How can i connect the mac with internet key?

how can i connect the mac with internet key?
I try but it tolds me that I haven't the javaruntime...

I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

Similar Messages

  • How can I connect the mac pro with the TV

    My question is up there

    Somebody just answered that question with a nice little guide. The info is here:
                                      tv connection                    

  • How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    https://www.youtube.com/watch?v=72l_FLsXNAg
    I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
    also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
    Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • How can I get the MAC address of my Apple TV?

    How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
    (to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

    As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
    [http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
    I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

  • HT1544 how can I reinstall the Mac OS X from scratch?

    I have an early 2008 iMac that came with Mac OS X 10.5 leopard. I have bought all os's since then, and Today I am using the most recent one, mountain lion. My question is, how can I reinstall the Mac OS X from scratch? Is there a quick way ? Or do I have to:
    Find the leopard CDs that came with the iMac
    And go through the cd installation.
    Then, can I jump from leopard to mountain lion?

    If your goal is to just reinstall Mountain Lion, you can restart the computer holding the Command and R keys, then choose the reinstall OS X option from the utilities choices presented to you.
    That restarts the computer using the recovery hard drive that was created when you installed Mountain Lion...but note you must have an internet connection when you do this reinstall.

  • How can I use the gps without internet in my Ipad3 - 4G

    How can I use the gps without internet in my Ipad3 - 4G. Do I need to download any additional app than the one that already came with it?

    The Maps app included in iOS, at least as of the current version, requires an Internet connection, so you'll need to get an app that allows you to download maps to be kept on the iPad. MotionX GPS Drive is one such app, but there are others available.
    Regards.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • Can I connect two macs with thunder bolt ?

    can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
    thanks for any help

    You can connect the two.  Whether you can use VNC, I have no idea.
    http://store.apple.com/us/product/MC913ZM/A
    Ciao.

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can i do the RAC with Oracle 9i ?

    How can i do the RAC with Oracle 9i ?
    The Oracle 9i has a RAC(Real Application Cluster)module , please who can tell me how can i let it working .
    Which hardware the RAC need's
    Thank All ,
    [email protected]

    That is right you need atleast 2 boxes. The two servers will use the same hard disks.
    The concept is an extension of OPS(Oracle Parallel Server).
    Basically, you install Oracle Server Software on both the boxes, One database will be shared by both the servers. You can access your database through the Server1 or Server2. If Server1 fails then the Server2 will take over all the connections. You can add or remove any servers to and from the cluster any time you want with out impacting your production.
    They share load, reliable, scalable....

  • How can i connect my iPhone with my pc !! still my swipe is not working still my pc ask for accept device on iPhone

    how can i connect my iPhone with my pc !! still my swipe is not working but my pc ask to accept device on iPhone!!!!

    Now all my new apps as well as several others are gone from the iPhone.
    Look on other screens. The 4.1 update ands Game Center to the home screen. If that screen was full it create a blank screen and moves one app from the home screen to the new screen to make room for Game Center. All the other screens are pushed back one place.
    How can I get my apps back? It cost me a lot of time and money to discover those apps and get them onto the phone. Are they just gone now?
    If they are really gone, you can download them again. You will not be charged again if you use the same iTunes account.

  • HT4623 how can i connect my iphone with my pc

    how can i connect my iphone with my pc

    Use the USB Cable/Power Cord supplied with your phone. Attach the USB connecter to your pc. Open iTunes, if it doesn't automatically open, and select your device when it appears in the left-hand column.
    Cheers,
    GB

Maybe you are looking for

  • Connect a pc to my network?

    I have an imac G5 connected to the internet with an airport extreme and my new roommate has the misfortune to own a pc laptop running windows XP that she'd like to connect to my network. Basically I have been surfing for ages and looking in all the b

  • Satellite L750 turns on and off by itself using Linux

    Today I have experienced some strange behaviour on my notebook. It unexpectedly shuts down, after showing a dialog window saying "Your computer will shut down in 60 seconds". And then, when I turn it back on, it just shuts down before booting and it

  • How can I define the path to sync my I-pad (he does it by default on the c-drive)

    By default, the system  sync on c:...mobile sync/back up (created by the system itself). Have not enough memory on my C-drive and would like to back up on a D-drive or external HD. I tried via Edit/Preferences where I could indicate where to save the

  • Help - doesn't Arch support my computer anymore? [solved]

    I had a fine Arch Linux system running on my Laptop, until yesterday's package upgrade - which pulled in xf86-video-intel-2.10.0-1. For some reason, this new version of the intel video driver now requires kernel modesetting being enabled. This puts m

  • Converting a binary number to a list of integers

    I need to convert a binary number to a list of the values of the bit possitions that make up that number. I.e. 1 = 1; 3=2,1; 7=1,2,4. Does anyone know of Java API functions that could accomplish this, I couldn't find any, or a function that can do th