How can I control external MIDI devices from my PXI Real-time system?

I am trying to implement a psychoacoustic experiment using an external MIDI device that can be used to shift the pitch of a speaker's voice.
I have a 8176 controller in a 1002 chasis with the 6052E IO card. I would very much prefer to run the system in real-time mode (rather than win XP), and need to control the MIDI device through one of the interfaces on the controller.
Any suggestions?
Thanks in advance,
Frenk

Hi Frenk,
one way would be an analogue to MIDI converter.
There are some out there (ask for music equipment)which can convert an analogue signal to some MIDI controller signal. This way you could control the pitch shift with an analogue output of the 6052 in realtime.
Hope this helps
Regards
Stephan

Similar Messages

Can I control external midi devices with Garageband?

hello
I would like to control my external effects unit ,a vox tonelab.
I want to be able to change patches at certain points in a track whilst recording .
Can I do this using midi ? if so how ?
regards
Paul

What I know this isn't implemented in GarageBand. To work with midi and synthesizer's you have to by Logic or other similar products. Hope they will make full midi aviable on next version of GarageBand. Midi In will work efficiently and smooth. I have try with my old Casio VZ-11.
Message was edited by: WoodDreamer

How can i remove an associated device from my iTunes account?

how can i remove an associated device from my iTunes account?

Hi..
See, "Removing an associated device or computer from an Apple ID" here > iTunes Store: Associating a device or computer to your Apple ID
Your iTunes account is the same as your Apple ID.

How can i remove the spell check from my iMac, i tried system pref but it still autocorrects

how can i remove the spell check from my iMac, i tried system pref but it still autocorrects

Look at the Spelling settings in the Edit menu of the app that is doing the correcting.

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

Well if you got the Phone Pggray43 at a Local Corporate store in your Area) you should be able to return it as long as you have all the contents.! Phone, Charger and any other accessories that came with it the Box of Course.. As long as you have not went past the 14 Day return.. the store can go over what you used as in Air Time and Data..
Now if you've went past the 14 Day return you be Liable to pay a E.T.F = Early Termination Fee the fee for this is around $300 so hopefully you have not went past the 14 Day return window the Manager if Available is the one I would talk to tell them your on Social Security and you just can't afford a phone as this I'm sure they'll work with you to get something solved..
Hope ya have Good Luck.! b33

How can I remove a Input device from my Mac?

Hello, I would like to know how I can remove a input device from the Sound area in System Preferences. I installed Wiretap Anywhere a sound input program for my Mac and did not realize It was not supported for Moutain Lion. I put the application in the trash and then emptied the trash can. Now whenever I try to start GarageBand or a program like that it crashes my computer. In the Input tab of Sound (System Preferences) It is listed as Wiretap: System Audio.
I would like to remove this from the Input tab so I can use my Mac reguarly. Any Ideas on how to fix it?
Thanks,
Justin

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

I lost my remote control,how can i control my apple tv from my ipad

How can i control my appletv from an ipad

Try. Apple's Remote App.
Remote on the App Store on iTunes

How can I control external devices using a touch screen with a standalone LabVIEW app

For my senior design project my group and I created a hybrid extended range vehicle with 90 Li+ Batteries thats charged by a 15 kW generator and/or that is also being charged by a 5 kW fuel cell. Currently, our system is capable of measuring voltages off of the batteries and displaying them on a laptop via LabVIEW. To process this data, we are using a cRIO FPGA. What we would like to do now is have a touch screen for the driver to choose what power source charges the batteries as well as monitor a pressure reading coming from the fuel cell tank.
What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls?
Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)?
Do I need an additional license for creating standalone applications and how would i go about creating a standalone app?
sorry for so many question. Any reply helps. Thanks!
Solved!
Go to Solution.

