How can I delete all items on the "Done" list in Reminer-App? There are meanwhile hundreds of items (shopping, appoitments, ...) and I don't want to spend hours deleting them.
How can I delete all items on the "Done" list in Reminer-App? There are meanwhile hundreds of items (shopping, appoitments, ...) and I don't want to spend hours deleting them.
You can't remove the built-in root certificates, but you can remove their trust bits via the Edit button to prevent Firefox from using them as a trusted root certificate.
Intermediate certificates that Firefox has stored when visiting websites that show as "Software Security Device" should never has trust bits set.
Note that it is the responsibility of a server to send all required intermediate certificates to make it possible to build a certificate chain that ends with a built-in root certificate.
Similar Messages
-
When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?
Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
tt2 -
How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?
When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer. -
I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?
Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist -
I unfortunately just got my IPhone 4s stolen.I thought I had the find my iPhone enabled but I didn't because I cannot locate the phone when I sign in ICloud.I have a password on the phone but i'm not sure if I turned on the option where the phone resets if you incorrectly put the password more than ten time. I immediately called my phone company (Verizon) and reported the phone stolen.So I know whoever took the phone cannot place calls or use the phone. But can they still access my data on the phone if they manage to unlock the phone? If so how can I erase all data on the phone so the thief can't access my personal information? is there any other way other than Find my IPhone to wipe off the data on the phone? I really don't want my personal information such as pictures, text messages, notes and social networks profile available to a stranger!!? Help please!!!
Hello thewrongway,
I'm sorry to hear about your phone! I understand the need for an active device. You are able to activate an old device and process an insurance claim for your iPhone 4s within 60days from the incident date. Keep in mind if the old phone is not a smartphone and you currently have unlimited data that feature will fall off. If you have a tier data plan no changes will be made. Please let me know if you have any additional questions. Thank you.
TominqueBo
VZW Support
Follow us on Twitter at @VZWSupport -
On I-Mac, how can I close all tabs at the same time?
On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly -
I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?
Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F -
How can I tell all PCs has the DAU installed?
I am running ZCM 10.3 on SLES 10. I have enabled patch management and I saw the DAU has version 38. How can I tell version 38 is the latest DAU for ZCM 10.3.
Also, how can I tell all devices have the latest DAU installed? I came across a few devices have problem with ZCM agent and after I fixed the issue, I saw it started to install the DAU. However, if I have not touched that managed devices, I would not know there is a problem. Can I check all devices status with DAU on ZCC?
Regards
Andyandyj2009,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?
Check this article: iOS: Third-party Bluetooth headsets, headphones, and keyboards
Unpairing a Bluetooth accessory from an iOS device
If you've paired your iOS device with a Bluetooth accessory and no longer wish to use that accessory, you may unpair it. If you wish to leave the device paired, but route calls through a second, paired device, turn off the first device and then turn on the second device. Then in Settings > General > Bluetooth, tap on the device you wish to use.
From the Home screen choose Settings > General > Bluetooth. If Bluetooth isn't on, turn it on.
Choose a device and tap Unpair.
Until you pair the Bluetooth accessory again, your iOS device won't route information through it.
* Find information on which iOS versions and devices support which Bluetooth profiles. Not all Bluetooth stereo headphones include a mic. Only those with a mic and that support handsfree profile (HFP 1.5) can be used to make and receive calls. -
How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395
Found the answer myself while helping to set up iPhone. It is simple when you know how. Before signing out of iCloud to sign in again and restore the link to Photo Stream I had opted to copy iCloud contacts to the Mac. When I signed in again this created two iCloud views which can be seen in Contacts Preferences. I just disabled one of them. Not brave enough to attempt removal but I gues this would work too.
-
How can I remove all returns within the text?
I copied and pasted text onto pages from the internet, but the text does not go all the way to the end of the set margins that i have on Pages, instead it goes about halfway or so and begins on a new line. how can i remove all of the spaces between the words so that it runs the full length of the page.
It blows my mind that i have to resort to seeking help on the apple forums for this problem, it seems like something so simple would be a standard feature when adjusting text on the page. The only thing that could frustrate me more is if it impossible to do on this software, or if it is simple to do and I was too stupid to figure it out. If it is impossible then I'm **** out of luck because the document is just to **** long to sit there for hours and manually delete every single last return.Not to preempt your fun of playing with AppleScript, but here's my take on it:
tell application "Pages"
tell document 1
-- Make sure there's no selection
select insertion point before character 1
set cc to count characters of body text
set returnOffsets to (character offset of every character where it is return)
-- Reverse order, since deletion would alter all subsequent offsets
repeat with n in reverse of returnOffsets
if (n > 1) then
if n < cc and character (n + 1) is return then
-- Treat double returns as a true paragraph break.
