How can I divide a sheet to pages in numbers 3.0.1

How can I divide a sheet into pages. I have numbers 3.0.1

Hi m,
Numbers does not have (nor has it ever had) page breaks or Set Print Area.
Numbers 3 has lost Print View and Layout View, so it is rather clunky to swap between File > Print (to see Print Preview) and your document.
You can, however, move tables to new sheets and print only those sheets that are relevant. For example, your main data table could be on one sheet (that you choose to not print) and a summary table with perhaps a chart on another sheet (that you do print).
I hope this helps.
Regards,
Ian.
Message was edited by: Yellowbox. Changed 'Set Print View' to 'Set Print Area' to conform with Excel-Speak ;-)

Similar Messages

  • How can I divide a A4 size page into 4 equal parts ?

    How can I divide a A4 size page into 4 equal parts, so that I can write individually on each part. that is 4 separated column : 2 columns on upper half of the page and 2 columns on lower half of the page. I only know how to create 2 column on a page but do not know how to create "2 rows', thank you

    I would use text boxes but you could use Layout breaks and column breaks, but is more of a hassle. I am not a fan of a lot of text in tables.

  • HT204394 How do I delete a sheet tab (page) in NUMBERS ?

    How do I delete a sheet tab (page) in NUMBERS ?

    HI Jim ..
    Try this discussion >  Re: How can I remove a sheet in Numbers?

  • How can I create a checklist in Pages (not Numbers) ?

    Hello all,
    Just curious if ANYONE out there has figured out how to implement a checkable checklist in Pages.  I am familiar with the Checklist template in Numbers, but it is not very pretty, for lack of a better word.  I need to create a stylish checklist in Pages that I can email out to employees, they can fill out, and send back.  Any suggestions?
    (I am also familiar with the check boxes in the Image Bullets section of Inspector, but it is too complicated for some of my less tech-savvy employees to go change the bullet for each line they need to check off - not to mention a hassle.  The intuitive thing would be for them to be able to simply click on the empty box, at which point a check would appear.  Please help.)
    Thank you!
    Jen

    The clean soluce is to build your own template matching your taste in Numbers.
    Yvan KOENIG (VALLAURIS, France) samedi 23 avril 2011 11:06:02

  • I have nearly 6000 .cwk documents - some word and some spreadsheet.  How can I mass convert these to pages and numbers?

    Have been using Mac from early on.  My present MacBook Pro has 3 previous computers and information installed on it.
    The question is, I have been using Appleworks/Clarisworks for years for my business.  Would like to save that history before moving to Lion.  I know you can convert the files individually from .cwk file to pages, but I have nearly 6,000 files to convert.
    Is there some way to convert them to pages and numbers  or .doc files in mass?

    Hello
    good answer here - but in french
    http://icp.ge.ch/sem/utilisation-logiciel/spip.php?article446
    lotoff script for applework convertion
    here https://public.me.com/koenigyvan/fr/
    and https://discussions.apple.com/thread/3162022?start=0&tstart=0
    HTH
    Pierre

  • How can I divide my page (in Photoshop) perfectly in to 4 or 5 sections?

    How can I divide my page (in Photoshop) perfectly in to 4 or 5 sections?
    I'm sure there is a better way to do it than to do maths and measure your screen..
    Thank you~

    It is a wee bit non intuitive.  This will help get you started:
    The bottom row of icons are
    Center Horizontal; Center Vertical, Create Guides, Clear Guides (hold down to clear fields), create new set.
    The size fields are the same as your units, so what I do is Right click a ruler and select what I want (Cms or Pixels).
    Some combinations take some working out.  This image is 800x600 pixels, so I have a 20 pixel margin all round.  Four columns, with a 20 pixel gutter between the columns.  GuideGuide just works it out and lays down the guides.  How useful is that?!
    Column width can trip you up if you don't think what you are doing.  100px into an 800 pixel wide image results in eight columns.  If I had entered a value o 10, then I'd have had 80 vertical guides!.  I am sure you'll have the entire picture from here.

  • How can I view more than two pages at a time?

    How can I view more man two pages at a time?
    As a muscian reading digital sheets on Reader, being able to veiw as many as 3 to 5 pages at a time would be more helpful. Also, if it was possible to view any number of pages at time such as pages 1 and 2, 2 and 3, 3 and 4, or 5,6,7,and 8 instead of just 1 and 2 or 3 and 4 etc. my experience would be even better. thanks.

    The only way I could make Reader show 4 pages was to
    set View to 2 pages scrolling
    zoom out to display four pages:
    But for me that it to small to read anything...

  • How can I divide one big long track into several smaller ones?

    I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
    How can I divide one big long track into several smaller ones?
    Any input would be great.

    lakergrl wrote:
    How do I split one very long track into several tracks (audio journal split into each day)
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • Urgent....How can i redirect to my jsp page from servlet in init() method..

