How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.
How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.
Try calling 1-800-676-2775. Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk). *May* is only because they may not burn disks for Leopard anymore.
If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
Have you considered Snow Leopard?. Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.
Similar Messages
-
* running windows vista home
* firefox 4I contacted them and they said its not on their end at all.
-
My daughter has previously had an ipod which was linked to my itunes iphone account.
she now has a new iphone and has linked this to that account and now she receives all my contacts apps etc when she syncs her account.
How do i create a new itunes account for my old iphone so that i can transfer data to my new iphone and keep the two seperate so that when she deletes all my contacts and apps and then syncs her phone again we can still be compatible.iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
-
MacBook Pro
17-inch: 2.16GHz Intel Core Duo running on OS X 10.6.8, can I update to Lion or Mtn Lion? thanks ed cA Core Duo(not Core 2 Duo) can't be upgraded past 10.6.8.
(73883) -
Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2)? I can't upgrade from 10.6.8 to 10.7 without a Core 2.
Lion (10.7.x) needs Core2Duo.
-
I have a Mac 2 GHz Intel Core Duo running OS X 10.6.8. Can I upgrade to 10.7 on this Mac?
no, you need an intel core 2 duo or higher: http://support.apple.com/kb/sp629
-
The issue is, I teach photography and just downloaded Lightroom 4.
Well, LR4 won't run on the older OS. So, before I try to download Mountain Lion, I need to know if it will work on this computer or is it simply too old.
ThanksOS X Lion and Mountain Lion are 64-bit operating systems, and the Intel Core Duo is a 32-bit processor, so you can't use Lion and Mountain Lion on your computer. Mac OS X Snow Leopard is the most recent version for your computer.
As I can see, you are running Mac OS X Leopard, so buy Snow Leopard. Then, make a backup of your data, insert the DVD and upgrade OS X. When the upgrade finishes, open > Software Update to update to the most recent version, so you will be using 10.6.8 -
In the last few days, it seems that my computer has all of a sudden caught a virus. I have never had that happened to a computer, but I have surely heard about it. I can't think of any other reason it is behaving like this. I know that Macs have been pretty much impervious to viruses, but that was before they were the majority of users.
Anyway, what is happening is, my computer keeps crashing whenever I try to open a program, app, document, folder, file, etc. I tried to boot from Drive Genius to establish the problem, but Drive Genius crashed too. I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
Before I go there I was hoping someone in the community would have a suggestion to help me avoid that ultimate last resort. The tech support guy at Drive Genius told me that probably would have to be the way to go (as in reboot) and if that doesn't clear it up, it's repair time.
Thank you for your consideration in advance;
Lorain RIn the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details. -
Cisco Any Connect: Works fine but can't download file
Hello! Here's my question:
I search for documents in a database over a remote vpn using Cisco Any Connect. Works fine. I receive a result, a list of documents that meet my criteria. I can either export to my PC or open. If I try to export, I get a prompt asking where I would like to place the file. I select the place (my desktop) and the window hangs after about 10% on the progress bar. If I try to open the document, a window opens but hangs.
Is there any way to resolve this, is the problem on my end of the remote vpn? Is this an Any Connect issue?
FYI: I am using IE8. I am using a Microsoft Windows Essentials firewall. (I was using Norton before this, same issue.) I have also tried “Display All Websites in Compability View” option in IE but no difference. The tool I am using is Documentum.
Thanks,
MikeOne thing you should do is get rid of that Westell modem from verizon. Its junk. I replaced it with a DLink DSL modem and internet is faster. Not that this suggestion solves your problem.
-
Internet works fine, but can't see Airport Base Station w/ Airport Utility
I'm running Windows XP Pro on a Dell Latitude laptop with linksys wireless-n PCMCIA card. I have a Cable Modem running to a Linksys router (cloning a MAC address), running to the Airport Extreme Base Station. Internet works fine (as I type this), but Airport Utility cannot see the Airport Base Station. This has happened repeatedly after hard reset and re-configuration of Airport Extreme Base Station.
