How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now.

Similar Messages

HT201250 my Imac doesn't read my cd's!!! "cd in blank" I can't solve it. any ideas?

my Imac doesn't read my cd's!!! "cd in blank" I can't solve it. any ideas?
When I insert it says Cd not readable " I bought a bunch of cd's and I need them a lot to study!! please any help will be thankful

1. Clean the CD.
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
3. Try another brand CD.
Best.

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

hi i've just signed up for lightroom and when i go into the develop screen i get a blue screen with a cross through it and it says cant load picture. any idea how to get around this?

I'm having same problem in develop module which is laggy as hell compared to LR5.8
Library module is fine but develop module is slow as hell....5 seconds to make ANY adjustment.

How can we disable the OSX Access Point functionality without disabling all wifi.

Curious if anyone knows a way in Lion/Mountain Lion to disable the OSX access point features.
i have about 50+ macs in our company for iOS development. lately we've had a lot of rogue AP's showing up, people bridging the internal network by activating the "become a hotspot" feature in OSX. this is a *GREAT* feature, don't get me wrong. especially the latency and ease of use.. but in our case its causing problems, and i'm looking at a way to disable the AP features without disabling ALL wifi with something like.
/usr/sbin/networksetup -setairportpower en1 off
this is a bit too much ,it disables the entire airport/wifi. we want to only disable the access point capabilities.
any hardcore guru's out there have some advise?
TIA!

Enabling sharing services requires administrative access, so one option is to set this and only give folks standard "managed" access. The Internet Sharing service is a process called "InternetSharing" that runs as the root user and establishes all the appropriate services for the needed connection. You could technically remove or even rename this process on systems to prevent it from being used, or remove or disable its launch daemon. These files are in the following directories:
/System/Library/LaunchDaemons/com.apple.InternetSharing.plist
/usr/libexec/InternetSharing

We are creating a photo book and on the cover in the lower right hand corner there is part of the title. We did not create it and cannot find how to delete it. Any ideas.

We are creating a photo book and on the cover in the lower right hand corner there is part of the title. The cover title is centred below the cover picture. We did not create it and cannot find how to delete it. Any ideas?

Preview according to this article and see what it does. http://support.apple.com/kb/PH2486
The printed book will match the preview
LN

Apple tv is not working: "an error occurred loading this content. Try again later". Any idea?

My apple tv is not working. I have rented 4 movies and I cannot open any of them. My Apple TV is located in USA. Anywy I am traveling at the moment outside US, but cannot watch my rented movies. I get the following error message: "an error occurred loading this content. Try again later". Any idea? What is the solution for this issue?

I have 4-5 mbps for Downloads. It works fine when opening websites and downloading large files from the Internet. I have set-up my IP to "automatically" as you suggested, even though I believe this was the default setting.
I changed the resolution in Settings > Itunes Store > Video Resolution from 1080p to 720p. Then I rented again "Salmon Fishing in the Yemen", (but now using HD 720p) and I get exactly the same error.
Then I changed it to Standard Definition and now is working. Basically what I have found out is that if I rent movies in HD 1080p or HD 720p it will simply not work.
I believe 4-5 mbps is very fast internet connection, so the errors above should not be appearing.
Feedback for Apple TV developers is to show estimated time for full downloads when using 1080p or 720p so the user can understand what is going on. Very frustrating as I just bought the Apple TV for watching HD movies. I have a 55" HD Sony Bravia tv ready to be used... !!!

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

I had my mac rebooted and now I can't find appleworks any idea where to download this?

I had my mac rebooted and now I can't find appleworks any idea where to download this?

"Rebooting" means restarting &, as fruhulda said, that won't cause things to disappear. If you mean you had the hard drive erased & the system reinstalled, you will have to find the original disk with the AppleWorks installer.

Everytime I open a comment tag 'pop-up,' the Thumb-Nail section opens, very annoying. Have tried everything I can think of. Any ideas? Thank you.

Every time (ALMOST) I open a comment tag 'pop-up,' the Thumb-Nail section opens, very annoying. Have tried everything I can think of. Any ideas? No other problems elsewhere, either in Adobe or Word or my entire computer for that matter. Very strange glitch. Ran several deep virus checks - nothing. Booted and re-booted. Entered different ways into Adobe, no help. Thought about my keyboard (wireless of course) might be doing it, but in other web-sites and in WORD - no problems.
I use WINDOWS 8.1. Also doubled checked my up-date status. Is there a chance that this is a continuing problem that is still being encountered from the last major Adobe up-date? Use Adobe for years with never a problem until the latest up-date. Parting thought, maybe just my batteries in my keyboard are getting low, or a really low threshold virus of some sort, no idea. Any help would be greatly appreciated.
Thank you! Charlie

these are the sites and the information that i followed and none of these things gave me a solution. i am still getting a second tab with every single window that opens. . . thank you for your help!
https://support.mozilla.org/en-US/kb/stop-firefox-opening-multiple-tabs-when-it-starts
https://support.mozilla.org/en-US/questions/959049
https://support.mozilla.org/en-US/questions/959413
https://support.mozilla.org/en-US/kb/firefox-repeatedly-opens-empty-tabs-or-windows

HT1296 When I try to sync I get a message that says "waiting for items the sync" then it just stays there and runs for as long as I keep it hooked up. Any ideas?

When I try to sync I get a message that says "waiting for items the sync" then it just stays there and runs for as long as I keep it hooked up. Any ideas?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?

At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

A former employee has returned a 17" MBP and cleared the OS. All attempts to reinstall are failing, start up disc, repower C pressed, Cmd-R etc - anyone any ideas?

A former employee has returned a 17" MBP and cleared the OS. All attempts to reinstall are failing, start up disc, repower C pressed, Cmd-R etc - anyone any ideas?

Did you have the original OS installation disk? If not, call Apple Customer relations and provide them with the MBP serial number (on the bottom) and they will send you replacements. There is a charge.
If this is a late 2011 MBP, the it came with Lion installed. Try accessing the Apple servers with OPTION COMMAND R keys held down at start up. The display should show a picture of a globe. Proceed accordingly. If no success, call Apple as already described.
Ciao.

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC

How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....

Similar Messages

Maybe you are looking for