How can I Create Class Diagram and save as image in Java

Hi
I have to make a project in java that will generate class diagram of the input class file.
I have some knowledge of listing methods/properties of a class file in text from but don't really know how to draw a class diagram model (JBuilder 2005 such class diagram whenever a class is compiled). I have to save that class diagram in an image file as well.
Please guide me what must be my line of action to follow. I need some suggestions on urgent basis.
Thanx in advance
Regards

Hi
My problem is that I have to construct toll like JUDE. What I need from this tool is just to simply draw the diagrams and save in an image format.
So I need to know how to draw the diagram and save in an image file. I don't know about the drawing libraries available in Java. Kindly help me
Regards

Similar Messages

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration
Just don't install the sample schemas. See the installation guide
http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
Using the Database Configuration Assistant
When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
Choose a custom install and don't install the sample schemas.
All other schems/tables installed are REQUIRED by Oracle

HT2731 I am from Nepal how can i create Apple Id and don't have VISA card?

I am from Nepal how can i create Apple Id and don't have VISA card?

Refer to this article:
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534

How can i create list box and dropdown in my report?

dear experts
how can i create list box and dropdown in my report?
thanks in advance

Pl. see the code given below.
REPORT Z_LISTBOX.
Data declaration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST.
Selection screen ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION SCREEN OUTPUT ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AT SELECTION-SCREEN OUTPUT.
NAME = 'PS_PARM'.
VALUE-KEY = '1'.
VALUE-TEXT = 'Line 1'.
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Line 2'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            ID     = NAME
            VALUES = LIST.
START-OF-SELECTION.
Regards,
Joy.

How can I create a DVD and/or share (email, etc.) a slideshow I created with iPhoto?

How can I create and/or share a slideshow I made with iPhoto?...Thanks!

I am sure there is a way however I don't use iPhoto, you may want to repost on the iPhoto forums which is where the iPhoto gurus hang out.

How can I create new carriforwarede and Brodforwarded wage types

Hi Gurus
We had one wage as special compensation.that has been done for to update in IT0014.
Now new requirement is came that special compesation was type they would like to update in IT0008. I have all the necessary configuration. its working fine. now client wants to create Brodfowarded and Carryforwarded wage types for this wage type.
Pls let me know how can I create these.?
And where should I have to map this?
Is it scheema level job or not?
pls asap.
Regards
suresh

Hi Navya
Thanks for your replay
Can you pls some elobarate this. becasue of I have not all done schema changes till now. here we have been using IN00 schema.
Can give some brief explanatation how can I do this. I have been wiating for you valuable replay. pls
Regards
Suresh

How can I create side bars without cropping the image?

I want to create side bars because I am projecting in an vertical panel, but if I crop the image them I only get the middle part of it.
How can I create side bars in an way that I can still move the image inside?

On a Video Track directly above the clip(s) you want to have behind the side bars, place a clip of Color (or whatever you want to use for your sidebars).
Now go to the Effects Tab > Matte >Mask Shape and drag the Mask Shape filter to the Color clip you have placed on the timeline.
Double click on the clip to open it in the viewer, and click on the Filters Tab.
Click Invert Box, and adjust the shape to get the side bars you want.
And now the clip(s) that are beneath this effect will have the side bars and be independent of it, so that you can move them around.
MtD

How can I create Windows Explorer (as a Tree strucuture) in Java

Hi All,
How can I create a Windows explorer (as a tree structure) in a Frame window?
Thanks
Sumode

File[] roots = File.listRoots();
     for (File root : roots) {
     System.out.println(root.toString());
     File[] directoryContent = root.listFiles();
     if (directoryContent != null) {
          for (File directoryFile : directoryContent) {
          System.out.println("File: " + directoryFile.toString());
     }

How can I create a diagram where equal data from different cells will be added to one sector?

