How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
http://support.epson.net/airprint/fw.html
Regards.

Similar Messages

  • How can I connect my ipad2 to a projector to show videos on a screen?

    How can I connect my ipad2 to a projector to show videos on a screen?

    http://store.apple.com/us/product/MC552ZM/B

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can i connect the PO to Document No...pls help it urgent!

    Hi gurus!
    How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
    Regards,
    Mackoy

    Hi,
    the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
    Tnx!
    Regards,
    Mackoy

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    check this post
    http://forums.ni.com/t5/Real-Time-Measurement-and/sensor-on-sbrio/m-p/2030424#M11812

  • How can I connect the first generation ipod to macbook air?

    How can I connect the first generation ipod to macbook air or macbook pro? Using an adapter?

    macbook air
    The only theoretical solution is an USB ExpressCard adapter and FireWire ExpressCard. I don't know if anyone's actually attempted it.
    macbook pro
    A FireWire 400 to 800 cable or adapter, also known as 6 pin to 9 pin.
    (53970)

  • HT4356 I  from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    I  am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    Make sure you have a AirPrint enabled printer.
    http://support.apple.com/kb/ht4356

  • How can I access the internet on my ipad mini while wifi signal is strong, how can I access the internet on my ipad mini while wifi signal is strong

    how can I access the internet on my ipad mini while wifi signal is strong,

    Your question isn't clear enough. If it's a strong signal, you're good to go.

  • How can I install gutenprint drivers for my Epson Stylus Color 440?

    Good day all!
    I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer.
    Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.
    A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.
    I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
    Thanks in advance for your help.

    How can I install gutenprint drivers for my Epson Stylus Color 440
    Download then isntall:  http://gimp-print.sourceforge.net/

  • How can I connect the remote server which is installed with oracle

    Now my computer is in my home,in my computer there is installed with the oracle 9i client,the server is also installed with oracle 9i,which is in my company.Now I want to use sql*plus to connect the database of the server through the internet work.I have created one listener service name in my home computer,but can't test successfully and the sql*plus can't connect the database.Who can tell me how to do it?Thank you!

    Technical questions need to be addressed to one of the technical forums-- Products | Database | Database - General in this case.
    Unless you are VPN-ing in or the DBA's at your company have configured Oracle Connection Manager to allow you to connect through the firewall to the database, however, I doubt this will work. If they have configured Connection Manager, you'll have to ask them to provide you with connection information. 99.9% of the time, you do not want people to access a database via the internet.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • How can I change the ipad2 backup location

    How can I change the local computer backup location for an iPad2 (iOS 5.0.1) to a folder I designate so it doesn't go through a specific user account (i.e.- If I create a folder directly on c: then point the backup there)?

    This previous discussion may be of interest: how do i change the file location of a backup on my computer

  • How can i connect the printer without a usb?

    I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.

    Have no idea, no model number of printer.   You can always buy a USB Printer cable. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for

  • IPod not displayed on desktop

    My iPod no longer pops up on the desktop when plugged in since I got the new iTunes 10. Help!

  • GW Migration

    Can I use the GW migration tool to migrate a GW 7.0.3 system to a Windows 2003 server? I'm reading that it is used to migrate to a Linux platform. If not, is there a utility to do so? Any advice is appreciated? Mike

  • Hide Region When Click On Region Name Then Region is Display

    Hi , I want to hide region click on REGION NAME like This Report [http://apex.oracle.com/pls/apex/f?p=267:4:1532929568077413|http://apex.oracle.com/pls/apex/f?p=267:4:1532929568077413] thanks

  • How to make a select list to return value to numeric column?

    I do have a select list with static values (STATIC:01;0,02;1,03;2,04;3,05;4,06;5,07;6,08;7,09;8,10;9). The problem is that I am returning a value to a numeric column. Therefore I have set 'Post Calculation Computation' as "to_number(:P73_MRGRATING, 9

  • Eos utility does not start

    Hello! I have installled EOS Utility, last version, on W7 64 bits. After install i double clik on the icon and nothing appens. Run as administrator does not help Event viewer shows nothing !!! Could you help ? Thanks