-- Delete the extra.
delete character n
else if character (n - 1) ≠ return then
-- Change single returns into spaces.
set character n to " "
end if
end if
end repeat
end tell
end tell -
F4IF_INT_TABLE_VALUE_REQUEST - how can I return all values from the line?
Hi,
I'm using FM F4IF_INT_TABLE_VALUE_REQUEST to show a pop-up with my internal table values. The internal table has 3 fields, ATINN, ATZHL and a description field ATWTB. ATINN and ATZHL are needed to complete the unique table key, however this FM will only return the value of one field in any line I select.
How can I see all the values in the line I select in the return table?
My code is as follows:
DATA: tbl_cawnt LIKE cawnt OCCURS 0,
wa_cawnt LIKE cawnt,
BEGIN OF tbl_list OCCURS 0,
atinn LIKE cawnt-atinn,
atzhl LIKE cawnt-atzhl,
atwtb LIKE cawnt-atwtb,
END OF tbl_list,
wa_list LIKE tbl_list,
tbl_return LIKE ddshretval OCCURS 0,
wa_return LIKE ddshretval,
tbl_fields LIKE dfies OCCURS 0,
tbl_dynp LIKE dselc OCCURS 0.
REFRESH: tbl_list, tbl_cawnt.
SELECT atinn atzhl atwtb
FROM cawnt
INTO CORRESPONDING FIELDS OF TABLE tbl_cawnt
WHERE spras EQ sy-langu.
LOOP AT tbl_cawnt INTO wa_cawnt.
CLEAR wa_list.
MOVE: wa_cawnt-atwtb TO wa_list-atwtb,
wa_cawnt-atinn TO wa_list-atinn,
wa_cawnt-atzhl TO wa_list-atzhl.
APPEND wa_list TO tbl_list.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ATWTB'
dynpprog = sy-repid
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = tbl_list
return_tab = tbl_return
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks!Hi,
Use the structure DYNPFLD_MAPPING
With this internal table you can easily define that you want to return
other columns of the hit list in addition to field RETFIELD to the
screen.
In this IT you can MAP the screen fields to the serch help screen fields this has three fields
FLDNAME this is the field anme from the search help
FLDINH This has to be blank which would be field with the field value that you want to map
DYFLDNAME THis is the screen field name.
So here you can get the values for the other fields that you want which are on the search help just populate the name of the fields in FLDNAME.
Regards,
Himanshu -
How can I sign out or remove the old apple ID in app store's updates?
I created a new apple id and signed in the app store. When I update my apps, it requires me to sign in with my old apple id, and I cannot sign out my old id. How can I sign out or remove the old id in app store's updates?
Delete those applications and then download them from the new Apple ID. This may require repurchasing them.
(100330) -
How can I replace ALL Contacts on the iPhone with my MobileMe Contacts?
I have removed all duplicates in AddressBook on my various Macs and have uploaded the master copy to MobileMe. I would now like to replace all Contacts on my iPhone with that MobileMe master.
I have followed the steps in the KB article for syncing the iPhone but when I get to the step of turning on the iPhone Settings for the Contacts it looks like the sync wants to merge the contacts. Of course, I do not want to "merge" since that will reintroduce all those duplicates.
I suppose I could manually delete each of the the hundreds of contacts that are on my phone until it is empty ... and then turn on the iPhone setting for Contacts. That way it will have no option other than "add." But surely there is a more efficient way.
(FWIW, when I turned OFF the setting for the Calendar it did empty the iPhone's calendar, which is what I wanted. But it didn't do that for the Contacts -- I turned that setting off but I was not asked if I wanted to keep or toss the Contacts. They are all still on the phone.)
This is an OG iPhone, if that matters.Matthew Smith wrote:
... The only way I can think of doing it otherwise is possibly by syncing via iTunes via another Mac OS X user account where the address book is empty and then deleting them there and resyncing. ...
Brilliant! That worked like a charm.
I created a new User Account on one of my Macs and logged into it. I connected my iPhone to its iTunes and checked my iPhone's Sync Contacts option in iTunes. Since that account's address book was basically empty (two dummy contacts, one for Apple and one for this new user), I ended up with only those two Contacts on the phone. Then, going back to my real User account (which does not have syncing turned on in iTunes) the phone synced nicely with the MobileMe account and populated the phone with all the MobileMe contacts and groups. -
How can I kill all Threads of the same class from within the run() method?
Ok
I have a class called Consumer that extends Thread
I have several Consumer threans running... but, when a certain condition is true (within the run() method) in ANY of the threads, I want to kill ALL the threads of that object.
is this possible?I know this is gonna be too demanding, but can someone please tell me why my Consumer's run() method never reaches the System.out.println( "ALL CONSUMING DONE") line
Create a multi-threaded prime number calculator that is based on the producer-consumer model
using semaphores. Your program should be able to check for prime numbers in a range specified
by the user and with a variable number of threads. Example:
$ java PrimeFind 3 5000 10000
should use 1 producer and 2 consumers (3 threads in total, obviously the minimum is 2) to find all
the prime numbers in the range [5000,10000].
