How can I eliminate the pop up for sms. I have already turned off Preview.

How can I eliminate the pop up for sms. I have already turned off Preview.

You can't with the current iOS.

Similar Messages

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • How can I eliminate the four digit password I set for my iOS7?

    How can I eliminate the four digit password I set for my iOS7 wqhen activating the software?

    Your message was helpful, but I stumbled onto a missing step.  Settings>General>Passcode Lock>type in passcode #>OFF.
    I couldn't get to the off until I typed in my passcode again.....it Worked!  Thank you

  • How can I eliminate the pointless top bar, close up the spaces between bars that are wasting space and reduce the depth of the tabs so that I have the space I had before for the websites I am looking at?

    I have updated to the latest form of Mozilla Firefox, and the top of the screen is altered so that it occupies far more space than it used to do, leaving far less space for what I want to look at. Why are there spaces between bars? Why are the tabs deeper than they used to be or need to be? How can I eliminate the pointless top bar which merely duplicates the information in the tab bar? Is there any way of simply restoring the previous arrangement?

    Okay, I accept that this is just how it is, and there is nothing to be done about it, because no-one except me thinks that the icons and toolbars should be organised to take up minimum space in order to allocate maximum space to the page.
    The crowning irony of all this is that, having updated to the latest Mozilla Firefox and consequently having this arrangement at the top of the page which I don't like, the middle of the page now comes up with its old message, 'You are not on the latest version of Firefox. Upgrade now.'
    Computers are very odd. :(

  • How can I eliminate the space Pages inserts after an apostrophe?

    How can I eliminate the space Pages inserts after an apostrophe?

    egret wrote:
    Never mind.........I found out it was the font I was using (Song).
    Yes, best not to use Chinese fonts for other languages as sometimes the characters are especially wide or otherwise inappropriate.

  • How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

    Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
    A.:
    1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
    2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
    3. Click on "Next" to continue.
    4. Click on "Advanced".
    5. Click on "Create an ISO file for the recovery disc".
    6. Select the destination where you want to create the ISO files. (Default is the D: drive)
    7. The program will now create the ISO files. This process may take up to 20 minutes.
    8. Click on "Finish". Make sure the box is unchecked.
    9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
    10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    11. After burn is complete, click on "Close".
    12. Double-click the recovery_dvd2 file.
    13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

    Hi,
    You can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • How can i set the alternating colors for a table rows

    Dear All,
    Please any one help me how can i set the Alternating colors for Table Rows.
    i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

    Hi,
    The design property in Table properties should work for your requirement. Select "alternating" value for design.
    Please see the API below:
    design
    Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
    alternating - The table rows are displayed alternately in a different color.
    standard - The table background has one color. The individual table rows are displayed with grid net lines.
    transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
    Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
    Regards,
    Jaya.
    Edited by: VJR on Jun 17, 2009 6:43 PM

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address.  My other devices all have the correct address.  How can I get the correct address for my iPhone?  The only Apple ID that works for logging in is my new one.

    Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address.  My other devices all have the correct address.  How can I get the correct address for my iPhone?  The only Apple ID that works for logging in is my new one.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I activate the transfer rules for the ODS updating a data target.

    We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS  and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
    I then Replicate the datasource 80FIGL_O01.
    I must then <u><b>'activate' the transfer rules</b></u>.
    However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
    How can I activate the transfer rules for the ODS updating a data target.
    The error text is as follows:
    DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 02/15/2007 10:42:33.
    The time stamp in the BW system is 11/07/2006 13:11:54.
    System response
    The load process has been terminated.
    <b>Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
    Thanks for your assistance.
    Denny

    Hi Dennis,
           Try, using Business Content to activate your data source
           hope this will help you
    How activate business content?
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

  • How can I find the serial number for my creative suite CS6 I bought it from a store.

    How can I find the serial number for my creative suite CS6 I bought it from a store.

    https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
    Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    If you registered it with Apple check your registered items at Your Support Profile for Registered Purchases. Also, see iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking to usa a disk instead. Where or how can I download the software available for that, please reply

    I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking me to usa a disk instead. Where or how can I download the software available for that, please reply... thaks. (",)

    Bluetooth file transfer has never been supported with iOS devices.

  • Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

    I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
    http://www.apple.com/contact/
    B-rock

Maybe you are looking for

  • Removal of Compound attributes of an info object in the BEx display

    Hi, i have a Info object Parentid which is compounded with the Parent Source and a Date. I have to remove the compounded attributes when I am displaying the info object Parentid in the BEx report. What is the best way of doing this? Any help is deepl

  • Language problem in App Store.

    Hi,I'm come from Malaysia. My problem is how to change the language in App Store. In the previously, the App Store was using English to guide us download application.But it change to Malay recently. Anyone can help me solve the problem?

  • IdocReceiver not processing all the idocs produced from PFAL in OrgModeler

    Dear experts, We are on below Nakisa version. Name Nakisa OrgModeler Version 4.0 SP1 Build 0910021700 I ran the initial load for the OrgModeler and it produced around 500 idocs. When I followed the command line interface, it processed around 56 idocs

  • Issue with pivot

    Hi, I have a requirement where I need to convert rows to columns. Please find below query which I am using. SELECT h.*FROM table1 pivot ( SUM(qty) FOR startdate IN (func_get_date(), func_get_date()-7, func_get_date()-14) ) h; func_get_date() retunrs

  • Information on Transport Management System

    Hi Everyone Can anyone tell me a single table , which contains all the information about STMS  Configuration like , Transport domain profile, Transport group , Transport Layers, Transport Routes , dba host name  and tpparameters. Thanks in Advance Ra