How can I design a BPM with mulitiple IDOC types as sender

Hi Experts,
I am using PI 7.1
I have a senario that I have to design a BPM in such a way that I will get different IDOC types as sender while the receive step has to trigger the the respective IDOC types at run time.
For example: when matmas is the IDOC the BPM instance have to trigger only the respective Abstract interface at runtime.
In my senario I have 5 IDOC TYPES which should pick the related one using a single Abstract Interface in the same design( one BPM ).
Is this possible. Please suggest me how can I do this if possible.
Regards
Shankar.

Hi,
you could work with multiple receive steps that triggering the process.
Similar to the example pattern in SAP Basis BpmPatternSerializeMultipleTrigger
http://help.sap.com/saphelp_nw04/helpdata/en/77/0737133012b24b9d0a12c6df2b1054/frameset.htm
In the fork step you could set the number of required branches to 1 that means only one receiving IDoc is required to leave the fork step.
Regards
Patrick

Similar Messages

How can I create a solution with Livecycle

I work for a high school and we have about 12 pdfs that we need parents to read/scroll through, then 10 (different) pages that we want them to print, complete and return to the school. Finally, we want them to see a "Thank you, you have done all you have to do" type screen. We want to make it as user friendly as possible so I was thinking...
Reading pages, 1 at a time with next at bottom.
Click next and it takes them on. When they get to printing pages 1 print button prints all pages we need them to print. Click next, and it takes them to optional print pages.
Click next and it says, thank you.
How can I make this happen if I already have all the pdfs?
Help please.
John Dent
[email protected]

Thank you soo much. A few questions?
They weren't created in designer but could I just import all of them?
How do "build the structure" for the naviagtion?
Where/how do you add the script.
Thanks again,
John Dent
Date: Fri, 30 Jul 2010 07:01:08 -0600
From: [email protected]
To: [email protected]
Subject: How can I create a solution with Livecycle
I assume that all of these PDFs were created in Designer. If so you can add any buttons that you want to appear on every page (Next, Previous) onto the Master page then there is script you can add to the buttons to actual move the pages (xfa.host.pageDown() and xfa.host.pageUp()). The Prin button can be added to the specific page and you can pass the page numbers that you want to print as a parameter to the print command. Lastly when you get to the last page and the click Complete you can display a messageBox with your Thank you message.
Hope that helps
Paul
>

Can I Design a Forum with using web dynpro for java?

Hi All:
Can i design a forum with using web dynpro for java?
I want to design an application like a simple forum which maybe has many replies.So if i use
the UI technology "web dynpro for java", i will to create UI elements dynamically.How can i control this
dynamical UI elements to keep layout ?

Hi,
yes you can do that....
for exaple if you observe SDN...
you can imagine like....
A big Transparent Container(TC)....
Inside that number of other TCs(depending upon the question nd its replies...)....
In side each TC, again around 9 UIElements....
one for menioning what is the question/reply?
other for your description of question/reply...
other for your name,
displaing your fourm point... etc...
So it will be
for(loop till your (Question+No of replies))
Create Transparent Container....
Add Childs to the Container...
Decide your layout....
In case if you want to know how to create UIElements dynamically....
http://help.sap.com/saphelp_nw04/helpdata/en/4f/07cf3dd28b5610e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/dynamic%2bui%2bgeneration
Regards,
Srinivas.
Regards,
Srinivas.

How can I pair an iPad with an android phone via Bluetooth?

How can I pair an iPad with an android phone via Bluetooth? I get the pair message on both, but after acknowledging on both devices the connection fails to establish. I looked around and everything I found had to do with file transfer. I can share access to the internet via Bluetooth and it works with other devices I've tried this with. Thanks.

Sorry. After re-reading my question I realized that I wasn't clear. I don't want to transfer files. I want to use PDANet from my android and connect my iPad for internet access via bluetooth. I know this is a 2 way transfer of data not very different from transferring files, but I just want to be sure that this is not going to work so I can stop trying as if I'm doing something wrong. Like I said, I can do this with any other bluetooth capable device/computer I have. Seems like it's just not working either by design or as a result of some limitation. I guess 2 way communication with a headset gave me hope that internet access would work. Thanks!

How can I design UI on Native SDK

Hello,
Does anybody know how can I design UI on Native SDK? Basically, I just want to add a menu that
contains some option such as change colors, and then rest of the screen will display what I draw
on the screen. If someone knows, I will really appreciate that.

You could subclass JDialog and write your own help dialog.
The help dialog could be shown several ways;
- Create a help menu item if your program has menus
- Create a help button to be more obvious
- Create a pop up menu with a help option in it
- If you have JLabels which describe any of your components, you could add a MouseListener to them to open the help when a user clicks the label.
Obviously you'll want to make the dialog non modal as not to infuriate your users, and maybe set it always on top if your app uses most/all of the screen.

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?
I have rejoined the iPhone community, not with one iPhone but with two. My wife agreed to move from the unenlightened!
I have set up both under my apple account and want to keep it that way. But I do not want iMessages going to both phones. I would like separate message queues but share all apps and other purches from the store.
I have created a separate AppleID for her but under Settings>Message>Receive At (it currently says 2 addresses) > ... will not allow me to change the current eMail address and when I add hers (her appleid) it errors out. The only thing I can do in the Apple ID field is to manage my account and not change it to hers.
How can I have 2 iPhones (and my iPad) on the same account but have separate identies?
Thanks,
LpGrumpy

1. Yes. Restart with the Option key held down as needed.
2. No, it won't be a problem.
(83373)

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

My neighbour's Mac Book Pro shows up as discoverable when Bluetooth is turned on in my iPad Air. How can I block her device? How can I prevent her pairing with my iPad Air. I need Bluetooth on to play music over my system.

