How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

It depends, but it could either be the Grid or Pixel Grid under View>Show.

Similar Messages

  • How can I disable the system feature which automatically restarts applications i had open during a previous session ?

    How can I disable the system feature which automatically restarts applications i had open during a previous session ?

    When you log out, uncheck the box to reopen applications. If you're still using 10.7.3, then you will have to uncheck the back with each shutdown or restart.
    10.7.4 update was suppose to fix it that when you uncheck the box, it should remain unchecked for restarts after that.
    For the resume features, check this link:
    http://reviews.cnet.com/8301-13727_7-20083707-263/managing-mac-os-x-lions-applic ation-resume-feature/?tag=mncol;title

  • How can I remove the hover bubble that appears over tabs

    Using CS5, whan I have multiple images open, it open in tabs which I like. However, when I put my cursor over a tab, a bubble appears that says the exact same thin it does on the tab. However, with the bubble there I can't click on the tab beneath it to select it or to delete it.
    This is actually a huge problem when I make camtasia videos where I want to swith bettween tabs during a voice recrding because I can't select different tabs smoothly.
    How can I make it so nothing appears when I put my cursor over a tab (I want to keep using tabs though. This feature is great)

    I think it may be that John_Bone_Jones has the dpi scaling set rather high making the tool tips much bigger than normal.
    This how i normally see it in cs5 on windows 7:

  • How can I remove the recent pages which appear in the windows 7 screen preview

    by the windows 7 screen preview I mean the little preview screen who popup when I right-click the Firefox buttom in the Windows task bar.
    I do not ask about the browser History from the browser menu.
    Thank you,
    Pascal

    You can disable the Taskbar preview by setting the pref <b>browser.taskbar.previews.enable</b> to false on the about:config page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    See also http://kb.mozillazine.org/about%3Aconfig

  • Should be a simple one: how can I change the website pagename which appears in the browser?

    You see: after company there is a vertical line Design is Fun..... This should not be added. It appeared when I used a sample version, but I don't know how to remove it...
    Anybody?

    The problem was: how to change the "page title suffix"
    Sometimes knowing the name of the problem = solving...;-)

  • How can I eliminate the pointless top bar, close up the spaces between bars that are wasting space and reduce the depth of the tabs so that I have the space I had before for the websites I am looking at?

    I have updated to the latest form of Mozilla Firefox, and the top of the screen is altered so that it occupies far more space than it used to do, leaving far less space for what I want to look at. Why are there spaces between bars? Why are the tabs deeper than they used to be or need to be? How can I eliminate the pointless top bar which merely duplicates the information in the tab bar? Is there any way of simply restoring the previous arrangement?

    Okay, I accept that this is just how it is, and there is nothing to be done about it, because no-one except me thinks that the icons and toolbars should be organised to take up minimum space in order to allocate maximum space to the page.
    The crowning irony of all this is that, having updated to the latest Mozilla Firefox and consequently having this arrangement at the top of the page which I don't like, the middle of the page now comes up with its old message, 'You are not on the latest version of Firefox. Upgrade now.'
    Computers are very odd. :(

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • How can we find the Idoc number which posts the material document in SAP

    Hi All,
    How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
    Thanks
    Chandru

    Hi,
    In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
    regards
    suresh

  • How can we change the purchasing group which it is maintained in R/3?

    Hello All.
    In case of MM, purchasing group is assigned to material master.
    It means purchasing group is maintained based on material code.
    But SRM has different maintenance level.
    As you know that purchasing group has the responsibility based on material group (Product category).
    So we should change the purchasing group from R/3, when end user create shopping cart.
    How can we change the purchasing group which it is maintained in material master?
    Thank you,
    Best regards,
    SH.

    Hello So Hee,
    I am not a technical guy.
    But for your requirement i am building a logic.
    I am not sure whether it will work.
    You need to check with your ABAPER.
    It is as below:
    When the SC is approved and the other configuration is correct ,
    PR is created in ECC by the virtue of BAPI.
    You want that the pur grp should be populated on the base of matl code and not on matl grp.
    Hence in SC you will not fill up pur grp.
    In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
    This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
    Now in the BAPI you need to incorporate this additional value of yr pur grp field.
    So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
    Again: this is all hypothesis.
    That's all I can help you.
    BR
    Dinesh
    <b>Reward if helps</b>

  • How can we capitalize the PR/PO, which are already booked in cost center?

