How can i connect my printer canon pixma mg7150

Hello,
I don't find the good driver for my printer CANON PIXMA MG7150, and i use a usb cable.
Is it good ?
Thanks

I have been setting up the same printer this week, with a USB cable  to my iMac. I have taken Mac printer drivers from the Canon site.   Here is a link that I used.
http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/ InkJet/PIXMA_MG_series/PIXMA_MG7150.aspx?type=download&softwaredetailid=tcm:14-1 091005&os=OS%20X%20v10.9&language=EN
Apple have notified that they have newly updated printer drivers for this printer, which you can download if you have the other drivers in place.
Hope this helps.

Similar Messages

  • Please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    please help me, How to connect my printer Canon pixma MP160 to my mac OS X Yosemite?

    You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

  • How can I connect my printer without air print

    How can I connect my printer without air print to my ipad mini?

    Maybe.
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Hello, i want to ask how can i set my printer canon mg2200 ? osx 10.9

    Hello, i want to ask about setting printer
    I use printer Canon Pixma MG2200
    How can i set the driver of my printer for my macbook pro with retina display
    thank you so much

    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg2220_w_pp_201#DriversAndSoftware

  • How can i connect the printer without a usb?

    I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.

    Have no idea, no model number of printer.   You can always buy a USB Printer cable. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How can i connect my printer to my computer without any chords

    Help me connect my printer to my laptop please

    You need to provide us at least what printer you have and what your other equipment consists of.
    Did you read your printer's manual for instructions on how to set it up?

  • I accidentally deleted bonjour and cannot connect my printer, how can I connect my printer?

    I accidentally deleted my Bonjour how can I hook up my printer??  Snow Leopard 10.6.8

    Since it is a preinstalled apps, you can not delete it. As Ann said, depending upon your phone and OS, you can disable it. Check in the apps drawer. If you can not find it there, go to Systems>Application Manager, then flip the top files to "all". Next flip down the list until you get to Google Play Store. Tap on it and you will see a key titled "Enable". Tap on this and it should return to normal. You probably will have to put it on a home screen, if you want to.

  • How can I connect a printer with my macbook using a wi-fi router?

    I've tried to connect my printer HP Photosmart 4680 (USB type) using my macbook or IPad using a D-Link wi-fi router and I wasn't successful. That problem didn't happened with my HP notebook...

    Follow the printer's wifi installation and setup intructions.

  • How can i connect a printer through PLSQL for taking printouts

    Hi,
    I want to take a printout of the specified file through PLSQL. Pls give u'r idea.
    Thanks
    Suresh

    Dear Suresh
    Can you please be specific about your doubt.
    What kind of file you want to take a printout. you mean to say any script file or the output of a select statement or something else.
    please state clearly what is your requirement
    Cheers
    Prakash Eranki

  • Router problems how can I connect direct

    I am continually having router problems from my service provider. How can i connect my printer directly to my computer? Thanks

    Hi,
    You need a printer which supports this first and then use the following instructions:
         http://www8.hp.com/au/en/campaigns/wireless-printing-center/wireless-direct.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3.  How can I get my scanner to work?

    I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1.  How can I get my scanner to work?

    Check here to see if there is an updated driver available for it:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

    Problems with Ipad and Canon printer PIxma Mg6250.
    MY Ipad2 (iOS 5.0.1) can't see the printer canon mg6250, connected on wi-fi, seen by my Pc. Someone could help me?

    You need to update the printer's firmware to 2.0.
    Go to http://www.canon.ie/Support/Consumer_Products/products/Fax__Multifunctionals/Ink Jet/PIXMA_MG_series/PIXMA_MG6250.aspx?type=download&page=1
    It is really hard to find what you need but it is at canon Ireland.

  • How can I configure a printer which is connected to a Windows PC

    How can I configure a printer which is connected to a Windows PC.
    I have a I-Mac with OSX lion ver 10.7.2 installed.
    The printer is a Canon IP4200.

    The first thing you need to ensure is that the printer is being shared by Windows. Hopefully you know how to do that but if not, reply with the version of Windows you are using.
    With the printer shared by Windows you then add the printer on the iMac by opening Print & Scan and clicking the plus button under the Printers list. With the Add Printer browser displayed you can select the Windows icon. A window appears showing three columns. The first column is for the workgroup name. You may already see a names here such as Workgroup or MSHome. Selecting the workgroup the Windows computer is using will then show the computer name. And selecting the computer name will show the shared printer, although you may need to enter your Windows user name and password to see this printer share. Select this printer share name will then let you select the printer driver to be used on the Mac. Note that you will not be able to use Canon's driver for this, as it is not designed to work with a shared printer from Windows. Instead you will need to download and install Gutenprint. This will provide you with another iP4200 printer in the Print Using menu and this version will let you print via the Windows share.
    If you don't see the workgroups on your local network or the computer name, or something else does not function as described above then please reply with details of what is not happening.

  • HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

    Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

Maybe you are looking for

  • Outputting to a text file.

    Hey guys and gals, Im doing a program for work that is a form you type in, select save and it stores the data to a file. I have 2 problems. FIRST i need to know how to change the font. SECOND how do i put in tabs, returns using out.write(...); The go

  • How do I update the colors on a 2d pie chart after adding 3 new variables

    I have added 3 additional items to a 2d pie chart.  Unfortunately, when the data is displayed the recently added items are displayed with the SAME colors as the first 3 items in the chart.  I need all variables to display in distinctly DIFFERENT colo

  • New routine

    hi, I need to write a new routine, Basic price + VAT *10% / 365 * no. of days in payment terms. Here value of no. of days is not picking up, field name is ZTERM. Any suggestions. vandana

  • The "save as" window keeps popping up randomingly while browsing, WHY?

    Literally every few minutes the pop-up asking to "save as" and it just keeps popping up to save the web page. There is nothing wrong with my ctrl and S button on my key board and I cannot figure out why the save as window keeps popping up. I've done

  • MAU Enhancement Guide Problem

    Hey, I´m trying to get acquainted with developing ME/MI applications. Therefore I have read some documentation around the whole system. Then I started with the MDK-Tutorial and made it until the end. But that tutorial is more for learning to create S