How can i do a  NW07 double stack system to standalone java engine

Hi all,
i need a hand to this task.
So i have an Abap (BI) + Java (EP) double stack system which connect to an other Abap (BI, this is the backend system). The abap system from the double stack is useless. So i would like to reduce the double stack to the standalone java. Is there anyboday have any experiance to how to do this?
I have tried to export as standalone and double stack too, the source system but at the install only JAVA i have got an error message:
"Importing the Java dump from a double stack system into a Java Only system is not supported."
So my question is , how can i export the java db from the double stack system for the new only java system?
I hope some of them have an idea....
Thank you very much for your help,
Beeekaa

Beeekaa,
You are trying something very interesting. I have never done it myself but I think below steps may work.
Source system: ABAP + Java system.
Export only java using database specific tools u2013 this will export only SDM content.
Take a database backup u2013 Here you will backup all the tablespaces including ABAP tablespaces.
Target system u2013 Java only.
Restore the database. Delete all the tablespaces other than SAPSR3DB.(this is where we have Java content)
Launch SAPINST and try to import java, so that you will get the SDM content and it runs Java migration tool and changes the JAVA ID that we see in configtool to new number.
Again I am just assuming here, I have not tried it.
Thanks,
Venkat.

Similar Messages

  • How can I delete automatically all double photos in the library of iPhoto? jos vdp

    How can I delete automatically all double photos in the library of iPhoto? jos vdp

    Two apps that I've tried and work very well are  iPhoto Library Manager and  Duplicate Cleaner for iPhoto
    OT

  • How can I authenticate users against a WAS system from third-party app?

    We are looking at developing a third-party standalone web application e.g. in Rails (but it could be on any framework for that matter).
    How would we go about authenticating users against a SAP WAS backend? Are there some standard web services for this? What other means are there for authentication?
    Kind Regards,
    Martin

    From the comment in SUSR_LOGIN_CHECK_RFC you just need to pass user name and it will return if user can still log on. Only your system will know credentials for this user so an attacker won't be able to use this service for cracking passwords.
    This FM is in the same function group as:
    CREATE_RFC_REENTRANCE_TICKET
    SUSR_CHECK_LOGON_DATA
    SUSR_DELETE_OWN_PASSWORD
    SUSR_GENERATE_PASSWORD
    SUSR_GET_ADMIN_USER_LOGIN_INFO
    SUSR_GET_X509CERT_MAPPING_LIST
    SUSR_LOGIN_CHECK_RFC
    SUSR_USER_CHANGE_PASSWORD_RFC
    SUSR_USER_EXTID_DEL
    SUSR_USER_EXTID_GET
    SUSR_USER_EXTID_GET_ALL
    SUSR_USER_EXTID_LOOKUP
    SUSR_USER_EXTID_RENAME
    SUSR_USER_EXTID_SET
    SUSR_USER_EXTID_SET_ALL
    SUSR_USER_FROM_CERTIFICATE_RFC
    SUSR_USER_SETEXTID
    You would need to ensure that only the service exposing the "login check" can be called, and not the FM's in the group.
    BTW: SAP Java WAS can provide SAML 2.0 assersions (technically a component shipped with IdM, but you don't have to use the rst of the IdM if you don't want to..). If your applications are all web enabled ones (WDA?) then that is an option to consider, which is also strategically supported.
    SSO2 Logon tickets are not really a strategy anymore... and installing a double-stack system on all ECC sytems just to have SAML is not strategic either.. 
    I have heard several wishes for SAML authentication for SAPGui, but not seen anything official yet in that direction.
    Cheers,
    Julius

  • How can I get back to default in System pref/ displays/ color. iMac 10.9.5

    How can I get back to default in System pref/ displays/ color?  iMac 10.9.5

    Select the iMac option.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed.  I need this so how can I go back to the old system?

    Restore from the backup you had prior to installing Mavericks.
    However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

  • How can I see /SMB40/RVADOR01 in my system

    Hi All,
    I ahve one more issue or problem mentiond below :
    /SMB40/RVADOR01 is the SAP-standard (SAP-SMART FORM) driver program for Sales Contract.
    /SMB40/SDCON_A is the SAP-standard SAP-SMART FORM form for Sales Contract.
    I dont have /SMB40/RVADOR01 in my system but i have /SMB40/SDCON_A in my system.
    i m working on SAP 7.10 version.
    How can I see /SMB40/RVADOR01 in my system.
    give me SAP note no.
    Thanks
    Regards
    SANJAY CHOBDAR

    >
    SANAJY CHOBDAR wrote:
    > How can I see /SMB40/RVADOR01 in my system.
    > give me SAP note no.
    If it's not there, then you can't see it.
    If you need a note number: go look it up yourself.