That sounds like a pretty interesting project. If you are interested, National Instruments hosts a Student Design Competition where you can win cash or a trip to Austin for NIWeek.
steve215 wrote:
What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls?
NI does sell Touch Panel computers that can be used to control LabVIEW applications. You can find more information here: HMIs and Industrial Touch Panels and here: LabVIEW Real-Time and Touch Panel Deployment and Replication Resources. Our 6-inch touch panel computers run Windows CE, so programming on them is a little different than programming on a full Windows OS. You may find the Getting Started with the LabVIEW Touch Panel Module useful.
You can use third party devices with the LabVIEW Touch Panel Module, although you will need a deployment license for it. More information can be found in the getting started guide.
If you were able to send the cRIO information over a network (which from your description sounds unlikely), you may be able to use a smartphone to control your application. More information can be found on our Community Smartphone Group.
steve215 wrote:
Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)?
If you were using the 6-inch touch panels, they require 18 to 32 VDC (the fuse becomes an open circuit if input level exceeds 33 VDC). The data transfer from the switching relays can be monitored and changed with the touch panel.
steve215 wrote:
Do I need an additional license for creating standalone applications and how would i go about creating a standalone app?
If you went the touch panel route, you would need to purchase the LabVIEW Touch Panel Module, and a touch panel. The NI touch panels come with a touch panel deployment license. Step-by-step guides for creating the standalone app can be found in the Getting Started with the LabVIEW Touch Panel Module guide.
Regards,
Elizabeth K.
National Instruments | Applications Engineer | www.ni.com/support

MainStage does not control external midi devices

in the Environment I can use the "External Instrument" object to be able to access external legacy devices such as synths and effects units. Since this capability already existed in the Environment, why wasn't it added to MainStage? I have seen this feature request on almost all "rack" type hosting systems such as NI Kore, and it seems to be a terrible oversight on the part of Apple. Can we supplement this by using MainStage objects in the Environment or somehow add this capability using Environment objects to bring this feature to MainStage?

well I think it should be a little more than just able to send program changes. It should also be able to access the continuous controller mapping through the MainStage layout, it should pass through all midi notes, etc. to the device and it should be able to act as a conduit for the midi clock / tempo features of MainStage. But yes, it doesn't appear to be that difficult to create; you know ... if Apple had thought of it, they could have actually used the External Instrument object which they discuss at great length in Chapter 10 "Working With Instruments and Effects".
Someone really didn't think this through ... this is fundamental.
P.S. I came across this AU plugin that was designed for GarageBand for the same purpose. Its missing a few things like the ability to send an initial program change and I am not sure if it can pass through midi control from another external controller such as guitar, keyboard, etc. I sent an email to the developer with suggestions. Its called MidiO:
http://mysite.verizon.net/retroware/
Message was edited by: msteveng

How can i delete an registered device from apple account.

Hallo
I registered 4 device to my itunes account sometime ago a got a virus in my network and i must re-install the operating System an all 4 devices....
So now my question..
How can i delete the now "not more available" devices from my apple/itunes account.
Sorry for my bad english if it is possible you can also answer in german or in simple english
thank you

If your system crashes or you reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. You can't deauthorise those dead installations individually. However once you've reached your limit of 5 you have the option to deauthorise them all in one go from your iTunes Store account and start over again. *Just note that you can only use this option once a year*: About iTunes Music Store Authorisation and Deauthorisation
To deauthorise all computers associated with your account:
1. Click iTunes Store in the Source pane.
2. If you're not signed in to the store, click the Account button, then enter your account name and password.
3. Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
4. In the Account Information window, click Deauthorize All.
See also this article: One computer using multiple iTunes Music Store authorizations

How can I call external web service from BPEL

1. I have "EmpService" webservice (simple webservice to get emp salary, not in BPEL domain) running in Oracle AS host1. If I want to call this web service from BPEL in another host2. How can I do this?
2. Is it a must to deploy this EmpService to Oracle BPEL domain in order to call it? If so, how can I deploy it. As many BPEL example tutorial demonstrate the "obant" command to deploy the BPEL process, but not show how to deploy a external web service not in BPEL project. Please help. ...

