How can I count time with labview7?

Hi
How can I count time with labview 7 and NI-DAQmx like I did with labview 6.1 and "count time-easy.vi" (count event or Time.vi).
I have a 6025E and labview 7.0
Thanks

I am not sure what you want to do or why..
... but here goes (some suggestions)
If you want to count the time between two events, you have a choice, you may use the Tick Count. Inisitalize it first by getting a timestamp and then do a difference within a loop. The difference will give you the time elapsed in ms.
You can also use the Get Date/Time String or Get Date / Time in seconds and once again take a snapshot when a first even occurs and another snapshot at the next even (at a point where you want to measure elasped time). This method is particularly useful if you want to timestamp an event.
If I didn't answer your question, can you elaborate what you mean by "How can I count time".
Best of luck..
JLV

Similar Messages

How can I count time that a computer has been connectted with the internet

I want to count the time which a computer has been connectted with the internet?
I had already tried several times,
one is socket,
second is Runtime.exec("ping -n 1"+ip)
I don't think they are better;
do you have another idea?

The internet is a conceptual entity not a physical entity so you are never connected to it.
As a conceptual entity the internet is represented by a cloud of computing devices (computers, gateways, routers, etc.)
Your computer connects to a another computer by being routed through various devices and then finally connecting to that remote computer.
Depending on various thing you can measure the time that you can connect to other devices by either pinging a common IP in the internet (such as yahoo.com) or by pinging the router that that represents the entry point for your cloud (such as the router/gateway of your ISP.)
If you are concerned about a particular connection, such a specific remote computer, then using a socket and sending a 'keep-alive' message and recieving the response is the best way to track that.

How can I add Time In Calendar

How Can I add Time With Calendar In apps

Please refer to "Oracle Applications Developer's Guide" manual.
Applications Releases 11i and 12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

How can I count events during a given time with 2 counters (6025 E)

Hi, How can I count events during a given time (1 sec for example) with 2 counters:
what is the best way?
how should i configurate both counter?
i have done the 1st counter in ev_counter with the gate being the output of the 2nd; and how can i say to the 2nd to trig the first after 1 sec counting? (trig at start and at end) what are the functoins calls in NIDAQ. i am using Visual C++

Greetings,
When you perform event counting a gate signal can be added such that if a low signal occurs on the gate, then the counter will pause. When a high signal is seen, the counter will continue counting edges. When you install the NI-DAQ driver you should have installed the examples for Visual C++. The counter examples are found in \Program Files\National Instruments\NI-DAQ\Examples\VisualC\Ctr. Take a look at STCeventCount.C. Be sure to only use STC examples with your hardware. The E-series boards contain the DAQ-STC chip.
Now, all you need is a gate signal with a width (high time) of 1 second. You could use an external frequency or pulse generator to do this. Or, you could just use the second counter found on your PCI-6025E board. In this
case you could configure the second counter to generate a single pulse. Take a look at the STCgenerateSinglePulse.C example. As long as the pulse is in a high state for one second you can use it to gate (or time) your counting of events.
Regards,
Justin Britten
Applications Engineer
National Instruments

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

How can i use time machine with a network drive

I have a Western Digital Net N900 wireless router with a 2TB internal H/D. How can I get Time Machine to reconize it?

Relying only on TM to me is iffy but I would bet you have clones in addition to TM like I do. I agree with everything you said but to the OP question, it is possible. A time capsule or AEBS+HD are pretty similar but one is officially supported while the later is not.
Since I'm rambling a bit I will add this. I only use TM for the times I delete something and then wish I had it back. All my restores or migrations are done from my clones. One clone is made weekly and is a snap shot of my system. One clone I keep remotely located and is updated monthly.
My system:
Internal 1TB
Ext HD1 2TB (1TB data, 1TB clone)
Ext HD2 2TB time machine backup (internal + HD1 data, not the clone)
Remote 1TB clone
I'm fully redudant with my method and it has saved me before.

How can I change Time data with List Entry Screen ?

