How can I connect my macbook pro to printers on my windows wireless network, How can I connect my macbook pro to printers on my windows wireless network
My Macbook Pro running lion 10.7.2 is connected to my wifi network, which also has a PC, an hp photosmart and an hp laserjet connected to a server.
I have been able to set up printing from my mac to the photosmart by entering the ip address, although it can be tempremental.
The problem is that I cannot even find the HP Laserjet on the network at all and cannot link up to it to print.
Any ideas??
Look in the printer manual for instructions.
Similar Messages
-
I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.
Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing. -
My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?
Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?
The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
Everymac.com says:
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100. -
I would like to use my old Dell projection unit with my new Macbook Pro laptop, but obviously there is no such plug in the Macbook. Is there an adaptor I can connect and make it work? Without the old "F" keys, how do I get the Macbook to provide output to the projection unit? I don't see an icon on a button anywhere?
Thanks for any help... trying to become a good Apple user.
MarkTYou have to determine what connection options are available on the projector. You probably will need a Mini-displayport (Thunderbolt) adapter. that can accommodate the projector.
Ciao. -
Is there any way to connect my 2011 macbook pro to my PC laptop (Dell) so that I can get files off of the Mac? The display on the pro is out and I've got a black screen. The computer turns on. Actually it turned on one time after many tries and when I took it the Mac store the guy hit restart before I could stop him. I don't have another Mac to back up files to in restart 7 mode and I can't see my external hard drive to copy to when the computer has no display, so I am at a loss on how to get the files. I would like to get them before I send in for repairs. Any suggestions are appreciated.
The only other thing I can think of is to pull the drive out and hook it to another machine with a USB enclosure. Something like this:
http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_2?ie=UTF8&qid=1388312417&sr=8-2&keywords=2.5+enclosure
Then you could read it like an external USB drive. It's easy to open up and get the drive out. -
Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?
I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?
-
i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.
Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience. -
We have had to change to a new router but the Macbook Pro still reverts to the old one. How can we lose this and make the new router the default?
Go to "Network" under system preferences and choose "advanced"
On the Wi-Fi tab you can sort the sequence of the preferred connections.
Then just move your new router to the top of the list. -
MacBook Pro shuts down when I close lid. How can I prevent it?
MacBook Pro shuts down when I close lid. How can I prevent it?
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
I recently acquired an friend's used iMac, I don't know anything about networks and all I can find is how to create a Wi-Fi home network but nothing about hybrid Ethernet/Wi-Fi networks.
I have the iMac connected via Ethernet to the wireless router.
I connect via Airport with my MacBook Pro
I would appreciate if anyone has any pointers as to how I can start setting up a network between my ethernet-connected iMac and WiFi connected Macbook.
Thanks!ethernet and airport/WiFi are just transmission media for the same network. If you can get internet on both computers, they are networked. Using the same router = same network.
So now, what is it you want to do? Share files between them?
http://support.apple.com/kb/ht1549
http://gigaom.com/2008/09/26/mac-101-sharing-files-between-2-macs/
http://apple.stackexchange.com/questions/62450/how-to-share-files-between-two-ma cs-at-home -
How do I set up my new Macbook Pro to associate with my Apple ID so I can download purchased music?
Under 'Manage Devices' it only lists my iPhone and iMac. I've bought stuff on my new Macbook Pro using my Apple ID, but I can't find music I previously purchased using the iMac.Oh, wait, I've found it. Silly me!
-
I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help
I have eactly the same problem - it seems that the downloaded version on MBA is version 6.0 and on iPad is is version 2.0 -
Issue is when i tried to save the presentation on MBA Keynote 09 - Keynote crashed.
I tried to save is as Powerpoint in MBA and it crashed as well!
Message was edited by: Innovaxin -
My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?
There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
Hope that helps! -
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
-
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.
Maybe you are looking for
-
Creating and Saving My Own Midi Loops/Instrument
I know how to create a new instrument in GB but can I also create and save midi loops that are attached to the instrument and save them in the loop browser? The same way other midi parts work so when you drag the midi out of the loop browser and into
-
My HP Pavilion dv9700 will not power up. Lights blink on and off on a cycle, but screen is black.
-
lost iphone and itunes, cant get data back on new phone.
-
How to stream content to my old Toshiba 24AF41 CRT TC
Using the red & white cords & inputs, I can attach a WII to my old Toshiba TV (with my poor eyesight, this is all I need) and via my wireless network and the WII, I can access Netflix. However, I now have Amazon Prime and can stream other content to
-
IPod creates unwanted folders.
My songs on the computer have only one folder per artist. I want my iPod to show only one folder per artist. However, when I download my music to the iPod, multiple folders are created for each artist. I dont care what album the song came from, I wan