How can I convert a coaxial internet feed to an ethernet for connection to an AirPort Extreme?

I'm interested in purchasing an AirPort Extreme but I'm not sure how to convert the coaxial internet cable to ethernet to connect to the airport. Does anybody know of a good converter?

If the Internet feed is provided by your Internet Service Provider (ISP) you will need an outboard cable modem that accepts the coaxial signal and converts it to Ethernet for use with the AirPort Extreme.
Contact your Internet Service Provider to learn what modem they recommend for use with their service.

Similar Messages

  • How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

    How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

    Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials.  And I say this because it's what I would do, there are a lot of tutorials online.    Hope you can find good use for them.  Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy.  I've re-purposed a mac color classic and LOVE IT!!

  • How can you convert a PDF File into a picture format for uploading?

    How can you convert a PDF File into a picture format for uploading?

    If you have Acrobat 11, you'd select: File > Save As Other > Image
    and select one of the available image formats.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How can I convert iWeb page to html with NO javascript for email campaign?

    I have a holiday greeting I made in iWeb '09 for my business. The service I'm using to use to manage my mailing list wants me to strip all javascript code from the page so it is not seen as spam when it is emailed.
    How can I convert the page made in iWeb to an html page with no javascript?
    Thanks

    How can I convert the page made in iWeb to an html page with no javascript?
    You cannot. There will be nothing left. iWeb pages rely a lot on JavaScript.
    Use a template from Mail.app. Or create such template. These are simple TABLES and have no JavaScript in it.
    Do Cmd-Shift-G in the finder and type :
    /Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/
    Open one of the folders and open each successive folder until you see files like Picnic.mailstationery.
    Right-click to show the package content.
    Then navigate thru Contents, Resources until you see the files and images you need.
    Edit them to your hearts content.
    Double-click the file Picnic.mailstationery and it will open in Mail.app for further processing.

  • HT201250 Can I use Time Machine to backup a LaCie Hard Drive connected to an Airport Extreme onto a My Book that is connected directly to a Mac Mini?

    I have a LaCie 2TB hard drive connected to a Airport Extreme Base Station.  I also have a 1TB MyBook connected to a Mac Mini.  My question is can you backup selected files (photos) from the LaCie drive to the MyBook drive using Time Machine, or any other software?  If it will cost a fortune, I guess I can always just copy the newer files over.

    Thank you for such a lightning-fast response Niel :-)  Can I just double check with you the following ...?
    The external drive where my iPhoto library is located has three partitions - Time Machine Backup, Pictures (where the iPhoto library is located) and SuperDuper Bootable Clone.
    When you say 'Remove the external drive from the list of items set to be excluded from the backup, and then add everything else on it' - am I correct in thinking that I should remove Pictures partition from the items to be excluded but leave the Time Machine Backup and SuperDuper Bootable Clone as excluded items?
    On my 2TB external drive (the one I'm backing up to) there are 5 partitions - Time Machine Backup, SuperDuper Clone, Pictures, Photo Archive and Document Archive.  The Time Machine Backup is 700GB of which I still have 473GB available - when I include the Pictures folder that contains the iPhoto library that will use up another 148GB but I think there's still plenty of room to use it.
    When you say if the partition contain the iPhoto library isn't dedicated to it it may be easier to create one which is, the only item I have on the Pictures volume is the iPhoto library so I think that it's dedicated to it.  I was going to add images from the Pictures folder on my MacBook Pro but haven't done so at this stage so I won't do so.  It wouldn't matter though, would it, if I copied the images from the Pictures folder on my MBP to the 'Photo Archive' partition of the EHD?
    Thank you once more for your reply.
    Tricia

  • How do i change the Nat type 3 to type 2 for my Ps3 on Airport Extreme?

    I have search the internet trying to find ways to do this but nothing has helped. Some people tell me to airport utility and then to internet and then to NAT. But, no NAT tab shows up for me. I'm trying to change it from NAT 3 to 2 so it can work better with my PS3. Thank you.