The producer should: use a buffer to store candidate numbers that have to be checked for
primality.
Consumers should: read from the buffer, check if a number is prime and update the status of the
program accordingly (e.g. show the number on the screen, or save it to a file)
import java.util.concurrent.Semaphore;
import java.io.*;
public class Assign1 {
static int fromThisNumber;
static int toThisNumber;
static int numberOfThreads;
static int buffer[];
static Semaphore ready; /*This semaphore is used by the Producer to signal
an "OK" to the consumers*/
static Semaphore critical; /*This is a Mutex semaphore. It allows only 1 consumer
to enter his critical section.
static Semaphore counter; /*This semaphore acts as a counter.
Instead of having a global variable
incremented each time, we just release()
this semephore when we find a prime number
Because remember that release() increments permits
static Producer prod;
static Consumer cons[];
static int in=0;
static int out=0;
static PrintWriter outFile;
public static void main (String args[]){
try{
outFile=new PrintWriter(new FileWriter("primes.txt"));
}catch(Exception e){}
numberOfThreads=Integer.parseInt(args[0]);
fromThisNumber=Integer.parseInt(args[1]);
toThisNumber=Integer.parseInt(args[2]);
buffer=new int[Integer.parseInt(args[2])-Integer.parseInt(args[1])+1];
ready=new Semaphore(0,false); /*We initialise it to 0 because we wait
for the Producer to produce atleast a
item. Suppose ready was 1 and if
Consumer ran first he would be in an
empty buffer */
critical=new Semaphore (1,false);/*We initialise it to 1 because when
the first Consumer thread tries
to enter its critical section, it
should be allowed to;
Subsequent threads will have to
wait since only 1 thread can
access its critical section at a time*/
counter=new Semaphore(0,false); // duh!
cons=new Consumer[numberOfThreads-1]; /*numberOfThreads-1 because 1 thread
is taken by the Producer*/
//Creating Producer object
prod=new Producer();
//Creating the Consumer object and start the thread.
for(int i=0;i<cons.length;i++)
cons=new Consumer();
cons[i].start();
prod.start();
//Printing to screen and file
/* for(int i=0;i<buffer.length;i++)
if(buffer[i]!=0)
System.out.println(buffer[i]);
outFile.println(buffer[i]);
System.out.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits()+"\n primes.txt written");
outFile.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits());
outFile.close();*/
static class Producer extends Thread {
public void run(){try{
while(in<buffer.length) /*'in' should always be more than 'out'.Oherwise the consumer will try to access an empty index*/
{ System.out.println("producing");
buffer[in]=fromThisNumber;
in++;
fromThisNumber++;
ready.release();
catch (Exception e){e.printStackTrace();}
System.out.println("ALL PRODUCING DONE");
static class Consumer extends Thread {
int tempout=0;
public void run(){try{
System.out.println("before while"+this.getId());
while(tempout<=in)
System.out.println("before ready"+this.getId()+" "+ready.availablePermits()+" "+in);
ready.acquire();
System.out.println("before critical.acquire"+this.getId());
critical.acquire();
tempout=out;
out++;
critical.release();
if(!isPrime(buffer[tempout]))
{System.out.println(buffer[tempout]+" by "+this.getId());buffer[tempout]=0;}
else {counter.release();System.out.println("prime added: "+buffer[tempout]+" by "+this.getId());}
critical.acquire();
tempout=out;
System.out.println("tempout:"+tempout+" of "+this.getId());
critical.release();
System.out.println("ALL CONSUMING DONE"+this.getId());
catch(Exception e){e.printStackTrace();}
//Prime number-checking method
public boolean isPrime(int n){
for(int i=2;i<=(n/2);i++)
if(n%i==0)
return false;
return true;
======================
import java.util.concurrent.Semaphore;
import java.io.*;
/* 3 questions to ask Barlas
* Why error if I start the Consumer threads before Producer
* Why does the counter semaphore always give a +1 result at the end
* Is there a way I can verify that all the work is not being done by only 1 consumer thread? In other words, the workload is being shared properly
* if I put ready.acquire() outside or inside the while loop, its not making any difference, why?
* Strangely, its not making any difference if I playing with the release() and aquire() of the semaphores, WHY?!?!
public class Assign1 {
static int fromThisNumber;
static int toThisNumber;
static int numberOfThreads;
static int buffer[];
static Semaphore ready; /*This semaphore is used by the Producer to signal
an "OK" to the consumers*/
static Semaphore critical; /*This is a Mutex semaphore. It allows only 1 consumer
to enter his critical section.
static Semaphore counter; /*This semaphore acts as a counter.
