How can I display a formula variable in the report?
Hi,
I have a requirement to display a formula variable value in the report. When the user runs a report this variable value should be called once and displayed below the report title or in a specified cell. Is it possible something like this could be done? if yes, can someone tell me how can I achieve this functionality. I appreciate your time and effort with points.
Thanks,
Rao.
Hi Bhanu,
In the query properties you can only see text variables and not the formula variables. If I define my number of working days as text variable and I can display in the report. However, I need to use this variable in some calculation in the report, so it has to be formula variable in order to use in calculations. I appreciate your input with points.
Thanks,
Rao.
Similar Messages
-
How can i define a boolean variable with the condition if i got a specific text on a selected column?
Example:
my select results:
[id = 102] [Company = 'Microsoft']
If i got microsoft in 'Company' i want to my another table with the columnName "Microsoft" get "true".
Can you help me?That is called 2-table UPDATE.
Example:
http://www.sqlusa.com/bestpractices2005/updatewithcorrelatedsubquery/
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx 554 KBHopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know. -
How can i display a list of all the names stored in the Mail app?
When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred -
How can we pass a formula field of Main report to SubRepor's Parameter. in CryastlReport 11
Post Author: Nikhil
CA Forum: General
Hi
Crystal Report version : 11.0.0.1282 Standard
There is MainReport1. Other is Subreport1
Scenario :
MainReport1 having paramater PdateMain1 as dateTime.
SubReport1 having parameter dateSub1 ,dateSub2.
datesub1 is used for One datasource1 (DataSource- XML -from webApplication) , dateSub2 is used for datasource2 (DataSource-SQl Procedure ) ( This is requirement as i need to used two datasource )
Value of datesub1 and datesub1 is same (it is created automatical as it is part of SQLProcedure and XML Query ) but get prompted twice for the same valuewhich is not desirable. so for that i have created main report and calling this subreport in main report.
Now i want's to pass PdataMain1 to Parameter datesub1 and datesub2. I am able to pass PdataMain1 to datesub1. through Change Sub report link ( Option on right click of report).and it is working fine,
Problem :
But Subreport link Menu does not allow to bind PdateMain1 to datesub2 as it is allready bind with datasub2.
to overcome this i created one Formula field in main report as fMaindate1 which copy date from Parameter PdateMain1.and bind ( link) the fMaindate1 to datesub2. when i link this , subreport does not display any thing at all. It it a limitation of crystal report or i am missing some thing , Is it like that we can pass formula of ,main report to subreport Paramater in Crystal 11 Standard , if we can anyone please Provide help on this.
This can be easily achieve through application programming but my need to get this done in Report itself.Thanks
Nikhil PatelPost Author: Jagan
CA Forum: Crystal Reports
Shared variables. Looked in the help at variables - shared -
How can I display date+time and not the point number in excell?
Hi everyone,
Could anybody tell me how I can save date + time to a file, so that I can display on a diagram(excel) : date+time in (ox) and data (oy)? :
My program sets in (ox) the point number and not the date+time....( although date and time are written correctly in the column...)
Any help would be great,
Thanks,
regards,
Marchi there,
excel uses 01.01.1900 00:00 as the time offset, LabVIEW uses 01.01.1904 02:00, so you can't display the correct datetime in excel when you write the time as a fractional number of seconds from LabVIEW. you must format the datetime in LabVIEW to a string and write that to the column. use the "Format Date/Time String" - function and for example "%d.%m.%Y %H:%M:%S%3u" as the format string (see the functions help for more examples). you also could format your data to a string using "Format Into String" - function and write the file as a 2D string array. the decimal point you have to use depends on your system and its settings, but you can specify the decimal point in the Format string like "%.;%f" (means fractional number with point as decimal point).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
How can I include a captivate variable in the URL of the website widget?
I am using the website widget to bring up some customized content during the course.
The URL contains a variable which will be different for every user.
I can't find the option of including a variable in the URL with the widget.
Has any figured out how to accomplish this?I am using Cp8.
I publish in both swf and html5 formats so that the course functions on all device platforms.
A swf only solution would preclude IOS since it doesn't support flash. -
I'm trying to display extra information in my Order Receipt page by passing a value in the URL from the Order Registration form.
The parameter is adding to my URL and the form is processing as expected, but I can't seem to pull that value out of the URL to display on the page.
I've used {module_url, myValue} but it comes up empty.
Am I doing something wrong or can you not use this module in the Order Receipt page?Thanks Liam. Another thing BC could look at implementing is more flexibility with the E-Commerce layouts
-
How can I display a CreateTimeSpan variable?
I am trying to figure out how to properly output a variable
that was created using CreateTimeSpan in a readable format. Here is
the initial code:
<cfset MyTime = #CreateTimeSpan(0,0,30,0)#>
And lower on the page:
<cfouput>#MyTime#</cfoutput>
Which unfortunately results in showing this:
0.0208333333333
But I want it to show as
30 minutes
Without going into too much detail, the short is I am trying
to output this for the user and only need to know how I can format
0.0208333333333 to the appropriate amount of time *i.e. 30 minutes,
2 hours 30 minutes, 2 days, etc.
Any help on this is greatly appreciated!Well you weren't as far off as you think :). Initially I was
going to want to do it so it dynamically figured if it should
display as days, hours, minutes, etc....but I decided that was good
enough for the moment.