    How can i redirect to my jsp page from servlet in init() method..Becoz that servlet is calling while server startsup..so im writing some piece of code in init() method..after that i want to redirect to some jsp page ...is it possible?
    using RequestDispatcher..its not possible..becoz
    RequestDispatcher rd = sc.getRequestDispatcher("goto.jsp");
    rd.foward(req,res);
    Here the request and response are null objects..
    So mi question can frame as how can i get request/response in servlet's init method()..

    Hi guys
    did any one get a solution for this issue. calling a jsp in the startup of the servlet, i mean in the startup servlet. I do have a same req like i need to call a JSP which does some data reterival and calculations and i am putting the results in the cache. so in the jsp there in no output of HTML. when i use the URLConnection i am getting a error as below.
    java.net.SocketException: Unexpected end of file from server
    at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:707)
    at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:612)
    at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:705)
    at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:612)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon
    nection.java:519)
    at com.toysrus.fns.alphablox.Startup.callJSP(Unknown Source)
    at com.toysrus.fns.alphablox.Startup.init(Unknown Source)
    at org.apache.tomcat.core.ServletWrapper.doInit(ServletWrapper.java:317)
    so plz do let me know how to call a jsp in the start up of a servlet.
    Thanks
    Vidya

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can I open the EP login page in the same pop-up window?

    is it possible for me to using / only one window(Browser) pop-up to EP Page(Login or iView...).
    In the firs general html page I create a EP login page link action[eg. "window.open('url', 'target_name')"],
    but always launching new pop-up window(Browser).
    How can I open the EP login page in the only one window(pop-up)?
    Could anybody help me by giving suggestion and codding?
    Thanks,
    jin.

    Hi,
    if you want to redirect the root of portal system (http://portal/) to the login page, edit the
    file and change the body tag as follow:
    \usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\index.html
    <body onload="location.replace('irj/portal' + document.location.search)"></body>

  • How can I add an existing cfm page to a project?

    CFB3 Question: How can I add an existing cfm page to a project? I created a project and copied a file into the project folder but I can't seem to find a way to add the cfm file into the project.

    @Carl - Well heck, yes I did... But after reading your response I went back and tried right-clicking on and refreshing different things and what worked was right-clicking on the project name in the Navigator window and then clicking on refresh in that context menu.
    Thank you Carl!

  • How can I delete an old web page ??

    How can I delete an old web page ?? I have created a web page some time ago and now I want to delete it but i do not know how to do it: can anyone help me ?

    Delete the web page where it is published.
    If it is published to MobileMe, then you need to log into MobileMe and go to your iDisk or mount it on your desktop and then delete it from your Web/sites folder.
    If you have published to a server, then you'll need to download Cyberduck, Filezilla or Transmit - all dedicated ftp programmes to connect with your host/server and then delete your old files from the server.
    It really is not hard.

  • Did the update to OS 5...synched all my apps..then only 11 pages of apps are visible..the others are invisible..If I move an appfrom the 12 plus pages in itunes to a lower page...It becomes visible....WHY?..How can I get all 20 plus pages visible?

    Did the update to OS 5...synched all my apps..then only 11 pages of apps are visible..the others are invisible..If I move an appfrom the 12 plus pages in itunes to a lower page...It becomes visible....WHY?..How can I get all 20 plus pages visible?

    OK....First,you are right, OS 5 has the 11 page limit....you must create folders of Apps until you get below 11 pages of combined folders and apps...NOTE.....the upgrade to OS 5 killed all of my old folders and folder organizations...this may be an issue for all????.....I have over 300 apps so when the old folders went away...I was left with 20 plus pages....only 11 visible....It took me awhile to find out what happened....Since I have 64G it seems that 11 visible pages is a silly limit since the apps are on the machine...

Maybe you are looking for

  • Registering multiple iPods on same computer

    I currently have a 4G 2nd generation iPod that is registered to our computer. My husband just received a 4th generation iPod. Can you register multiple iPods onto the same computer? My other question is if you purchase a used iPod, how do you registe

  • Can not view (some) emails with attachments

    There has already been some discussion about individuals getting the "This message has not been downloaded from the server" error. http://discussions.apple.com/message.jspa?messageID=4983643 Has anyone found a solution to this problem? I am using GMa

  • Table height in layout development

    Hello there,                I have defined a table in the layout which has a header and a row. Now, I have another table is displayed (using repeating subforms not with standard table layout). When my data is getting printed, if the inner table is bl

  • MacBook Pro Mountian Lion, security update, process bar opens but does not download, how to fix?

    Firefox says there is an important security update and when I click the update the blue bar appears and just spins and never moves. I let the laptop sit for a whole day and still nothing. I have to close the update box. I updates to mountain lion abo

  • Schema password

    Hello, Is there any method or a way to get the schema password from the ifs environment?. While starting ifs server, one has to to keyin a adminuser id, password, service name and schema password. My question is, is this information stored? if so, is