How can i connect mobile internet (USB devices)??

Is there anyone who knows how can I can connect a mobile internet device connected through a USB port to my IPad-2?

The iPad only supports wifi and 3G, it can't connect via a USB connection - it can use an iPhone as a mobile hotspot (if your carrier supports it) or mifi devices.

Similar Messages

  • Are mobile internet USB devices still not working on Snow Leopard?

    Are mobile internet USB devices still not working on Snow Leopard? I actually had to go back to my previous operating system to get this to work. I would however prefer to use Snow Leopard...if Apple & HUAWEI have finally got their act together!

    There appears to be a problem with drivers for USB wireless modems with 10.6. I upgraded from Leopard to Snow Leopard and now can't connect to the internet with my wireless modem. I hope Apple sort this out soon. Or maybe it's Huawei that needs to put a 10.6 driver into its software.

  • How can I connect to a USB keyboard .

    How can I connect to a USB keyboard .?

    iPads do not support a USB keyboard.
    You need a Bluetooth keyboard.

  • Can I use a virgin mobile internet USB device with OS X?

    Is there a way to use the USB virgin mobile internet device with OX M??

    I cannot say for sure if the g/b vs n is the cause, but if all other devices like the AE and that one device does not, you go with the odds.  Others will have to chime-in on that.
    And I recommend NetGear (not necessarily *above* LinkSys) because my 3-year-old NetGear router has been serving my MBP fine for 3 months ... no glitches.

  • How can I access an unsupported usb device that's seen by system profiler

    is there a way to access an unsupported usb device? my parents bought my daughter a cheap and easy to use digital camera and I am looking for a way to access the photos. the camera's manual mentions that there is no mac driver and there are no plans to develop one. I plug it in anyways in the event the system / Iphoto recognizes this, But I get nothing on the desktop as in a generic disk image icon. I open system profiler and My G4 knows the camera is plugged in. If this interface between the two is recognized how can I access the camera?
    does a driver have to be written to allow access? I saw a usb dev kit on version tracker but I have no clue as to how to write a driver. I could get a flash card reader but I was hoping that there may be some back door or an app somewhere to allow me to get the photos off the camera.
    thanks!!!

    Hi, Israel.
    You wrote: " I plug it in anyways in the event the system / Iphoto recognizes this"See if Image Capture recognizes the camera. Launch Image Capture, which is in the Macintosh HD > Applications folder.
    Otherwise, you're probably going to have to go the route of using a card reader. While the connection may be USB, they may be using some non-standard implementation that requires a driver.
    Writing drivers is not something you'd want to even attempt since you didn't create the hardware!
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How can I connect to Internet when there is a Gigabyte switch after Airport Extreme?

    I have a new Airport Extreme Base station. I have a wired home network set up through out the house. After the Airport Extreme, I have two gigabyte switches. I can connect to the network after the switch, but not the internet. I have also purchased new switches just to make sure this was not the problem. I connected the cable that goes into the switch into my laptop and was able to connect, however after the switch I still cannot connect. Wireless work fine. I need the wired connection for my DirecTv, X-box, Sony Bluray, etc. If it helps I have Comcast with a Motorola SB6120 Modem.  Any suggestions as to how I can get connected?

    Hi - I have only dealt with one question like this - it was with a different modem but it also had the new hi-speed technology and they were trying to connect the base station like you are with a new gigabit switch - the bad news is that no matter how many resets and reboots and different brand switches and cables were used, it wouldn't work - I told them to contact both the modem and the switch manufacturers but I haven't heard the outcome - maybe one of the gurus will weigh in an fill in the blanks.
    Charlie

  • How can I connect to other bluetooth devices

    Hi Folks,
    Having only just become a new iphone 4s user I've now found out that my iphone will not connect to any other manufactured phones and other Bluetooth devices, is there any way around this or is it an iphone only club!!!. Many thanks in anticipation of a reply, Astonharry.

    You need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
    With iOS 8 you can use AirDrop

  • My mobile internet usb device isn't showing up in the finder?

    the usb port is working properly with other devices, and the device shows up in the system profiler but i cant seem to find it anywhere else.

    Thanks for that, but that's from a year ago and I followed all the steps and it's still not working. If anyone else has other suggestions, please let me know.

  • How can I connect the NI USB RS485 interface to an instrument with two wires?

    I am connecting the RS485 to a Dynisco UPR 700, but labview alway tell me that " Before the operation is completed, timeout expired", I donot know what is wrong. Thanks!

    That message indicates that a read timeout occured. This usually suggests either a cabling problem (the RS-485 pin-out is in the NI-Serial manual pdf), a port settings problem (baud rate, etc.), a COM port number problem (using COM3 instead of COM4, etc.), or a communication protocol problem (incorrect command sent to the device, etc.). I suggest double checking your cabling and port settings, then run your vi with NI-SPY open to see what type of port activity is occuring.

  • How can I connect to internet radio in itunes 11.0.1.12?

    Other answers refer to a radio button next to 'playlists' when 'music' is selected in the library but this doesn't appear on my itunes.

    I'm still not sure what this option (to shuffle a Playlist and then Sync that to the iPod) was or where it was in iTunes 10. This is despite your question having been raised by other people.
    Surely, since you can shuffle a Playlist on an iPod, it's not necessary to shuffle it before Syncing, is it?

  • HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

    HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

    First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
    Since you use the term "PC," are you using an Apple computer or something that is Windows based?
    Barry

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.

    I connect my mic with an M-audio mobile pre usb device.  When I try to record, I can see that my voice is recording but can't hear it during playback.  I tried different input and output settings but it didn't help.  Any help will be appreciated.

    Hear your microphone or instrument as you play and record (monitoring)
    You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
    You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
    Hide
    To turn on monitoring in the track header:
    Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
    Click the Monitor button in the header of the track you want to use.
    HideTo turn on monitoring in the Track Info pane:
    Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
    From the Monitor pop-up menu, choose one of the following:
    Choose Off to turn off monitoring. You can hear your instrument only while you record.
    Choose On to turn on monitoring and protect against feedback.
    Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
    For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
    You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
    If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
    SEE ALSO
    If you don’t hear sound from a Real Instrument 
    Was this page helpful?Send feedback.
    © 2010 Apple Inc. All rights reserved.

  • How can i connect a usb device (keyboard) into ipad 4

    How can i connect a usb device (keyboard) into ipad 4

    The only keyboards that will work are bluetooth ones and keyboards made specifically for iPad.

  • How can i connect ipad mini wifi celluar to 2g internet plan, how can i connect ipad mini wifi celluar to 2g internet plan

    How can i connect ipad mini wifi+celluar to 2g internet plan

    Hello Sir!
    After weeks of testing, i found the solution of my question. It´s quiet simply!!
    1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
    2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
         "Compartir Conexión desde":   iPhone USB  or  Bluetooth PAN
         "Con otros Ordenadores vía":  Ethernet
    3º Ethernet cable must be connected from Mac mini to Time Capsule !!
    4º In Time Capsule "Internet":  connect by:  DHCP
                                 "Network": bridged
    Nothing more!!!  Sooooo simply!!
    After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
    Also other Devices like IPad, or other iPhone, etc.
    Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
    and it´s working to.
    But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
    In- and Out-Going!
    Thank you for your help, no I made me a "small" TC expert...lol 

Maybe you are looking for