Network and Sharing Center, it says "A device or driver is not functioning properly" or something similar
    Pls help me with this problem. Its really, really urgent
    thanks

    You haven't establized a connection to the network,  so you can't use MS network sharing which means you are sharing the PC connection to others. What you wanted is to use the N8 modem to connect to the network.
    Uninstall Ovi Suites & install PC suites for your N8. Make sure all drivers are loaded properly. Run pcsuite & just click the network menu to connect to internet. By the way what's the version of your MS OS; XPsp3, Vista or Windows 7 ?
    Knowledge not shared is knowledge wasted!
    If you find it helpfull, it's not hard to click the STAR..

  • HT201205 How can I connect to a bluetooth devise and use the head phones at the same time? I have a new  ipod Touch  (32GB)'and want to play through a stereo system using the headphone jack and connect to a blue tooth speaker in another room

    How can I

    Not possible, there is a physical switch inside the headphone port, when the headphone jack is plugged in the switch is open and disables the iPod speaker and Bluetooth networks. Cheers.

Maybe you are looking for

  • JDBC-XI-FILE scenario. How to extract data from multiple tables

    Hi, At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ?? If I got to extract data from single table using JDBC adapter I can put the below query in communication channel SELEC

  • My cd drive dosen't work

    so basically what happens is, that i put a cd in, it takes the cd i can hear some noises, then it makes a buzzing type of noise. then pauses, makes the buzzing noise again, then pauses and makes the buzzing noise for the third time and then spits the

  • My macbook pro cpu temperature is too high??please tell me correct fact and information

    i mistake deleting my activity.......re question... I'm using macbook pro retina 13inch 2013 late version. my macbook has NO external graphic card, just iris graphic. when i was playing diablo3 or watching movie by using bypass ip address, my cpu tem

  • New in BI, any suggest how to start?

    Hi : New in SAP world.  Need suggestion on how to start to learn SAP business Intelligence.  My background is oracle E-Business developer.  For reporting purpose, I am using Oracle discoverer, Oracle Report and BI publisher.  My manager wants me find

  • Map network drive from windows 98 to server 2008 R2

    Guys I have some old Windows 98 systems these 98 systems are attached to pieces of equipment on the warehouse floor. So with that said there is no way to upgrade them. I would like to map a network drive from these 98 systems to a 2008 R2 file server