My neighbour's Mac Book Pro shows up as discoverable in my Bluetooth list on my iPad Air. How can I block her Bluetooth device? How can I prevent her pairing with my device? I need Bluetooth to stream music on my Bose system. Thanks!

If your device is discoverable, the other BT device would try (I am not sure if that would be successful). If it was, it would appear in your system preferences>Bluetooth.
Take a look at this re: security:
http://support.apple.com/kb/PH10786
This is from another Apple article:
Use Bluetooth
You can wirelessly transfer files between computers—even Mac to PC—using the Bluetooth File Exchange utility. You can even browse selected devices and retrieve files remotely. For extra security, you can stipulate that only trusted devices be allowed to connect to your Mac, and 128-bit over-the-air encryption is also available
Barry
P.S. Since I have not had the issue, I have not researched this before. Thank you for making me look into BT security
Message was edited by: Barry Hemphill

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for this OS.

How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.

VueScan
VueScan FAQ

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How Can We Tune the Joins with "OR" Caluse ?

Hi
We've identified one Query in one of Our PL/SQL Stored Procedure which is taking huge time to fetch the records. I have simulated the problem as shown below. The problem Is, How can i tune the Jions with "OR" Clause. i have tried replacing them with Exists Caluse, But the Performance was not much was expected.
CREATE TABLE TEST
(ID NUMBER VDATE DATE );
BEGIN
FOR i IN 1 .. 100000 LOOP
    INSERT INTO TEST
    VALUES
      (i, TO_DATE(TRUNC(DBMS_RANDOM.VALUE(2452641, 2452641 + 364)), 'J'));
    IF MOD(i, 1000) = 0 THEN
      COMMIT;
    END IF;
END LOOP;
END;
CREATE TABLE RTEST1 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST1
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST ;
CREATE TABLE RTEST2 ( ID NUMBER, VMONTH NUMBER );
INSERT INTO RTEST2
SELECT ID, TO_NUMBER(TO_CHAR(VDATE,'MM'))
FROM TEST;
CREATE INDEX RTEST1_IDX2 ON RTEST1(VMONTH)
CREATE INDEX RTEST2_IDX1 ON RTEST2(VMONTH)
ALTER TABLE RTEST1 ADD CONSTRAINT RTEST1_PK PRIMARY KEY (ID)
ALTER TABLE RTEST2 ADD CONSTRAINT RTEST2_PK PRIMARY KEY (ID)
SELECT A.ID, B.VMONTH
FROM RTEST1 A , RTEST2 B
WHERE A.ID = B.ID
AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
BEGIN
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST1');
DBMS_STATS.gather_table_stats(ownname => 'PHASE30DEV',tabname => 'RTEST2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX1');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST1_IDX2');
DBMS_STATS.gather_index_stats(ownname => 'PHASE30DEV',indname => 'RTEST2_IDX1');
END; Pls suggest !!!!!!! How can I tune the Joins with "OR" Clause.
Regards
RJ

I don't like it, but you could use a hint:
SQL>r
1 SELECT A.ID, B.VMONTH
2 FROM RTEST1 A , RTEST2 B
3 WHERE A.ID = B.ID
4* AND ( (A.ID = B.VMONTH) OR ( B.ID = A.VMONTH ) )
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=94 Card=2 Bytes=28)
   1    0   TABLE ACCESS (BY INDEX ROWID) OF 'RTEST2' (Cost=94 Card=1 Bytes=7)
   2    1     NESTED LOOPS (Cost=94 Card=2 Bytes=28)
   3    2       TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   4    2       BITMAP CONVERSION (TO ROWIDS)
   5    4         BITMAP AND
   6    5           BITMAP CONVERSION (FROM ROWIDS)
   7    6             INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
   8    5           BITMAP OR
   9    8             BITMAP CONVERSION (FROM ROWIDS)
10    9               INDEX (RANGE SCAN) OF 'RTEST2_IDX1' (NON-UNIQUE)
11    8             BITMAP CONVERSION (FROM ROWIDS)
12   11               INDEX (RANGE SCAN) OF 'RTEST2_PK' (UNIQUE)
Statistics
          0 recursive calls
          0 db block gets
     300332 consistent gets
          0 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed
SQL>SELECT /*+ ordered use_hash(b) */ A.ID, B.VMONTH
2    FROM RTEST1 A, RTEST2 B
3   WHERE A.ID = B.ID AND(A.ID = B.VMONTH OR B.ID = A.VMONTH)
4 ;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=175 Card=2 Bytes=28)
   1    0   HASH JOIN (Cost=175 Card=2 Bytes=28)
   2    1     TABLE ACCESS (FULL) OF 'RTEST1' (Cost=20 Card=100000 Bytes=700000)
   3    1     TABLE ACCESS (FULL) OF 'RTEST2' (Cost=20 Card=100000 Bytes=700000)
Statistics
          9 recursive calls
          0 db block gets
        256 consistent gets
        156 physical reads
          0 redo size
        252 bytes sent via SQL*Net to client
        235 bytes received via SQL*Net from client
          2 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
          2 rows processed

How can I design a BPM with mulitiple IDOC types as sender

Similar Messages

Maybe you are looking for