Hi,
I'm a new Mac user, so I have a lot of problems and questions every day. Moving to Mac from PC is not an easy thing)
Here is my problem:
I need to create a few diagrams for my science work, but can't correct one mistake. Every time one data from one cell from the table takes its own place in the diagram. But I need to ceparate equal data to show it is one section.
An example:
Sex
Age
Female
18
Female
18
Female
18
Female
25
Female
30
We need to create a diagram to show that we have
60% - 18 years
20% - 25 years
20% - 30 years
But Numbers doesn't show it that way. Here how it does:
So please help me. How can I do that?

Hi ProCauda,
Some example data of people and their age:
The COUNTIF function will give the number of people of each age.
In another table, B2 contains this formula (and Fill Down to the bottom of B)
=COUNTIF(Table 1::B,"="&A2)
In this example, 3 people are 18 years old, 0 people are 19 years old, and so on. Use this table to calculate each age as the % of the total, then use that as the data for your diagram (graph, chart).
Regards,
Ian.

How can I create classes dynamically?

Guys
My requirment is I want to create classes and their instancess too dynamically. First is it possible in Java?
If so, then my next question is how can I refer such dynamically created classes in my code to avoid compilation error.
Thanks in advance
Regards
Sunil

For other ways to generate classes on runtime you could also have a look at BCEL:
http://jakarta.apache.org/bcel
And dynamic proxies:
http://java.sun.com/j2se/1.4.2/docs/guide/reflection/proxy.html
If so, then my next question is how can I refer such
dynamically created classes in my code to avoid compilation
error.Generally the classes that you load should either implement some interface or extend some abstract class you know of at compile time so that the compiler knows what methods are available for use. If that's not possible you can only use reflection.

How can I create a black and white image similar to what I see in the "Replace Color" tool?

Hi all, I'm just wondering how I can create a black and white image similar to what I see in the preview window of the "Replace Color" tool. See attached screenshot for clarification -- I need the grass to be black while the soil is white or vice versa. Any tips?

One way is to use Select>Color Range
Make a new Color Fill Layer>White
(Layer>New Fill Layer>Solid Color)
Put a new color fill layer below>black
Just invert the layer mask on the top fill layer for the opposite effect.

About adobe voice....how can I download my video and save a copy in my pc?? help me please!!

(english): I made a video with adobe voice in my ipad mini. I sent by email to my boss, but he needs to save a copy in his pc and he doesnt know how can do this.
español: Hice un video con adobe voice en mi ipad mini. Lo envie por email a mi jefe, pero el necesita salvar una copia de ese video en su pc y dice que no sabe como hacerlo pues creo que el programa no se lo permite.

You've added the music to your computer's iTunes library (File > Add To Library) that you want to sync to the iPad ? If you have then you should be able to select the iPad on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 then you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and then use the Music tab on the right-hand side to sync the music to your iPad (if there are downloads on your iPad that aren't yet on your computer's iTunes then you may want to copy them over first via File > Devices > Transfer Purchases).
Syncing Music : http://support.apple.com/kb/HT1351

How can I creat virtual channel and traditional devices while my card installed,I can not do?

I installed PCI-6220 card,and I also installed DAQmx and Traditional DAQ in my computer,
but I cannot creat virtual channel at the last step(attachment:TDAQ6220.jpg).
Maybe this is the reason I didn't creat traditional NI-DAQ Device,but I can not creat it.
(see attachment: DAQ Device.jpg,there is no PCI-6220 on list).
What's wrong?What shall I do?
Junwei You

Hello Rainer,
You can see this attachment(6024E.jpg),the 6024E card appears on Traditional NI-DAQ Devices,
but I don't know how can it be created(I don't creat it,we buy the whole system together with the machine).
I tried create a new traditional Device(I want to confirm 6024E), but still I can not see any NI-DAQ device in traditional NI-DAQ device
lists. See the 'Create New....' interface.How can do it?
Thanks!
Attachments:
6024E.JPG ‏128 KB

How can I Create Class Diagram and save as image in Java

Similar Messages

Maybe you are looking for