How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?
How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?
check this post
http://forums.ni.com/t5/Real-Time-Measurement-and/sensor-on-sbrio/m-p/2030424#M11812
Similar Messages
-
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?
Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret... -
How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. ThanksDoes the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
http://support.epson.net/airprint/fw.html
Regards. -
How can i connect the Faulhaber Motor to MID-7654?
How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
The Motor has following wires:
A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C: Hall sensor gray;
C: Phase yellow; +5V: Voltage red; GND: Ground black
The Encoder has:
5: Channel B; 4: Vcc; 3: Channel A; 2: Channel I (Zero impulse); 1: GND
I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !)
Thanks!
WLANUnfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly. -
How can i connect the PO to Document No...pls help it urgent!
Hi gurus!
How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
Regards,
MackoyHi,
the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
Tnx!
Regards,
Mackoy -
HT1212 how can i connect the iPad to the iTunes if the iPad is locked
how can i connect the iPad to the iTunes if the iPad is locked
If you can't do the restore then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht1808 -
How can i connect the mac with internet key?
how can i connect the mac with internet key?
I try but it tolds me that I haven't the javaruntime...I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou
-
How can I connect the first generation ipod to macbook air?
How can I connect the first generation ipod to macbook air or macbook pro? Using an adapter?
macbook air
The only theoretical solution is an USB ExpressCard adapter and FireWire ExpressCard. I don't know if anyone's actually attempted it.
macbook pro
A FireWire 400 to 800 cable or adapter, also known as 6 pin to 9 pin.
(53970) -
I am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!
Make sure you have a AirPrint enabled printer.
http://support.apple.com/kb/ht4356 -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class? These are the keys,values: TreeMap The data I'd like to Cache is (date from the file, time of the file, current time).
import java.io.*;
public class CacheData {
public static void main(String[] args) throws IOException {
String target_dir = "C:\\Files";
String output = "C:\\Files\output.txt";
File dir = new File(target_dir);
File[] files = dir.listFiles();
// open the Printwriter before your loop
PrintWriter outputStream = new PrintWriter(output);
for (File textfiles : files) {
if (textfiles.isFile() && textfiles.getName().endsWith(".txt")) {
BufferedReader inputStream = null;
// close the outputstream after the loop
outputStream.close();
try {
inputStream = new BufferedReader(new FileReader(textfiles));
String line;
while ((line = inputStream.readLine()) != null) {
System.out.println(line);
// Write Content
outputStream.println(line);
} finally {
if (inputStream != null) {
inputStream.close();How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class?
I don't understand your question.
If you don't know how to use TreeMap why do you think a TreeMap is the correct solution for what you want to do?
If you are just asking how to use TreeMap then there are PLENTY of tutorials on the internet and the Java API provides the methods that area available.
TreeMap (Java Platform SE 7 )
Are you sure you want a map and not a tree instead?
https://docs.oracle.com/javase/tutorial/uiswing/components/tree.html -
How can I connect the remote server which is installed with oracle
Now my computer is in my home,in my computer there is installed with the oracle 9i client,the server is also installed with oracle 9i,which is in my company.Now I want to use sql*plus to connect the database of the server through the internet work.I have created one listener service name in my home computer,but can't test successfully and the sql*plus can't connect the database.Who can tell me how to do it?Thank you!
Technical questions need to be addressed to one of the technical forums-- Products | Database | Database - General in this case.
Unless you are VPN-ing in or the DBA's at your company have configured Oracle Connection Manager to allow you to connect through the firewall to the database, however, I doubt this will work. If they have configured Connection Manager, you'll have to ask them to provide you with connection information. 99.9% of the time, you do not want people to access a database via the internet.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
How can i connect the printer without a usb?
I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.
Have no idea, no model number of printer. You can always buy a USB Printer cable.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
How can I connect the cFP-DIO-550 via a cFP-CB 1 with my circuit
hi
I use the module cFP-DIO-550 with a cFP-CB and I do not know how to connect my system with this module, for exemeple I want to connect the gate of a triac with the output 0 is that I need other electronic components or voltage sources.
thnx for helpThe cFP-DIO-550 can be set to I/O logic levels of 12 or 24V DC. What kind of voltages are you inputting/outputting? Check the specifications of this module to see if the connections you're making will be adequate.
-
I m using the 404A force transducer unit by Aurora Scientific and i want to connect the (converted to Volt) output, which is a BNC cable, to the PCI-6036E DAQ card via the SCB-68 connector block, facing difficulties in choosing the correct input mode for my signal(couldn t clear this using the manual), setting the switches and which channel shall i use in the block connector in order to configure ot with LABVIEW
Hi MSc Student,
Connecting your transducer to the 6036E card via the SCB-68 connector block should be pretty straight forward. You have 2 choices of input mode, Referenced Single Ended (RSE) this is where you will connect the screen of the BNC cable to a ground connection for the DAQ card in the SCB-68 and the other to any analogue input channel . These are listed in the device pinouts in the help section of MAX, under the 68 pin devices section. The terminal block numbers correspond to the DAQ card's pin numbers. Another method, which avoids ground loop problems would be to use the Differential connection and connect the signal and ground connections of the BNC cable to a differential analogue input, these are listed in the 6036E manual and in th
e MAX help section again. the disadvantage to using this method is 2 analogue input channels are used and you must use the lowest 8 analogue input channels for differential inputs.
The switch settings that you need can be found in the manual for the SCB-68 in table 2-1, the manual can be found here : http://www.ni.com/pdf/manuals/320745b.pdf
The switches are for power to extra signal conditioning and the cold junction compensation for thermocouples which in your case you do not need so set the switches to the positions in the first box ie Direct feedthrough, with temperature sensor disabled and accessory power disabled. The channel you use should not matter the only ting to remember will be that if you use differential mode measurement that you will be connecting the signals to AI(n) and AI(n+8) so differential input 0 is across the connectors for AI0 and AI(8). The channel numbers corespond to the analogue input number for the card.
I hope this information helps,
Chris M
App
lications Engineer, National Instruments
Maybe you are looking for
-
PY-IN: Mid Year Go Live without INLK schema
Hello, We are going for Mid-year PY-IN go-live; my customer doesn't have complete data for INLK run. However cumulative figures for the following items are available from the legacy system: 1. Salary as per provisions u/s 17(1) 2. Professional Tax 3.
-
so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went wh
-
White line appearing at top of screen on SD and some HD
I've noticed a white line appearing atop my broadcast watching SD and some HD channels. I know this line is part of the broadcast signal which is responsible for closed captioning or some other technical aspects. From what I've researched, a TV's ove
-
Where can I get the sample layout pages that were in the older CS Dreamweaver?
Where can I get the sample layout pages that were in the older CS Dreamweaver. You normally find them when you press "More" on the start screen and you see it on the "layout" section. On the CC version you only get 2 out of the 20 that you used to ge
-
Nikon NEF thumbnails and Lightroom
I am trying out Adobe Lightroom and the Nikon NEF files from my D70s are imported directly into Lightroom just as I had hoped they would be. However, I am flying blind when it comes to seeing the thumbnail previews of those same files "before" I do t