How can i control the motor movement of stepper motor using a NI PXI 7330

Good day to all,
i'm a newbie in programming in motion control of NI. I just want to ask if how can i control the clockwise and counter-clockwise rotation of a stepper motor using NI PXI 7330 module. all i can do is the counter-clockwise rotation using the example vi (Simple one-axis move.vi) found in the examples of LabView 2009.
Thanks

what type of limit switch sensor are you using and how did you wire itß What are your MAX settings regarding the limit switches?
Good day SIr Jochen,
I am using two reed switch for the reverse and forward limit. I wired the signal wire of the reed switch to the limit ports(forward and reverse Limit) and its ground to the digital ground of the UMI-7764.
the attachment below is the my max configuration about limit switches
Attachments:
max configuration.JPG ‏155 KB

Similar Messages

  • How can I control the order of iDVD menu items using the Arrow keys?

    I have a submenu screen containing 10 selectable buttons plus the Return Arrow button.  I have ordered all the slideshows in the correct order in the DVD map.  However, when I run the program, the arrow keys jump the selection focus in an apparently random sequence.  How can I control the order of the selection focus?
    I'm using iDVD v 7.1.2
    TIA.
    Ron

    Hi
    There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
    The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
    To my knowledge ther is no way around this.
    Yours Bengt W

  • How can I change the speed of a stepper motor?

    HSI bipolar Linear Actuator Size14, HSI Chopper Driver 40105, NI PCI-6052E, NI SC-2345, 2 SCC-DO01 modules, and SCC-FT01
    The motor works at one speed with a boolean array input, using the SCC-DO01.  But I need to be able to change the speed of the motor.  Specifically it needs to operate on several frequencies of functions of as displacement vs. time, such as sine wave, triangle wave, and square wave.  I tried to find information about using a digital pulse train but had no luck.  Is it even possible to accomplish with this hardware?
    Message Edited by Draben on 01-22-2006 09:43 PM

    In general E-Series DAQ-boards like the PCI-6052E are not very good for motion control tasks. The 6052E doesn't provide hardware timed digital I/Os so you can control the digital lines only by software. This is both slow and inaccurate as long as you are running the board under a non-deterministic OS like Windows.
    On a real-time OS the jitter would be better but still the frequency would be low and it would still be hard to program accurate acceleration and deceleration ramps.
    If you use the counter/timer instead of the digital I/Os you could reach higher velocities and a much better timing accuracy but it would be even harder to program acceleration/deceleration ramps which you will need if you want to reach higher velocities with your stepper motor. Additionally for motion control applications you may want features like limit switch monitoring and following error tracking which require again real-time capabilities.
    With this said I don't recommend the usage of a multifunction DAQ board as a motion control board. Please have a look at the NI motion control boards like the PCI-7332 which does all the motion I/O and trajectory control onboard.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • How can I control the FAQ title with CSS when using the Ajax effect

    I am calling the FAQ module with the Ajax effect.
    I would like to set different states with CSS to the title;
    I have tried to use :hover, :active and :focus on the div.
    It would be nice with a different styling when the item is "open"
    (I know there is a problem with the stacking, but I posted that in another thread)
    link

    Hi
    There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
    The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
    To my knowledge ther is no way around this.
    Yours Bengt W

  • How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

    How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

    There is not now, nor has there ever been a version of flash for any iOS device.
    Adobe has abandoned mobile flash, so there never will be.
    Browsers like iswifter or photon may work for you, but don't hold your breath.
    Check app store for an app of whatever game you want.

  • How can I control the zoom on my mac mouse?

    How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

    If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
    Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom".  It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

  • How can I control the size of a cell in the GridBagLayout?

    Hi,Swing Gurus
    I am developing a swing-based program using JBulider5 enterprise.
    It seems to me that the GridBagLayout is really a hard nut!
    How can I control the size of a cell in the GridBagLayout?
    It seems that I cann't control the size of a cell directly.
    But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
    Thx in advance!
    Regards,
    Justine

    hi,i have not done what you are asking but there are fields like
    COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

  • How can I control the order of playback on MuVu Mix (USB 2.

    What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
    Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
    I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
    By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

    SSR wrote:
    > on the newer MuVos (which I would have thought included the Mix)
    > it's filename order. Other than that it's hard to know, but it sounds
    > like you ought to contact Support to check.
    I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

  • How can I control the direction of  Panel Page  menuTabs (menu1) ?

    Hi all,
    in ADF FACES - JDeveloper 10.1.3
    how can I control the direction of Panel Page menuTabs (menu1) either from left to right or right to left ?
    regards,

    In the adf-faces-config.xml file you can add a right-to-left tag.
    (Right click on the structure window and choose insert inside...)

  • How can i control the timings of my slideshow using iphoto on my ipad

    Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
    Q: 2 then how can i export them?
    Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
    many thanks in anticipation of your collective help
    brian

    Here's my take on the same thing:
    Short answer: the dpi is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • How can I control the size of the af:InputText?

    Hi,
    How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
    Thanks,
    Rajesh.

    Hi,
    It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document id="d1" partialTriggers="it1">
    <af:messages id="m4"/>
    <af:form id="f1" partialTriggers="it1">
    <af:panelBox text="" id="pb1" background="dark" type="stretch"
    titleHalign="start" ramp="highlight"
    inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
    partialTriggers="it1">
    <af:spacer height="15pt" id="s1"/>
    <af:inputText id="ot1"
    columns="82" rows="25" wrap="hard"
    partialTriggers="it1"
    value="#{ChatClientBean.chatLog}"
    binding="#{ChatClientBean.outputChatTextBox}"
    visible="false">
    </af:inputText>
    <af:spacer height="27pt"/>
    <af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
    valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
    autoSubmit="true" partialTriggers="it1"
    binding="#{ChatClientBean.inputChatText}"/>
    </af:panelBox>
    </af:form>
    </af:document>
    </f:view>
    </jsp:root>
    Thanks,
    Rajesh.

  • Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

    Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • How can I control the list of cipher suites offered in the SSL Client Hello message? I want to forbid MD5 and RC4.

    How can I control the list of cipher suites offered in the SSL Client Hello message?
    I want to limit my browser to negotiating strong cipher suites. I'd like to forbid DES, MD5 and RC4.

    Set the related SSL3 prefs to false on the about:config page (Filter: security.ssl3.).
    *http://kb.mozillazine.org/about:config

  • How can I control the Product Category in the Pre-select screen

    Dear ,my expert :
       I  work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they  filled the data in the  registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
      So ,my question is :
       1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the   Product Category A in the Pre-select screen .
       2,You know the supplier select two category  is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
       SO ,in my case ,any one has the suggestions ,any link welcome .
       Bestregards
      alex

    Hi Alex,
    As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
    What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
    Regards,
    Nikhil

  • How can I control the workflow in the award the Rfx response

    HI,Experts :
       I work in SRM 7.0 ,RFx scenario .
      In  my case ,the supplier submit his RFX response according the RFX ,and the purchaser awards this response .
    There are  3 steps workflow for one type RFX response,and 4 steps workflow for another RFX Response .So ,I know I just can use the standard transaction type for the RFX Response .SO ,How can I  control the workflow in this case .
      Bestregards
      Alex

    Hi,
      If i understand your question correcly,   you have to determine the  process schema definition dynamically based on the transaction type.. then you can configure the process level ( 3 or 4 ) based the process schema definition..
    Saravanan

Maybe you are looking for