Instead of having a global variable
incremented each time, we just release()
this semephore when we find a prime number
Because remember that release() increments permits
static Producer prod;
static Consumer cons[];
static int in=0;
static int out=0;
static PrintWriter outFile;
public static void main (String args[]){
try{
outFile=new PrintWriter(new FileWriter("primes.txt"));
}catch(Exception e){}
numberOfThreads=Integer.parseInt(args[0]);
fromThisNumber=Integer.parseInt(args[1]);
toThisNumber=Integer.parseInt(args[2]);
buffer=new int[Integer.parseInt(args[2])-Integer.parseInt(args[1])+1];
ready=new Semaphore(0,false); /*We initialise it to 0 because we wait
for the Producer to produce atleast a
item. Suppose ready was 1 and if
Consumer ran first he would be in an
empty buffer */
critical=new Semaphore (1,false);/*We initialise it to 1 because when
the first Consumer thread tries
to enter its critical section, it
should be allowed to;
Subsequent threads will have to
wait since only 1 thread can
access its critical section at a time*/
counter=new Semaphore(0,false); // duh!
cons=new Consumer[numberOfThreads-1]; /*numberOfThreads-1 because 1 thread
is taken by the Producer*/
//Creating Producer object
prod=new Producer();
//Creating the Consumer object and start the thread.
for(int i=0;i<cons.length;i++)
cons[i]=new Consumer();
cons[i].start();
prod.start();
//Printing to screen and file
/* for(int i=0;i<buffer.length;i++)
if(buffer[i]!=0)
System.out.println(buffer[i]);
outFile.println(buffer[i]);
System.out.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits()+"\n primes.txt written");
outFile.println("Total primes found between "+args[1]+" and "+toThisNumber+": "+counter.availablePermits());
outFile.close();*/
static class Producer extends Thread {
public void run(){try{
while(in<buffer.length) /*'in' should always be more than 'out'.Oherwise the consumer will try to access an empty index*/
{ System.out.println("producing");
buffer[in]=fromThisNumber;
in++;
fromThisNumber++;
ready.release();
catch (Exception e){e.printStackTrace();}
System.out.println("ALL PRODUCING DONE");
static class Consumer extends Thread {
int tempout=0;
public void run(){try{
System.out.println("before while"+this.getId());
while(tempout<=in)
System.out.println("before ready"+this.getId()+" "+ready.availablePermits()+" "+in);
ready.acquire();
System.out.println("before critical.acquire"+this.getId());
critical.acquire();
tempout=out;
out++;
critical.release();
if(!isPrime(buffer[tempout]))
{System.out.println(buffer[tempout]+" by "+this.getId());buffer[tempout]=0;}
else {counter.release();System.out.println("prime added: "+buffer[tempout]+" by "+this.getId());}
critical.acquire();
tempout=out;
System.out.println("tempout:"+tempout+" of "+this.getId());
critical.release();
System.out.println("ALL CONSUMING DONE"+this.getId());
catch(Exception e){e.printStackTrace();}
//Prime number-checking method
public boolean isPrime(int n){
for(int i=2;i<=(n/2);i++)
if(n%i==0)
return false;
return true;
===========================
BTW, when I tried to change extends Thread to implements Runnable I got some kinda of error.
Actually, my program is pretty complete... its just that something if messed up in my Consumer's run() method's while loop... I think
I know guys its crazy to ask ya'll to look at so much code, but.... I'd really appreciate it. This assignment is killing me, been at it since 10 hours now....
Maybe you are looking for
-
Envy 100 eAll-in-One D410a (US) doesn't work with cartridge HP300 (Europe)
Hi all, I bought a HP Envy 100 eAll-in-One (CN517A) D410A in 2011 when I was living in the US. I always used HP60 cartridges without any problems while in the US. In 2013 I was relocated to Europe (Luxembourg), and recently my last supply of US-bough
-
I am an electrical engineering student who has been assigned a project with LabView. All that I have learned with LabView has been self-taught (slowly and painfully I should add). I would like to open a subVI front-panel that I have created, and then
-
Kernel task uses 750MBs of RAM since installing Mavericks
Hi All, I'm new to these forums and could really use some help. After installing Mavericks I noticed my system was running deathly slow even with no applications open. At first I assumed it was indexing so I waited a day. I noticed kernel task, the f
-
Can Dreamweaver CS6 be installed on WinXP computer with Indesign CS5.5
I already have a copy of InDesign CS5.5 installed on a PC with Windows XP Pro (SP3). Can I install the latest version of Dreamweaver CS6 on to this machine and retain use of existing Indesign version?
-
Mobileme is broken and not opening ical when I am signed in. mac and iphone and macbook can't sync ical with each other. the round disc just runs and runs until it times out with error message. This is on discussion boards and wide spread. When w