    Is your AirPort Extreme the only router in your current network configuration? That is, is it connected directly to an Internet broadband modem and not another router? If so, the following is how you would configure the Extreme for Port Mapping:
    1. Reserve a DHCP-provided IP address for the PS3.
    Internet > DHCP tab
    On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    Click Continue.
    MAC Address: <enter the MAC hardware address of the PS3>
    IPv4 Address: <enter the desired IP address>
    Click Done.
    2. Setup Port Mapping on the AXn.
    Advanced > Port Mapping tab
    Click the "+" (Add) button
    Service: <choose the appropriate service from the Service pop-up menu>
    Public UDP Port(s): <enter the appropriate UDP port values>
    Public TCP Port(s): <enter the appropriate TCP port values>
    Private IP Address: <enter the IP address of the PS3>
    Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    Click "Continue"

  • Help - how can I convert G5's SATA power to 4-pin for an Ultra SCSI?

    I am trying to put an Ultra SCSI hard drive in an G5. For *some reason* this is very, very hard to do. I have bought a compatible ATTO PCI card that is working fine in the slot. I can connect the data cable from the SCSI card to the drive installed in the G5 (although it was hard snaking it through). The problem is power. What I need is an adapter that will convert the end of the SATA power connector into a 4 pin female for the drive side. This product (http://eshop.macsales.com/item/Micro%20Accessories/SATAPA/
    ) looks right, but seems to be the wrong sex -- the 4 pin part is certainly the wrong sex (since the drive is male, the adapter must be female), and I can't tell if the SATA part will fit (looks like it's also the wrong sex). The picture of what I am trying to do is here:
    http://flickr.com/photos/ppayne/159005320/
    Can you please help me here? I can't believe that people using a special (high performance in my case) drive with a g5 is something no one has ever tried to do. I know SATA is the future but I want to use my special hard drive (15,000 rpm Ultra SCSI) with my server.
    So once again, I am looking for an adapter that will be male SATA power on one end, and female 4 pin on the other end. If anyone could help that would be great.

    Like Timotheus D said, don't over think it, get a y-splitter to go off the power for your super drive, like: http://www.directron.com/cbl-y.html

  • How to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

    Is it possible to lock a specific files on a shared network usb drive connected to an airport extreme on a mac running lion?

    Here is one from Pondini, who was the foremost Time Machine expert in the world.
    http://pondini.org/TM/Airport.html
    And another from Apple. Info near the bottom.
    AirPort base stations: About USB disks
    And another miscellaneous from Apple:
    AirPort base stations: Time Machine hard drive compatibility

  • How can I access my HD files connected to my airport extreme thru my iPhone?

    How can I access the files stored on my HD that is connected to my airport extreme thru my iPhone?

    You might want to check out Filebrowser. More info here:
    http://www.stratospherix.com/products/filebrowser/

  • TS1859 I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

    I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

    hi
    download perian from internet, it'll solve your issue.

  • How can I convert a Microsoft Publisher document to PDF format. I have free version of Acrobat.

    How can I convert a Microsoft Publisher document to PDF format. I have free version of Acrobat.

    Hi raythree,
    I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
    Clear your browser cache (steps to do this vary by browser).
    If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
    Try another web browser.  A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
    Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
    I hope this helps. But let us know if you need further assistance.
    Best,
    Sara

  • How can I convert an int to a string?

    Hi
    How can I convert an int to a string?
    /ad87geao

    Here is some the code:
    public class GUI
        extends Applet {
      public GUI() { 
        lastValue = 5;
        String temp = Integer.toString(lastValue);
        System.out.println(temp);
        showText(temp);
      private void showText(final String text) {
        SwingUtilities.invokeLater(new Runnable() {
          public void run() {
            tArea2.setText(text + "\n");
    }

  • How can I convert an InputStream to a FileInputStream ???

    How can I convert an InputStream to a FileInputStream ???

    Thanks for you reply, however, I am still stuck.
    I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
    private void loadConfig() {
    String fileName = "resources/groupconfig";
    File name = new File(fileName);
    if(name.isFile()) {
    try {
         ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
         pAndGConfig = (PAGroupsConfig)in.readObject();
         in.close();
         return;
    } catch(ClassNotFoundException e) {
         System.err.println("++ERROR: "+e);
    } catch(IOException e) {
         System.err.println("++ERROR: "+e);
    System.out.println("Can't find file: " + fileName);
    Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
    InputStream is = this.getClass().getResourceAsStream(fileName);
    I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
    I would be very grateful if you could help shed some light on the matter - Cobram

  • How can I convert an OVM vm (.img) to VDI (virtualbox)?

    Hi,
    how can I convert an OVM vm (.img) to VDI (virtualbox)?
    Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
    tnx & regards,
    S.

    Hi,
    "VBoxManage convertdd" solved.
    Regards,
    S.

Maybe you are looking for