How can I connect my iPad2 WiFi (no 3G) to my wired DSL modem (not wireless capable)? is there an adapter I can connect to the modem?
Yesterday I ordered an iPad 2 WiFi version (no 3G) and I want to know if it's possible to connect it to my DSL modem that is not wifi/wireless. Is there some sort of wifi adapter I can buy to connect to the modem or do I need to buy a wireless router?
TIA
If you have a desktop that can do "Internet sharing" and wi-fi, you may be able to use that instead of buying a router. I haven't done tihs recently but played with it with my iMac before I bought a wireless router.
But a router is the better option. They're not expensive and recent ones have some decent security. I have a Netgear WGR614 (v10) with a firewall built in making me double firewalled on the desktop (where all the really critical stuff lives like banking info and all) and it has an "access control" option where you not only password your network but specify exactly which devices can connect at all. Something I like because the signal reaches the street outside the house. That's a bit more "reach" than I like. Though, funny thing, my brother (who's iPad is authorized to use my net) did a quick update by pulling into my driveway once while I wasn't even here.
Any wireless can have a surprising reach. I live in a fairly rural area and I pick up on other peoples' wireless all the time. Which, out here, I did not expect.
Similar Messages
-
HT204409 I updated and now I cant connect to wifi, how can I remove the update
I updated and now I cant connect to wifi, how can I remove the update.My other stuff works, Iphone wifes Ipad etc
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I want to connect my iMac to my Time Capsule using Ethernet. I have them connected via an Ethernet cable, but only WiFi seems to be working. How can I specify the Ethernet connection instead of WiFi? Thanks
WelkedGo to preferences, network and see if ethernet is indicated. Be sure it shows a green dot. Also be sure it is at the top of the list (above WiFi). If not click on the the wheel at the bottom and set service order.
-
HT1222 How can i resume the download of ios7 while im still connected to the wifi
How can i resume the download of ios7 while im still connected to the wifi
Don't think so. At least during my wife's upgrade, she did over the air and we had to wait until it finished, to avoid any further issues. There was no "Cancel" button and I didn't want to spend much more time trying to fix it after turning the phone off...
-
how can i fix the problem on mi ipad mini. When i updated the ios to 6.1.3 the bluetooth and wifi didn't work properly.
Hey maricel737
There are two different articles that go over troubleshooting steps for solving issues with Wi-Fi and Bluetooth. This first one goes over Wi-Fi on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
This next one outlines suggestions for Bluetooth on your iPad:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
On the Bluetooth one, I'd just skip ahead to the "Additional Information" section where the troubleshooting steps start.
Best,
David -
How can i change the name of my wifi connection on my Airport express?
The name of my wifi is Réseau de Francois with an accent on the letter E.
Now, i have many conflict with other electronic components because they do not accept french accent.
How can if change the name to reseau de francois without an accent on the letter E on my airport express 4th or 5th generation
thanksairport utility in the utilities folder.
-
How can I use the embeded GPS in my Sprint MiFi Hotspot for my location on my iPad4 wifi only device
The iPad uses the wifi network to determine the location My default connection is through my Sprint MiFi, but it does not use its location gps eventhough it is active for Maps. It did use a local tower in a wisconsin town yesterday and no it thinks I'm there and I cannot refresh it. I am brand new to apple IOS as I won the device last Thursday. I'm trying to upgrade the OS to 7 as it has 6 installed. I need to find a faster connection to do it though.
Any help wpuld be appreciatedRe: How can I get the best out of my battery life?
Hi,
When I make phone calls people on the other end have difficulty hearing me. They describe as they can hardly hear me as if I was speaking through the pillow etc). I am not touching any buttons and obviously it is not mute. This was happening couple of time in June, then every now and then. Recently it happened a few time in 2 weeks. I was trying to check if it was a reception issue but the place I spoke from is my office I make 70% of phone calls from. Can you book time for me in repair shop and address the issue.
Thank you.
Sergey Sinitsyn -
How can I change the preferred WiFi network in my MacBook Pro
How can I change the preferred order of networks on my MacBook Pro? There used to be one network at my office. Now there is a second higher speed wifi network also present which I would prefer to connect to, but the Macbook connects to the older one unless manually changed.
Apple menu > System Preferences > Network > Advanced > Wi-Fi > Drag networks into the order you prefer.
-
y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
I canno't connect my iphone with a wire to my pc. How can I save the backup on my pc?
Hello.
I can't connect my iphone with a wire to my pc as the connection slot is damaged. How can I save the backup of my iphone on my pc? I already installed icloud; but it doesn't work.
Thank you for your help and support.Your only option is iCloud, to back up to the PC using WiFi, your device has to be connected to the PC at least once using the USB cable, to set this up.
iOS: Back up and restore your iOS device with iCloud or iTunes -
We bought a used Ipod Touch from a private party. We can download music when it's hooked up to the computer but can't download any games or songs by using the wifi. How can we change the password so we can do this?
You should restore the the iPod to totally erase the iPod and add your own media to the iPod.
Connect the iPod to your computer and restore to factory settings/new iPod via iTunes.
iTunes: Backing up, updating, and restoring iOS software -
How can I restore the large battery icon on my ipad2? It has disappeard and does not appear when I charge my ipad.
It only shows when you turn on your iPad. The moment you slide from left to right it'll disappear.
Note: Charger must be connected.
http://i1224.photobucket.com/albums/ee374/Diavonex/f063e0ff.jpg -
How can I get the ipad to connect to itunes 10.6.3?
How can I get the ipad to connect to itunes 10.6.3?
The iPad mini requires iTunes 10.7 or newer to sync.
(82182) -
I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?
you can do this by keeping the external hard drive connected and doing the following
-hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
-select choose library, iTunes should bring up your explorer windows where you can search for the external HD
-after you find the external HD find the iTunes folder you just copied to it
-after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
-double click the database file and boom iTunes should load your library without having to copy it to the computer
PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
hope this helps:) -
I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?
The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password
Maybe you are looking for
-
Line Graph x axis tick label date format
Hi to all, how can i format the date of the x axis label of a line graph? by now the date label is shown with a timestamp, e.g. 01.12.11 00:00. How can i change this to a simple date like 01.12.11? Please help. Thank you. Best regards Gunnar
-
Hi all, Apologies in advance if this has been discussed before or is covered elsewhere, but I was wondering, how can I include an image in a post?? TIA Blakey
-
can i help u? i had bought camfrog pro app by itunes...i see that app is upgrade now. but i can not upgrade that app...i can see this message "can not open by This id" i don't know why can not upgrade camfrog pro by my korea id? plz answer me
-
I'm nt particularly knowledgeable about the ins and outs of this program yet, so maybe this is just a setting I can't seem to find. Whenever I start up the program (Photoshop CS) the hand tool is selected. No matter what I try I can not select any ot
-
Change parameters's label in Viewer
I want to change the parameter's name that appear in the page in Viewer for the parameter's description. Is it possible?. Thanks.