How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

Similar Messages

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can i create an apple id without using a visa or credit card

how can i create an apple id without using a visa or credit card

Follow the directions here, EXACTLY:
http://support.apple.com/kb/ht2534

How can I create a new entry without using LOV for foreign keys.

Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
How can I create a new employee without using LOV for the foreign key "job_id".
On the first page I would like to choose the job_title from adf read-only table.
After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
Regards M.Winkler
Edited by: user3541283 on 06.10.2008 03:44
Edited by: user3541283 on 06.10.2008 03:50

Hi,
usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
Frank

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

That's a kernel panic and indicates some sort of problem either with the computer's hardware or software. Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. It would help to post the panic log: Mac OS X- How to log a kernel panic.
Meanwhile, try booting the computers into Safe Mode then restarting normally. If this is simply a disk repair or cache file problem then this may fix it.
You can also try creating a new admin account on each computer then booting into the new account. This would help determine if the problem is related to a bad file in the user accounts.

Writing into Excel file using PL/SQL and formatting the excel file

Hi,
I am writing into a excel file using PL/SQL and I want to make the first line bold on the excel. Also let me know if there are any other formatting options when writing into excel.
Regards,
-Anand

I am writing into a excel file using PL/SQL
Re: CSV into Oracle and Oracle into CSV
check that thread or search in this forum...

How can we update data in LDAP server using PL/SQL.

Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
Tarun

Hi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM

How can I get apple to email me things like updates and stuff like that on email?

How can I get apple to email me things like updates and stuff like that on email?

You can't.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer

How can I find my playlists in this new interface? And then, how can I transfer newly purchased songs to a playlist?

how can I find my playlists in this new interface? And then, how can I transfer newly purchased songs to a playlist?

iCloud does not store messages for you to see/access at icloud.com. It does back up messages so you can restore your iPhone if it ever needs to be reset to factory default. A backup is an image of all your data on the iPhone, and if you delete some messages, then they won't be part of any further backups.
If two people use the same iCloud account, then their devices are kept in sync, just like a single user's multiple devices are kept in sync. It's usually a good idea to have separate accounts for two people, since it's rarely the case that they want each phone to be an exact replica of the other.
Your iphone syncs contacts, events, camera roll, and many other things without the use of a computer.
Read about icloud here... http://www.apple.com/icloud/

How do I scan a photo to a file and then send the file as an attachment via email.

How do I scan a photo to a file and then send the file as an attachment via email.

All of this depends largely on what printer /software you have, which Email client you use and to some extent which OS you are running.
Most HP printers have HP Solution Center which is used to set up scanning,choosing where to save,etc. Once a file/photo is scanned and saved to the folder, open the folder.Select the file and at the top of the window should be the option to 'Email'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT4623 How can i download ios 7.1 without using my iphone and itunes

How can i download ios 7.1 without using my iphone and itunes

If you don't use your phone and you don't use iTunes, what are you expecting to use? Your options to update your device are Over The Air through Settings>General>Software Update or by connecting the device to iTunes and updating.
Best of luck.

How can I read the active (plugged in) DAQs and then send that to the device name input on DAQ assist?

I have a system property node for daqmx but it does not let me change it to read when i right click on it. I am trying to have my program detect the name of the daq that is plugged in to the PC and then send that to daq assistant so that it will run properly wiithout me manually having to change the device name every time i switch hardware.
Solved!
Go to Solution.

labview12110 wrote:
Im just frustrated that the only function I have is to get a list of things that I can't do anything with. MAX knows which is active can I call it up somehow?
You have do do programming. That is what LabVIEW is. MAX gives you all the tools to do everything you want and much more just program it to do what you want.
Attached is a VI that I think does what you want. I looks at all of your devices and returns the first non simulated one. Apparently this list already excludes devices not connected to the system.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Find Non Simulated Device.vi ‏6 KB

How can I create a video with effects using my ipad?

How can I create a video with effects (sepia, B&W, Negative, oval or any other shape borders) using my ipad? I would Like to keep a higher res and also be able to shrink it down to email or send in a MMS. Or should I just upload it to my PC and mess with it there? Some of the apps I have are very easy to use compared to the learning curve needed for video editing software.
Thanks

Thats the Problem . . . how many apps do I have to try until I find the one I want? I noticed a few will render the video thus losing its original size. When I went to edit it more in iMovie the video was smaller--not good. And what software do you suggest, Templeton, for the PC? I love the apps because they are easy. I dont have hours to mess around on a software to figure out if its something I want. Im looking for simplicity. Maybe Ill get more into it later. I just want to record simple video of my playing the guitar for self analysis and create a short video for family and friends.
Apps:
iMovie
CinemaFXV
VideoFix
Cartoonatic
Video illusion
VidEditor
Software:
Windows Movie maker (wont accept .mov files)
After Effects (Too little time, so much to learn)
Wondershare (Very easy but little choices)
VideoPad (Again. Few choices)

How can I create an csv/excel file using pl/sql and then sending that file

Similar Messages

Maybe you are looking for