How can I convert multiple hidden files into normal files at once?

I have a folder with a few hundred hidden files that I no longer want hidden. If I were to change each file separately it would take hours to finish. I was hoping that there was some way to convert all of these files at once with the terminal. Can anyone offer a solution? Thanks.

Can anyone help?

Similar Messages

How can I Convert Multiple Music tracks into one track or file

I Have Mix Cd's with multiple tracks on them,,,,,,,,I am trying to Convert these tracks into one Track,,,,,,is this process possible thru Itunes or do I need to buy a software for this,,,,,,I see there is a Join Cd Tracks button but it is not highlighted for me to select it,,,,,,,,PLEASE HELP,,,,,,THANKS

Can anyone help?

How can I convert multiple files at one time and not one at a time

How can I convert multiple files at one time and not one at a time

Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can i scan multiple pages in a single file in pdf.

How can i scan multiple pages in a single file in pdf using 1536 dnf.

Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can I convert a mp3 to a text file?

How can I convert a mp3 to a text file?

Agree with dwb
.. and wanted to say hi from my Schnauzer....

How can I convert a Word document into Adobe PDF format?

How can I convert a Word document into Adobe PDF format?

You can use Adobe Acrobat or Adobe CreatePDF.

How can I delete multiple emails on my Samsung Stratosphere at once?

How can I delete multiple emails on my Samsung Stratosphere at once? I use AOL and when I delete the emails off of my computer, they do not delete from my phone. So I have hundreds of unwanted messages showing on my phone but I have not found an option to delete all messages, only individually. I would also like to be able to clear the messages from my phone without them deleting from my computer. This was super easy with my blackberry and I have not found anything similar on this phone.

When I go to the trash folder on my Stratosphere, I can check individual emails and then hit "Menu" and "Delete", but if I hit the "Menu" button before selecting any e-mails, then I see the "Delete all" button, but it's greyed out, so I cannot select it. There's also a "Restore All" button next to the "Delete all" button, and it's also greyed out. So, currently the only way I can delete the 100's of e-mails in my trash is to put a check mark next to each one, which is painful. Anybody else have this problem or know of a solution?

How can I convert a Slideshow to an .m4v file?

I am trying to convert a slideshow, with audio, created with iDVD to a movie file to transfer into iMovie to be able to post on iWeb. How can I convert to an .m4v file?

You'll have to rip the iDVD disk that you burned with HandBreak or similar app and then import the resulting movie file into iMovie.
OT

How can I send multiple string commands into a VISA write?

Hi Fellow LabVIEW users
I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
How can I send multiple string commands to a VISA write. For example each string command looks like this
1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
and so on and so forth. And there are a number of scenarios.
Each String scenario will give a different string output which will be interpreted differently in the front panel.
Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
Thanks, any feedback will help.
mhaque

Please stick to your original post.

How can i convert this data(00000000) into date format(yyyy-MM-dd)

Hi,
i am using this method to convert date format from string.
public static string FormatDate(string inputDate, string inputFormat)
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
string datepresent = DateTime.Now.Date.ToString("yyyy-MM-dd");
return datepresent;
its working properly,
but when input data is like 00000000 i am getting error this is not valid.
how can i convert this into date format any help..!

Have you tried the above code:
I can see it is working with both Date and DateTime destination nodes.
Map:
Functoid Parameters:
Functoid Script:
public static string FormatDate(string inputDate, string inputFormat)
string datepresent;
if (inputDate == "00000000")
datepresent = "0000-00-00";
else
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
datepresent = date.ToString("yyyy-MM-dd");
return datepresent;
Input:
<ns0:InputDateString xmlns:ns0="http://DateFormat.SourceSchema">
<DateString>00000000</DateString>
</ns0:InputDateString>
Output:
<ns0:OutputDate xmlns:ns0="http://DateFormat.DestinationSchema">
<Date>0000-00-00</Date>
</ns0:OutputDate>
If this answers your question please mark as answer. If this post is helpful, please vote as helpful.

How can we create a ABAP object into .ptr file

HI,
How can we create a ABAP object into .ptr/.car/.sar format so that we can give it to a remote client and which can be imported into their R/3 system to get the functionality of this object.

Hello Ramesh
All you need is SAPLINK. Have a look at the following links:
<a href="/people/ed.herrmann/blog/2005/11/14/the-enterprise-and-the-bazaar Enterprise and the Bazaar</a>
<a href="https://sourceforge.net/projects/saplink/">SAPLINK</a>
Regards
Uwe

How Can I Convert Multiple TextEdit Files Into A Single Giant File?

For example. I have multiple chapters for my new book each saved as individual files, and I want to combine all the chapters into one single continual file that I can work with in either Text Edit or Word. How can I do this? It's hundreds of files... ∆
Thanks!

Hi Bruce, Tex-Edit Plus for OS X...
http://www.tex-edit.com/
It can Merge files then Sort them easily, even has a remove duplicate lines script available.
If the version you get doesn't have the sort perchance, here's a link, put sort in the search scripts box, get the second one, Sort Selection...
http://dougscripts.com/texedit/

How can I print a LabView-Blockdiagram into a file?

Hello,
I'd like to print a Blockdiagram into a file to insert it into a
Word-Document. How can I do this best? (I don't need a function that
does it automatically for me in LabView!)
Thanks!

RMy wrote:
> I prefer to make a screen dump (Alt+PrintScrn) and paste picture into
> my document. Alternative: Print to a .rtf-file. Problem is with large
> blockdiagrams that doesnt fit into one page. Solutions?
Maybe installing a hpgl-driver and print to a file.
Download the hpgl-graphics filter from microsoft (was included until
Office 95 i think) and import it to the word-document.
You'll lose the colors this way (as far as i remember).
Use a postscript printerdriver to print to a file. Convert it to
something, you can import to your application.
Use a pdf-printerdriver. But I don't know how you can import graphics
from pdf (a subset of postscript) to other applications.
Print to PostScript-File, use ImageMagick's "convert" program to conver
t
it to something userful for you and import it.
These are my ideas...
bye
Marco

How can I convert multiple hidden files into normal files at once?

Similar Messages

Maybe you are looking for