  • How can I revert to a previous operating system on my Ipad

    How can I revert to a previous operating system on my IPad

    Have you checked to see if they have updated their app or are planning to do so?

  • Installed office for mac (trial version). now I got 2 excel files, which cannot be deleted. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion(with win 7 parallel)

    now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)

    The people who make that stuff have their own forums you can also search/ask in:
    http://answers.microsoft.com/en-us/mac/forum

  • OBN: How can we add the tcode of target system into Source System.?

    Dear Experts,
    I want to add a t-code ME53n of ERP) into a role as OBN target in my SAP TM.
    I tried to add this t-code but could not find this t-code in SAP TM system.
    How can we add the tcode of target system into Source System.?
    I tries to import the role of target system but that does not work.
    Please help!
    Regards,
    Saurabh

    Hi Saurabh,
    Logically there is no need to add a tcode of the target system in the source system.
    If you have right roles in the system then system should allow you to add tcode in the OBN target simply by going to PFCG roles and using add transaction feature.
    To make sure it works properly you have to check the Method & Parameter assignment to the newly added tcode.
    Thanks & Regards,
    Tarun Kumar

  • Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

  • How can I set document date automatically as system date?

    I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
    How can I set document date automaticall as system date?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara, Turkey

    Hi Expert,
    Please refer the below link..
    Document date to be defaulted as system date for all FI transactions
    as there mentioned, please go to T-Code: SHD0.
    Regards,
    GK
    SAP

  • How can i enable ldap service in my system?

    How can i enable ldap service in my system?while running my prgram i am getting an error connection refused why?

    hi
    thanks for u r kind attention.
    i want execute simple jndi program on WinXPwhich uses ldap sevices.
    in the JNDI Tutorial it is given that u can make use of ldap service provided by JDK.i am using a latest version of jdk.
    where the programs for enabling ldap sevice is located in JDk ?how can i enable it?
    and also i have down latest releases of openLDAP software?if the earlier is not possible u tell me how to configure openLDAP?
    thanks in advance

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • How can we find workflow templates activated ina system ?

    how can we find workflow templates activated ina system ?
    Could you please tell me a table name for that ?
    thanks

    Hello ,
    I need the active workflow templates regardless of business object,event or template etc
    So I used method suggested by Mohammad Anwar  and checked the table HRS1205
    Here I find a long list of active workflow templates
    But further to that I need to find which workflows have been activated and implemented to meet business requirement and put to use in the system.
    For this I checked the SWI1 in production system to get an idea of what all workflows are active.This will give day to day data.
    But if I need to find the same in HRS1205 table then can I consider those entries of active workflows for which UNAME field is not standard SAP userID but a dialog user ID of any user ?
    thank you

  • How can I see whatever I print through System.out.println in my servlets when I use iplanet 4.1

    how can I see whatever I print through System.out.println in my servlets when I use iplanet 4.1

    Hi Nitin,
    Look out the below link, Hope this helps you.
    http://knowledgebase.iplanet.com/ikb/kb/articles/4235.html
    http://knowledgebase.iplanet.com/ikb/kb/articles/4790.html
    http://knowledgebase.iplanet.com/ikb/kb/articles/4699.html
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

Maybe you are looking for

  • Drop-down list in editable ALV

    Hello all, Does anyone know how to display the values instead of the internal values when using the alias table to specify a drop-down list in an editable ALV grid ? Apparently the BC_ALV* examples have the same problem. thx Pieter

  • Shorten a script, add a repeating action to a handler

    Really not sure how to do this, but I have script that processes an image. The thing is has the same action repeating over again yet there is very little difference Everytime they have a different width to be sized to dependant on the brand, so this

  • DART: FTWL displays only 100 lines

    Dear DART experts and users, I wanted to display the extracted data from the data extract browser (FTWL), using the "Display Appl. Server Files" button (or feature), but it displays only 100th lines.  Have you ever run into this and what was the solu

  • Treeview in Javascript

    Hi all, Can anybody send me the code or link for a treeview script written in jvascript....i need to incorporate a tree display and have no time to write my own code for that. so i request plz help me. Abhinav

  • How to setup in-process report server 11g on linux for destype=mail

    Currently, getting Error when send report as an email attachment destype=mail. Is there any thing missed out during Mail server configuration? REP-50159: The report generated successfully but distribution to destinations failed. REP-50152: Destinatio