    We are creating a capital Project for our department.  We have the structures ready and finalized with the budgets. But, the department has already done some commitments and expenditures in their cost center .Now, this expenditure and commitment values needs to be reflected in the report, so that correct values of assigned and available should be updated.
    1) Pls. suggest a process using which we can transfer this amount. Is this to be done by an FI entry or else we need to commit using sanction request?
    2) How can we capitalize the PR/PO, which are already booked in cost center?

    Hi,
    As we know the Contract is an Outline agreement for Quantity or Value for a particular Period with vendor.
    Without mentioning Plant also we can make contract for the Purchase organisation level for particular Material for the entire period
    Where as while creating PR  -it is an Indent for the material requiement for the specific Plant so when you refer Agreement inthe PR creation time System will ask you how much quantity to what plant you want to place indent. where as In PO  it ia an legal document so when you refer Agreement it will take all the details from Contract
    i think you are clear with my points
    With regrads
    Shrinivas gangoor
    Edited by: Shrinivas Gangoor on May 22, 2009 2:53 PM
    Edited by: Shrinivas Gangoor on May 22, 2009 2:54 PM

  • How can I remove the lock screen from my iphone5s

    how can i remove the lock screen from my iphone5s. Please help.

    JModi wrote:
    I want to get home screen as soon as I click the top lock screen button.
    The "lock screen button" locks the phone. It will not take you back to the home screen. Thus the difference in the nomenclature for the "HOME" button and the "LOCK" button...

  • How can I keep the edited video which in project into Libray for re-edit ?

    How can I keep the edited video which in project into Libray for re-edit later ??
    As i used i movie 06 before....
    after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
    then edit it.
    After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
    But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
    I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
    or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
    please help!!! Urgent!!

    Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
    This way you are not eating up disk space.
    Does that help?

  • I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

    I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?

    http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
    Mac
    Operating Systems
    * Mac OS X 10.5
    * Mac OS X 10.6
    Recommended Hardware
    * Macintosh computer with an Intel x86 processor
    * 512 MB of RAM
    * 200 MB hard drive space
    For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/

  • How can I eliminate the bottom strip of icons from my ios7 4s iphone?

    How can I eliminate the bottom strip of icons from my ios7 4s iphone so I can the whole picture I've used as a wallpaper?

    You cannot remove the Dock. You can move the app icons off the dock, move others onto the dock and keep the dock empty but you cannot remove the dock.

  • How can I eliminate the four digit password I set for my iOS7?

    How can I eliminate the four digit password I set for my iOS7 wqhen activating the software?

    Your message was helpful, but I stumbled onto a missing step.  Settings>General>Passcode Lock>type in passcode #>OFF.
    I couldn't get to the off until I typed in my passcode again.....it Worked!  Thank you

Maybe you are looking for

  • Need a good music player for E51 supporting many p...

    Hi! friends,I am new in the mobile world and few days ago bought E51,being business phone it doesnot support many audio and video formats. Can anyone please tell me which music players should I install to support most of popular formats? Also please

  • Getting 'HTTP 500 Internal Server error'.

    hi, I am trying to run a simple hello world page from my PC, but I am getting an error saying 'HTTP 500 internal server error'. Please let me know is there any OC4J settings that i am suppose to modify. thanks and regards, Danish

  • Calibration Reports

    Hi Expert, I am new in QM Module. Let me know about Calibration report. My user requirement is - In Calibration report the system should show calibration due date. Is any standard reports available in SAP? or I have to develop new report. If develop

  • Updating to 7.10 disabled viewing pdf in browser

    updating to 7.10 disabled viewing pdf in web browser which is working normally in 7.09 no matter settings in preference, internet, are all marked to view pdf in browser and allow fast web view etc, every pdf links are opened in a new acrobat window w

  • Dell Inspiron 14 3000 Series won't complete Windows 8.1 Installation

    My daughter received this laptop yesterday. When she turned it on and started the installation on the Windows 8.1 she ended up turning it off by accident part way through the installation. Now we can't get it to install at all! It says something abou