Hi expert.
I transfer Time Data (Infotype 2003) via CAT6.
When I go to transaction PA61 and click List Entry icon.
Record is display and cannot change data.
If I wanna change data.I must to click Choose Icon one by one record.
How can I change data with List Entry Screen?
ps. If record create via PA61. I can change data with List Entry Screen.
I can't change with record that create via CAT6.
Best Regards.

have u tried to change your time entry through CAT2 tcode, ithink if u have created profile for time entry then it should allow you to change and you can use esc otherwise, its generally the standard profile given by SAP. but is 4 one user
hope this helps
guds

HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

- The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
- What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

Before downloading lion, i want to backup my computer with time machine and a G-DRIVE Slim. But how can i use time machine to only backup my system once?

Just wondering, how can i use time machine to only backup my system once? Just this once and not on a weekly basis?

Upgrade. My three year old Mac Pro and year old MacBook Pro have no problem. Both seem faster.
And there's your problem reading entirely subjective views on forums, from people that might or might not have decently maintained systems, good operating practices, or whatever....
Strangely, when most companies issue new software, it is because they believe (and believe they have checked) that it is better than the previous version.

My iTunes library is missing since upgrade Lion 7.2. I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

hi Limnos,
I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th. (90% of the media is missing, along with all playlists) The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29. (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
I have my iTunes folder backed up on both an external drive as well as Time Machine.
I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up.
Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
Thank you for your help!
Deb

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

How can I file share with another person if both of us are using Mac operating systems? Do we need to use a third party file sharing system or does apple have this capability?

How can I file share with another personif both of us are using Mac operating systems (one of us using a Mac laptop and the other using iMac). Our intention is to have a working document that can be changed by both parties over time and both parties will have visibility to the others changes.

Use SugarSync

How can I earn money with my iPhone application?

Hello everybody!
I am a beginner iPhone applications developer and I would like to know how can I earn money with applications that I created?
Thanks a lot!!
John

Basically, Navizon adds to the basic location services of your iPhone. Your handset can determine your location using a combination of cell towers, Wi-Fi, and GPS, but using the included Maps application, you have no way of knowing which is active at any given time. Navizon displays your position (on Yahoo!, rather than Google Maps), but it also displays a little badge to let you know which method is being used to determine where you are. That way I know, for example, why the map was showing me as located three blocks North of where I actually am. The answer? My phone was only using cell tower data to find me. You can also take advantage of built-in buddy features to locate friends or family, if they’re using Navizon’s service. You can also configure alerts by logging on to the website to receive notifications by email or web when your buddies enter into specific areas you designate. The most interesting feature of the app, one that I hinted at earlier, is how you can receive cash rewards for using it. In order to continue to build out their extensive database of cell and Wi-Fi towers, Navizon is offering a rewards system similar to air miles, but without the free flights. Instead, compensation is based on accumulating enough points. Also, in this case, it’s actually the number of towers, not the number of miles you’re being rewarded for. For first-time finds, you get 15 points for every cell tower mapped, and 3 for every Wi-Fi access point. If they’ve already been found before, you get 2 for every cell tower and 1 for every access point. Once you’ve accumulated 10,000, Navizon will wire $10 to your bank account.
No, you can’t retire on that kind of money, but if you’re already using your phone to log trails or track your pals, it pays more than the competition, at least. You can get the Lite version [iTunes] in the App Store for free, while the full version [iTunes] costs $9.99. 10,000 points and it pays for itself!

I have I pad and IPhone my daughter had iPad how can I video chat with her

I have a iPhone I gave my daughter my iPad how can I video chat with her?

Next time before having to pay this regular Microsoft tax, include your iTunes library with your computer's backup per the instructions included with this link.
http://support.apple.com/kb/HT1751
iTunes includes an option to transfer iTunes content that was purchased/downloaded from the iTunes store from an iPod, iPad, or iPhone, but this is for iTunes content that was purchased/downloaded from the iTunes store only.
First you need to re-authorize your computer with your iTunes account with iTunes if you haven't already done so. With your iPad connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPad.

How can I get help with pending songs that have taken over 12 hours to fully download?

How can I get help with pending songs that have taken over 12 hours to fully download?

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

How can I count time with labview7?

Similar Messages

Maybe you are looking for