How can i download these jar files to load SQL server derive

Hi
pls tell me how can i download these jar files and from what site i can do that to enable to load SQL server driver
msbase.jar
msutil.jar
mssqlserver.jar

if u use sqlserver 2000 u can download for free from microsoft.com
and other sites are freetds.com i guess

Similar Messages

How can i run a jar file as EXE on mouse click..

*{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*

amrit_j2ee wrote:
*{color:#0000ff}how can i run a jar file as EXE on mouse click..is it possible in any way?????????{color}*Do you mean converting it from a jar file to an EXE file or do you mean that you would like to run the application by just double clicking it?
If it's the latter then you need to make the jar file including a manifest.
The manifest can be just a txt file with its content to be something like this:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: Somebody
Main-Class: NameOfTheMainClass
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildTo make the jar file including the manifest, use something like this in your command prompt (of course you must have compiled your java file(s) first):
jar cfm test.jar MANIFEST.txt NameOfTheMainClass.classAfter that you'd be able to run your application just by double clicking it.
If you're a NetBeans user, you can build your standalone application by right-clicking your project and then going to properties => run => and choosing a Main class. After that right click on that project and "Clean and Build", locate the jar file in the "dist" folder and double click it =]
Hope it helps,
LD

How can i rename a jar file using only java code

i have tried everything i can think of to accomplish this but nothing works.

ghostbust555 wrote:
In case you geniuses haven't realized I said I tried everything I can think of not that I tried everything. So help or shut up I realize that I didn't try everything but if you can't figure it out either DO NOT POST.
And the question is how can i rename a jar file using java code? As it says in the title. Read.I would tell you to use the File.renameTo method, but surely that would have been obvious, and you would have tried it already? But maybe you didn't. You were kind of lacking in details in what you tried.
And yes, I am a genius. Just don't confuse "genius" with "mind-reader".

From where can I download the jar files to use JAXB 2.0?

Hi all,
From where can I download the jar files to use JAXB 2.0?
~Regards

Does the government not let you do Internet searches where you live? My Internet search for "JAXB 2.0" returned this:
https://jaxb.dev.java.net/
as the first link. If you can't find it from that page it doesn't exist.

How can I download old .ram files

how can I download old .ram files?

Hi ..
Try this converter > ram file converter free download (Mac)

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

I've recently purchased an album, but it has not fully download.there is two songs missing. How can I download these two tracks? Please.

iTunes Store > Purchased > Music > Not on this computer.
tt2

How can I create a jar file

Hello!
How can a create a jar file?
I want to run an application just clicking in a icon.
How can I do this?
Thanks a lot.
K�tia.

Get to the command prompt
change directories to the directory where the main class resides.
Open your text editor and type the following in it:
Manifest-Version: 1.0
Main-Class: NameOfMainClass //Just name without ".class"!!!
Created-By: Your Name Here
Save this file as whatever you want to name it with ".mf" as the extension.
Then go back into the command prompt and type the following:
jar cfm "NameOfJarFile".jar "NameOfManifestFile".mf *.class
(without the quote marks of course)
Hit "Enter"
This will jar it up and make it executable.
If you have any images associated with the program you can add them in the same way as above. Just add *.gif or *.jpg after the *.class portion.
Good luck!
LEEMAX I. T.

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

How can I make sure that in RAM our sql server is not facing any mermory crunch issue?

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I tried to download video from RCA Small Wonder EZ201 to my new macbook pro. Macbook pro recognizes the device but then message appears that device was improperly ejected when it is still connected. How can I download these videos?

When I connect the RCA Small Wonder to my MacBook Pro, the device is recognized in finder as EZ201. I tried to copy the video files in the folder but within a minute or two, I receive a message that the disk was ejected improperly, even though the device is still connected. I was able to download the first few videos before it stopped working and was able to play them using Perian. However, when I tried to connect the device again, it froze my system and I had to force a shut down by turning the computer off. Why is the device initially recongized but then shows as improperly ejected when it is still connected? How can I download the videos if the MacBook Pro won't allow the device to stay connected?

A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
Do i have to make these Time Machines more open to connection?

HT5557 I have ibooks on my ipad that were downloaded under an old itunes account that is no longer active. How can I download these ibooks on other devices?

ibooks were downloaded onto my husband's ipad under a different itunes account (a @me account that is no longer active or accessible). he subsequently used our family itunes account. The ibooks he originally bought that are on his ipad I cannot access and I would like to be able to download these onto my ipad to read.
How can I access these books on my ipad?

Your best bet may be to try and connect that ipad to your itunes and go to file-devices-transfer purchases, and then see if you can add them to your device. I doubt this will work however as they have DRM that will tell you they dont belong to the account you're using.
It is likely you'll need to try and use the account they were purchased with to redownload them.

How can I download Adobe Proto files as a zip?

Hi.
I was wondering why I can only download Adobe Proto files as file type "Proto/.pro" I read that it would be possible to download a zip of the original via Creative Cloud giving me the css, jquery etc. of the wireframe.
It would be great if someone could help me out and let me know how it's done as I have no use for ".pro" files..
kind regards
Franziskus

Buddy seems to have a workaround posted on his blog http://www.lawryk.com/_blog/My_Adobe_Blog/post/Workaround_for_Opening_ Your_Proto_Files_in_Dreamweaver/
Plus adobe is working on a better solution

How can we call a jar files(seperate projects jars) to each link of the tre

how can we call a jar OR WAR files(seperate projects jars OR War) to each link of the tree.

i want have home page that have this menu
========================
-- Sale
--- Customer
--- Reader
-- Energy
--- Calc
-- Service
--- Chnage Name
--- Change Code
=======================
For example
--- Change Name
---- Page Reister
---- Page Confirm
---- Page Anoc
---- Page Save
======================
i want user to access to every page From Each Case(Change Name) .
i create for change name one project in my fushion web app and for other case
How to I Can Call Page register From change name in Menu of The home page ????
Edited by: user13151366 on Feb 4, 2013 4:44 AM

How can I download a .xlsx file using Numbers?

I'm new into Mac & I have no clue in how can I open a excel file .xlsx in a Mac...when I tried it showed the file was corrupeted. Anybody? Please.

It may in fact be a corrupted file, in which case you are out of luck. You could try opening it with LibreOffice and if that works, save the file as .xls and try the saved file with Numbers.
Jerry

How can i download these jar files to load SQL server derive

Similar Messages

Maybe you are looking for