How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Can't create the recovery discs for Toshiba Satellite C55-A5387 Laptop

Hello, I just got my Toshiba Satellite with Windows 8 and have barely used it. One of the first things I did was go to the TOSHIBA Recovery Media Creator to make recovery discs but I get error messages when burning the DVDs.
Toward the end of burning the DVD I see this:
"Failed to read the following file.
D:\ZZimages\ZZimages\install25.swm
(error Code: 02014F-20-0000000)"
Or this slightly different error messages:
"Failed to read the following file.
D:\ZZimages\ZZimages\install16.swm
(error Code: 02014F-20-0000000)"
Lost
Solved!
Go to Solution.

If the problem is the recovery partition on your hard drive instead of the DVD's you will have to call Tech support 1-800-457-7777 , Call while you still have 90 days free tech support.
Post your findings, thanks!
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

How can i create the blue "I"-Button for the Documentation in a view

How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PM

you have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull.

Satellite U205-S5034 - Error when trying to create the recovery discs

Hi Everyone,
I am having trouble with The TOSHIBA Recovery Disk Creator. When trying to create the recovery discs this error comes up:
An unexpected error occurred. Please quit this application and restart it. (Error Code: 0F00FE-F1-00000002)
The machine is a Satellite U205-S5034 running XP Pro SP3.
Any help will be greatly appreciated. Thanks and have a great day.
DaveMatt44

Hi
What kind of DVDs you are using for creating a Toshiba recovery disc? As yet I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. Friend of tried DVD+R and he couldnt create a recovery disc. After that he tried DVD-R and all was fine but I dont know why this happened.
So please try other discs.
Furthermore check the Toshiba page for a firmware update of CD/DVD drive. Maybe it will help you.

How can we create the error log in a ABAP program

Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.

Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale

How can i create the exceptions in query

Hi Firends,how can i create the exceptions for key figures and charectristics and how can can i assign the colours and when we will create the variables for exceptions..
please let me know..
Assign Points surely..
regards

Hi,
Not sure i understnad your request 100%, but exceptions for key figures are created as explained in http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/1a/615f64816311d38b170000e8284689/content.htm
Assign points if useful,
Xibi

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

How can we create the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this.

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

How can we create the following DOC?

how can we create the following Documents?
Two Enquiry one quotation.
Two Quotation one Sales Order.
Two Sales Order one Delivery.
Two Delivery one Billing.

Hi,
You need to execute the below transaction:
1) T.Code - VL11 : To create 2 different enquiry. To make a single Quotation for 2 enqury, use T.Code - VL21. Here once you enter the main screen, select drop down on Sales Document Type, the first option on topmest line & you will get an option --> Create with reference. Select the first enquiry & enter & repreat the sceond enquiry & enter. Now Both Enquiry will be a part of same Quotation.
2) T.Code - VL21: To create 2 different Quotation. To make a single Quotation for 2 enqury, use T.Code - VL01. Here once you enter the main screen, select drop down on Sales Document Type, the first option on topmest line & you will get an option --> Create with reference. Select the first enquiry & enter & repreat the sceond enquiry & enter. Now Both Quotation will be a part of same Order.
3) T.Code - VA01: To create 2 different Order. To make a single delivery, go to T.Code VL10A & select the 2 Order & create collective processing of Delivery to create a single Delivery.
4) T.Code - VL01N: To create 2 different Delivery (other T.codes can also be used to create delivery such as VL04, VL10A, VL10C, etc). To create single Billing for 2 Delivery, go to T.Code: VF01 & enter 2 Delivery numbers & press ENTER. This will merge 2 Delivery together.
Note: It is assumed that the parameter are common & meet the requirement for combining various documents.
Regards,
Rajesh Banka
Reward suitable points.

How can I increase the character limit of my text messages for Droid Maxx 4.4?

How can I increase the character limit of my text messages for Droid Maxx 4.4?

Send as a MMS.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

How can I create the component like ComboBox in flashlite2.0 ?

How can I create the component like ComboBox in flashlite2.0
I'm a new man, please gave me an example!
Thanks.

I don't see anything special about the play button in MPMoviePlayerController....
the "glowing" effect icons are all standard UIBarButtonItem objects:
http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIBarBut tonItem_Class/Reference/Reference.html

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Similar Messages

Maybe you are looking for