Do I have a bad piece of hardware?After doing a lot of research, this appears to be a pretty common problem for Windows users.
The only thing that has worked for me is to go into the Airport Utility, and under the file menu, click on configure other. Then enter the LAN IP address of your airport extreme. I think the default is 10.0.1.1, although I have a separate router between my cable modem and my airport express providing IP addresses, so mine was different. It didn't always work at first, but now almost every time my base station disappears, if I do this it can be found again. -
Please help. I have called Optus and my line is fine but the download is so slow stating 50 hours at time.
I can't even do a software update.What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try Ethernet -
I have a multimeter VI with separate while loops to accomplish the different tasks of reading voltage, current, etc. Each while loop has a stop button, but I need a button that will have to be pressed in order for the while loop to even start. I tried putting another while loop around the present one, but it still has to run once before it will stop. I want the user to have to press the button before it runs, because they interfere with each other.
I am just learning so patience and your kind assistance is greatly appreciated!
ElectroKateiZACHdx wrote:
Hello,
I'm not entirely clear with everything you have going on and what you want your final functionality to be, but you can use sequence structures to prevent a loop from starting until the user presses a button like this:
-Zach
I have to ask, why is an NI employee using examples using sequence frames? The same thing could be accomplished using data flow by simply wiring the value of the first stop button out of teh first while loop and connecting it to the second loop. This would then use data flow to control the sequence. Why show new users bad programming methods?
As to the original question I would concur with altenbach on using an event structure.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot -
Installing wireless router, router works fine but can't configure the modem
I'm configuring a wireless network for my parents, and I can't seem to get it set up right on my parents desktop with Windows XP SP2.
I bought a Linksys wireless router (WRT54GT) to set up a home network, and set that up quickly. It's not having any problems, but I can't set the modem into bridge mode. I'm connecting to DSL using a Westell Wirespeed modem (C90-36R516-01) that is pretty old, but I don't see why there is a problem. I went to the IP 192.168.1.1 in my browser while connected to only the modem to configure it, but the server always times out. When I plug in the router, it goes easily to the Linksys' configuration panel.
The only thing I can think of it that I configured the router before switching to bridge mode.
I tried getting around this problem by configuring the router to dial Verizon automatically using PPoE, but I don't know if it's actually working correctly, and it still asks me to dial up when I start Firefox. Other computers on the network see the router, but don't connect to the internet.One thing you should do is get rid of that Westell modem from verizon. Its junk. I replaced it with a DLink DSL modem and internet is faster. Not that this suggestion solves your problem.
-
Everytime I try to access the store I'm asked if I want to download iTunes 10 which I don't because it wont run on my OS and I can't decline the offer so I can't get into the store
iTunes has never supported XP64 bit.
However iTunes itself is a 32 bit program that will run on XP64 if you can get it installed. however this requires some hacking. Here are some links, you may be able to find others.
http://yukichigai.googlepages.com/iphonex64
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/
I haven't tried any of this myself. -
Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.
http://support.apple.com/kb/TS1363
Maybe you are looking for
-
Adobe creative cloud set up to install on a mac with parallels windows 8
Unfortunately it is not possible to install the program it always displays an error message. how can you loess the problem? error message: This application can not be run from a network drive-. copy it to a local folder and strarten it again.
-
DSC - OPC Connection - Can't read or write to tags
I am working on controlling some motors over an OPC server. The PLC is an M258, and the OPC server is CoDeSyS OPC DA. When I use MatrikonExplorer, I can read the value of tags, and change their values as needed. Using an evaluation version of NI OPC
-
Hi ALL, hope you are well. I can't remember my Answers for the security questions and i can't reset my Security questions because i don't have a rescue mail what can i do? and i tried calling the security support team and they told me they will send
-
I forgot my passcode. The Ipod touch is disbled. When I connect to Itune, it asks tp put the passcode but the screen is locked no inputs. Any help?
-
Fast Formulas for deduction elements
in the formulas generated for deduction elements, some of them have "Take_Overlimit_AT" while some do not. what is this value related to, and by selecting which option in the definition of the deduction is it generated?