Create a partner link in BPEL and point it to the WSDL deployed on external server.
this thread will also help
Axis generated WS to Bpel WS

How can I control an iPad screen from a Mac

I have a friend who needs help using her iPad. She lives 1500 miles away. Is there any way I can control her iPad remotely from my iMac?

"Control" would be ideal, so I could take complete control of her iPad and then show her how to do things as if I was sitting there. Think "Remote Access".
But "Share" would be almost as good. At least then I could see her screen and be on the phone explaining what to do and watching her cursor movements.
The way we try to do it now is she holds up her iPad during an iChat (video) session, but the screen is too hard to see to be of any use, and helping her this way is virtually impossible.

How can i control the DAQ directly from VB

Actually, it is my first trial to use Visual Basic to get signal from DAQ.
And i don't how to interface them. I have read an article to use DataSocket.
However, it demostrated the OPC demo in OPC sever only, and so i didn't know
how to get the signal directly from DAQ card to monitor the real-time
signal.
Also, i have tried to build a .dll from my VI file which is used to monitor
the DAQ signal. However, the .dll file didn't have any return value or
argument, did it mean i can use this method?
And how can i interface the DAQ using VB?and my ADC model is AT-MIO-16E-2!
Thank you very much

Hi Sen,
Are you using Measurement Studio ? If so then you can use the DAQ activeX controls.
If not and you are using VB directly, then NI-Daq installs with examples for visual basic ( if you chose the option while installing- if not do a custom install and choose VB support). If so then you should find them under Program Files ->National Isntruments->NI-DAQ->Examples->VisualBasic. These may help you.
Essentially NI-DAQ ships with a .bas file that contains the "declares" for the NI-DAQ dll functions. These files should be in
Program Files ->National Isntruments->NI-DAQ->Includes (look for the .bas files) You can add these to your project to get access to the DAQ functions..
On the second question, do you mean you are using labVIEW to create your dll ? If this
is the case, then when you create your dll (in labVIEW's applciation builder) you have to set the parameters for the function (VI) and also the VI's return values. This will ensure that you can make use of your VI ..If you don't set a return value you really can't use it...Once you set the return value ,and create a dll, then you can use it like any other dll in Visual basic.
Hope this helps...
This link may help you
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/5052ad60f1accc3d862568a100717fd1?OpenDocument
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

How Can I Control a Windows PC from Apple Remote Desktop Please?

Hello Everybody
Please excuse my bad English.
I would like to ask you, how could be possibile setup windows pc (XP or 7) to be controlled by a Mac with Apple Remote Desktop 3.7.2
I think I have to use VNC, but how can i SETUP to connect XP or 7 to my Mac Apple Remote Desktop in the same LAN?
Thanks a lot
Giovanni

You can use ARD to remote control a windows machines, ARD is built on VNC
You'll have to install a VNC server on the windows machine you want to access
You won't be able to use most of the ARD features as they are specific to mac
You'll be be able to see and control the desktop and that's about it
You can also find VNC /Remote Desktop apps in the iOS store that will allow remote desktop connection from iPad /iPhone,
There is a mac version of Microsoft remote desktop in the Mac App Store

How can I control a base ACCESS from labview ?

Hi,
I'm working on a projet on labview and ACCESS and I want to say how can I do to control a database from labview ???
Thanks in advance
Cordially,
Hasna

On Tue, 9 Jul 2002 02:50:12 -0700 (PDT), kiki wrote:
>could you give me more informations about Database Connectivity
>Toolset ???
>
>I notice that we can write data in excel file thanks to an ActiveX but
>is it possible with a table ACCESS ??
DCT it's a suite of VIs (I think Optionals) the contains anything you
need to connect to to a DB.
I used them with access... since I'm not really happy with performance
(read/write max 50 records/sec) it's quite quick to develop
applications that read/write DB.
(Write a Cluster it's trivial.... plug the cluster, prepare a table
with fields of the same type and the same order, yo've did it)
I think you can also use ActiveX, but I've never did.

How can I control external MIDI devices from my PXI Real-time system?

Similar Messages

Maybe you are looking for