How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg ‏48 KB

hafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

How can i create a new item in the app "health"?

how can i create a new item in the app "health"? I need a field for documentation of "Waist-to-height ratio", exactly for "circumference".
It's a matter of common knowledge, that the Waist-to-height ratio (WHtR) has more significance then the Body-Mass-Index (BMI).

If you mean you want to change a color of a calendar category or create a new one, you cannot do that, what is pre-loaded is what you get and cannot be edited.

How can i create my own file from the Adobe Export PDF to Word ?

How can I create my own file from the file of the Adobe Export PDF to Wodrd?

If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak

How can i creat CRC 32 CHECK WITH THE lookup table as attached.

how can i creat CRC 32 CHECK WITH THE lookup table.attached
i creat one,but not match the result number C++ version
result number C++ version:
FE 00 18 02 40 1E 65 43 00 03 E8        CRC32=>78 1F E9 06
FE 01 18 02 40 1E 65 43 00 03 E8        CRC32=>F8 8F 49 61
FE 02 18 02 40 1E 65 43 00 03 E8        CRC32=>7D FF B4 7F

due to some reason i can not attach the table.but you can find it herehttp://lavag.org/topic/15325-crc32/,it in the CRC.llb 84.03K =>CRC-32 Table.ctl thanks a lot

How can I show a 0% range in the data value label on a bar chart thanks?

How can I show a 0% range in the data value label on a bar chart thanks?

I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

How can I isolate iPad apps so only the ones I want people to use are visible to them?

Hello. How can I isolate iPad apps so only the ones I want people to use are visible to them?

At the moment it's not possible, but you could try providing feedback to Apple here http://www.apple.com/feedback/ipad.html (this has come up a few times so you won't be the first person to request it).
An alternative if you only want your customers to have access to only one app, is to look for cases that prevent access to the home button so that they can't get access to the home screen and therefore other apps. e.g. http://www.staypad.com/photos.html is a mounted case for use on walls/tables etc (there are probably others available, that is just the first one that my search found).

How can I create an audio CD from the audio only portion of my iMovie?

Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
Any help would be apprecaited.

This is how:
Go to:
'File'
'Share'
'Quicktime'
'Expert Settings'
'Audio as AIFF' or pick your brand of compression.
Drag and drop the resulting file into iTunes.
Enjoy!
P.S. - You didn't need to delete the video but I think that'll be okay.

How can I create an internal space from the border in every cell in a table?

How can I create an space between the text contents and the border inside in every cell in a table in Pages?

Change the Inset margin in the Inspector palette > T tab > Text

UWL Help - How can i create my own task within the Enterprise Portal

Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor Gopinathan

Hi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay

How can I create side bars without cropping the image?

I want to create side bars because I am projecting in an vertical panel, but if I crop the image them I only get the middle part of it.
How can I create side bars in an way that I can still move the image inside?

On a Video Track directly above the clip(s) you want to have behind the side bars, place a clip of Color (or whatever you want to use for your sidebars).
Now go to the Effects Tab > Matte >Mask Shape and drag the Mask Shape filter to the Color clip you have placed on the timeline.
Double click on the clip to open it in the viewer, and click on the Filters Tab.
Click Invert Box, and adjust the shape to get the side bars you want.
And now the clip(s) that are beneath this effect will have the side bars and be independent of it, so that you can move them around.
MtD

Can we create graphic and text in the same window of smartform without using template?

we create graphic and text in the same window of smartform without using template?

Hi Kinjal,
as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

How can I reset my admin. password without the MAC OXS reinstall, bought mine used and have no such disk

Hi, how can I change my admin password without the reinstall of MAC OXS disk or whatever that is, I bought my macbook privately and cant update my adobe flash without the password which I have never set up. but anything I type in is wrong...... as a password.

ok have read all relivant posts and have tried the restart command+R which does absolutely nothing. My Computer opens up as usual.
I have found another response which suggests command+S and generate an entirely new admin. and password and you are not supposed to loose a single file.
Has anyone done this and been successful? I have just installed a new hard drive in the last 3 months and don't want to do any damage.
Hearing a success story would be nice. Thanks

How can I create sub-arrays based on the positions of indicies in a separate index array?

Please forgive me if this question is basic or obvious. I am fairly new to LabVIEW and I'm trying to learn as I go along.
I have a 1D array of index values (the number of possible index values is not fixed, but can vary between uses of the application; it could be just {0, 1} on one day and {1, 5, 11, 678} on another) and a 1D array of measurement values (doubles). I'd like to parse the measurement values into sub-arrays for each index, so that if my index array was:
[0 1 1 1 1 5 5 0 5 5 1 0 1 1 5]
and my measurement array was:
[0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.10 0.11 0.12 0.13 0.14 0.15]
I would get back 3 sub-arrays:
[0.1 0.8 0.12]
[0.2 0.3 0.4 0.5 0.11 0.13 0.14]
[0.6 0.7 0.9 0.10 0.15]
I know there must be a simple way to do this, I guess I'm just stuck too much in matlab-array thinking to figure it out... please help!
-- jph
Solved!
Go to Solution.

jamespherman wrote:
Thus, I figured it might be possible to generalize this idea and send multiple sets of XY values to an XY graph.
OK, all we need is a trivial modification of what we already have. XY graph data is easiest handled using complex data. Here's a quick rewrite. See if this works for you.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
SplitInGroupsGraph.vi ‏14 KB

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

How can I create a new User with the Java API like OIDDAS do?

Hello,
I'm currently working on an BPEL based process. And i need to create an OCS user. So far I can create an user in the OID. But I cant find any documentation about given this user an email account,calendar and content function etc.
Did anybody know if there are some OIDDAS Webservices? Or did anybody know how to do this using the Java APIs?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

Similar Messages

Maybe you are looking for