How can I connect the remote server which is installed with oracle

Now my computer is in my home,in my computer there is installed with the oracle 9i client,the server is also installed with oracle 9i,which is in my company.Now I want to use sql*plus to connect the database of the server through the internet work.I have created one listener service name in my home computer,but can't test successfully and the sql*plus can't connect the database.Who can tell me how to do it?Thank you!

Technical questions need to be addressed to one of the technical forums-- Products | Database | Database - General in this case.
Unless you are VPN-ing in or the DBA's at your company have configured Oracle Connection Manager to allow you to connect through the firewall to the database, however, I doubt this will work. If they have configured Connection Manager, you'll have to ask them to provide you with connection information. 99.9% of the time, you do not want people to access a database via the internet.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How can I change the directory in which I install oracle-xe-universal?

    Because I need to install it into my ssd which is mounted in the other directory.
    I know I can install the rpm package by relocate the root, but it won't work.
    Where I can just change the directory where to install the oracle-xe?
    Thanks a lot.
    Best rgds,
    Robin

    Kay,
    If you are looking at the entire music library ("Music") you can sort by any of the columns by clicking the column header.  If there is a column you can't see, enable it by going to View > View Options.
    Within a playlist, you can do the same, and in addition you can click above the column of sequence numbers, which will then allow you to drag tracks up or down to get any order you wish.

  • How can I run the C program which will interact with user

    hi, all
    I wanna run a C program whose function is that just show a line of characters, waiting for user input and finally show what user has entered. The C can run correctly in command window. But when I use Runtime class, it can not run correctly. My question is that how I can emulate that C program just by invoking Java method. The code I have written below, thank.
          String command = "cmd /c a.exe";  // a.exe is that C program
          String s;
          try {
             Process process = Runtime.getRuntime().exec(command);
             InputStream input = process.getInputStream();
             BufferedReader bufferedReader =
                new BufferedReader(new InputStreamReader(input));
             while((s = bufferedReader.readLine()) != null)
                  System.out.println(s);
          catch(IOException e) {
             System.err.println("IOException: " + e.getMessage());
          }

    http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Process.html#getOutputStream()

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    check this post
    http://forums.ni.com/t5/Real-Time-Measurement-and/sensor-on-sbrio/m-p/2030424#M11812

  • How can i solve the vpn server could not be found error on my iphone 5s?

    how can i solve the vpn server could not be found error on my iphone 5s?

    FWIW, back at work we have a Palo Alto Networks firewall and VPN. Have configured both the iPhone and the iPad with the pertinent details.
    If I connect while in the premises (same LAN), connection is instantaneous and flawless.
    If I connect while away, no matter which external network, the first attempt to connect ALWAYS fails with a NOT FOUND error. Yet if I try again immediately after, it ALWAYS connects with no further issues.

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can I connect to SQL Server CE?

    Hi!
    How can I connect to SQL Server CE ?
    Any idea?
    I found jdbc driver for SQL Server 6.5,7.0,2000.
    But no driver for SQL CE.
    Thanks for any suggestion....

    I am also searching for same answer.
    I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
    I am stuck in driver problem. I can't find that.
    Should I use Oracle Lite or PointBase?
    I am under a lot of stress... like you've been...
    I wish you find and post that....

  • How can we find the Idoc number which posts the material document in SAP

    Hi All,
    How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
    Thanks
    Chandru

    Hi,
    In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
    regards
    suresh

  • How can we change the purchasing group which it is maintained in R/3?

    Hello All.
    In case of MM, purchasing group is assigned to material master.
    It means purchasing group is maintained based on material code.
    But SRM has different maintenance level.
    As you know that purchasing group has the responsibility based on material group (Product category).
    So we should change the purchasing group from R/3, when end user create shopping cart.
    How can we change the purchasing group which it is maintained in material master?
    Thank you,
    Best regards,
    SH.

    Hello So Hee,
    I am not a technical guy.
    But for your requirement i am building a logic.
    I am not sure whether it will work.
    You need to check with your ABAPER.
    It is as below:
    When the SC is approved and the other configuration is correct ,
    PR is created in ECC by the virtue of BAPI.
    You want that the pur grp should be populated on the base of matl code and not on matl grp.
    Hence in SC you will not fill up pur grp.
    In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
    This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
    Now in the BAPI you need to incorporate this additional value of yr pur grp field.
    So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
    Again: this is all hypothesis.
    That's all I can help you.
    BR
    Dinesh
    <b>Reward if helps</b>

  • How can we capitalize the PR/PO, which are already booked in cost center?

    We are creating a capital Project for our department.  We have the structures ready and finalized with the budgets. But, the department has already done some commitments and expenditures in their cost center .Now, this expenditure and commitment values needs to be reflected in the report, so that correct values of assigned and available should be updated.
    1) Pls. suggest a process using which we can transfer this amount. Is this to be done by an FI entry or else we need to commit using sanction request?
    2) How can we capitalize the PR/PO, which are already booked in cost center?

    Hi,
    As we know the Contract is an Outline agreement for Quantity or Value for a particular Period with vendor.
    Without mentioning Plant also we can make contract for the Purchase organisation level for particular Material for the entire period
    Where as while creating PR  -it is an Indent for the material requiement for the specific Plant so when you refer Agreement inthe PR creation time System will ask you how much quantity to what plant you want to place indent. where as In PO  it ia an legal document so when you refer Agreement it will take all the details from Contract
    i think you are clear with my points
    With regrads
    Shrinivas gangoor
    Edited by: Shrinivas Gangoor on May 22, 2009 2:53 PM
    Edited by: Shrinivas Gangoor on May 22, 2009 2:54 PM

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • How can i connect the PO to Document No...pls help it urgent!

    Hi gurus!
    How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
    Regards,
    Mackoy

    Hi,
    the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
    Tnx!
    Regards,
    Mackoy

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

Maybe you are looking for

  • How do I make a word doc to PDF

    How do I make a work doc. to PDF

  • No sound through HDMI alternative solution

    If you are not able to get sound through your TV through HDMI and have tried all the System Preferences/Audio MIDI steps detailed on here in other threads but nothing works, try just shutting down all running apps. I had to Force Quit Spotify, Viber,

  • New region in a page

    Hi, I was trying to create a new region in a page. For that i create a region RG1 in Jdeveloper and in that page, i created FlexLayout and Flex Content using personalization. Before i extend the RG1 region in Flex Content i have imported the RG1 regi

  • Possible without servlets?

    Hi, I have a JSP which I am using to take care of the presentation side of my page. I then have some logic which I would like to seperate and put into a servlet. Is it possible to have the jsp load and display images and text etc, then transfer to th

  • Want to personalize a page using OA framework

    How to personalize a page using OA framework? How can I do the following? 1. How to add one more criteria in a drop down in a page and to run the query when we select that in the drop down? 2. How to change the oracle bill management logo in the top