Also I do intend to allow the admin user to indicate the
timeout value, but not as you might think. Basically I have an
/install/ folder which will automatically launch if value on
application.cfm
<cfparam name="application.install" default="FALSE">
Within that set of self contained pages, it will take them
through a series of questions and the end results will:
1. Test database connection.
2. Allow them to indicate whether they want to offer support
or not (i.e. can indicate a support email address and if so, then a
support form shows within the admin tools + sends out automated
emails on any errors).
3. Allow them to indicate their own time out value.
Upon completion of all of these things, it will then either
write to the application.cfm OR if CFFILE is turned off, give them
the code to copy and paste into the application.cfm, save and
upload...which in turn includes the timeout variable.
I am extremely thorough on my applications and previously at
bottom of the page had it hard coded as "will time out in 30
minutes" but decided that should be determined during install and
dynamically show.
Have lots of work to do on that application before launch
yet, so I didn't want to waste too much time on that single item
:). THanks again! -
How can I display to a projector using the VGA adapter?
Using a VGA Adapter to the Thunderbolt connection, I can display a Keynote presentation just fine, but I cannot seem to display the screen to project an internet page to a group of people. Is there some trick to this?
From your description my guess is that you need to open System Preferences and select the Displays tab. Then click on the Arrangement tab and in the bottom right hand corner click on Mirror Displays. My guess is that at the moment your display setup is for 2 separate displays, 1 for the computer and 1 for the projector.
-
How can we display below mention control in the selection screen
I want to display a container in the selection screen. (the container which we can use/get in the alv out put when we select a ascending/decending sort buttons for filtering of sort order).
thanks in advance.
sreesimply at selection-screen output. event do the following coding.
1. create a docking container
2. create you control on to the container.
create object docking
exporting
repid = repid
<b>dynnr = sy-dynnr</b> side = cl_gui_docking_container=>dock_at_right
extension = '200'
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if editor is initial.
create object editor exporting parent = docking
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = 256
max_number_chars = 100000.
endif .
Regards
Raja -
How can I display an e-mail when the message is in HTML?
I occasionally receive e-mails whose messages are in HTML.
They're unreadable unless I save them outside thunderbird as files with the .html extension and open them in firefox.
Is there some less cumbersome way of reading them directly in thunderbird itself?
Linux Mint Debian EditionView - Message Body As - Original HTML
-
How can you display only one artboard in the Navigation Panel?
I would like to be able take advantage of the Navigation Panel as a thumbnail view of the artwork I am illustrating. The Adobe Illustrator file has 5 art boards. Is there an option in the Navigation Panel to view the art board I am working with, alone?
> That could work if all of the group items were the same size.
Why would that matter? Each GroupItem has its own controlBounds, height, width, position properties. Each Document has its own height, width, pageOrigin properties. The script would reference those properties to position the Group in the center of the document.
JET -
How can I display Group By-Value in the Bex Report
I have a report values looks like below,
Month BALANCE
04/2005 $ 188.00
11/2005 $ 188.00
11/2005 $ 180.00
12/2005 $ 194.00
12/2005 $ 196.00
01/2006 $ 182.00
01/2006 $ 376.00
02/2006 $ 184.00
02/2006 $ 192.00
I am expecting the results
Month BALANCE
04/2005 $ 188.00
11/2005 $ 368.00
12/2005 $ 390.00
01/2006 $ 558.00
02/2006 $ 376.00
Group by Month .(not a result value)
Please advise on this.
Advance ThanksRows - Calendar Year/Month
Keyfigure Structure in the Column
The below fields are in the column
BALANCE
No.Of .Days
0-30 days
31-60 days
Still I am getting the value
04/2005 $ 94.00
11/2005 $ 94.00
$ 90.00
12/2005 $ 97.00
$ 98.00
01/2006 $ 91.00
$ 188.00
02/2006 $ 92.00
$ 96.00
Balance needs to Sum /group according to the date value.
01/2006 has value 91 and 188.I am expecting 279 .
Please provide some tips.Thanks for help. -
How can i display the values in the vector in a jsp using jstl
in a task i am recieving a vector in a jsp... how can i display those vector values in the jsp using jstl.... plz help me
thanks in advance<%
here you got vector say; v
pagecontext.setAttribute("varname",v);
%>
<c:forEach var="i" items="${varname}">
<c:out value="${i}">
</c:forEach>
Maybe you are looking for
-
Vendor Evaluation - Underdelivery Tolerance for Qty. reliability Criteria
Hi experts. When using Underdelivery tolerance in a PO, the Evalation criteria Qty. reliability is not taking into account this tolerance and give a vendor a score based on the requested qty. It doesn't make any sense to me, since I'm allowing the ve
-
Running Apps indicator in Dock has disappeared
Hi Up until 10.4, there was a marker in the dock (I think it was a small black triangle) showing which of those apps was running. It was a very quick way to check/quit apps you're no longer using. Has this been removed in 10.5?... I've checked Dock P
-
Strange runtime result on forms 10g
Hi, I am using forms 10G. Db is 10G. When I run the simple Scott's emp table It runs on internet explorer and instead of giving emp table information it shown something like that: <html> <head> ORACLE FORMS.</head> <body onload="document.pform.submit
-
Not able to open and see an attachment in an email message in finder
When I drag an email message form mail to the desktop. I can open it but not the attachment how to solve this? When i click on the email message that i have dragged to tthe desktop it opens in text applicatiion. But i do not see the attachment any m
-
Any idea why a 3 month old Ipad will not turn on? It has been charged and I haved tried the sleep/mute button and the on/off button on the front. Nothing is happening. It was working fine last nigh?