How can i exend my Sneak Preview SAP NetWeaver 04s installation ?
Hi,
My license is valid up to: 26.04.2006. I would like to extend it for a couple of months.
How can i get a new License Key ? I have been told by [email protected] to ask my question via this forum.
Thank in advance !
A+
Michel R. Osborne, [email protected]
Certifié SAP Basis - Spécialiste SAP NetWeaver
Directeur Associé - DMR Conseil/Fujitsu
Hi Michel,
Nice to hear the problem is solved. Also you may close the
message so as to indicate its solved.
Please do reward points for replies that help
Regards
Srikishan
Similar Messages
-
ABAP Sneak Preview SAP NetWeaver 04s: Window Splitter
SAPgui Patch15:
Anybody found how to activate the Window Splitter in order to work with different parts of the program simultaneously?
It is reported on the documentation and in the "The New ABAP Editor" presentation here in sdn.sap.com.I found it.
SE38 - Utilities - Splitscreen editor - Utilities - Settings - Vertical -
Problems in the installation the sneak preview sap NetWeaver 04s-full ABAP
hello to all!!!!!!!
I have problems in phase 24 of the installation.The message of log is the following one:
ERROR 2006-03-25 17:33:28
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
ERROR 2006-03-25 17:33:29
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2006-03-25 17:33:29
FCO-00011 The step createIGSDestination with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|13|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|createIGSDestination was executed with status ERROR .
Somebody can help me to solve this problem. Asi I can of a good time learn abap!!!!!
thanks!!!!!!Hi,
Is the error in the phase "Change default passwords"?
Have you tried restarting the SAPInst? If the restart
doesn't help, please try to get a newer version of SAPInst
and continue. Note 929929 might help.
Regards
Srikishan -
ABAP Sneak Preview SAP NetWeaver 04s: where is the new Editor?
It's so nice to have NetWeawer 2004s up and running...
Anybody knows where is the new ABAP Editor?
As I know, it should be included but I cannot see it...
I'm using the SAPgui 640 Final Release - Patch 8.i am not sure whether it was there in patch 8, but i upgraded to patch14 and activated the new editor from
se38->utilities->settings->ABAP editor
here choose radiobutton front-end Editor (New)
warning:- dont apply gui patch 15 it has got some problem. when i applied patch 15 i couldnt event start the sap logon pad.
Regards
Raja
Message was edited by: Durairaj Athavan Raja -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
Sneak Preview SAP Netweaver 2004S SR1
Hi All,
I installed Sneak Preview SAP Netweaver 2004S SR1.
After that I found in sap management console, the second instance has yellow light. In process "jcontrol.EXE", it has status "stopped".
The developer Trace is as follows :
trc file: "F:\usr\sap\RAJ\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 4280
system name : RAJ
system nr. : 01
started at : Mon Apr 09 13:56:39 2007
arguments :
arg[00] : F:\usr\sap\RAJ\JC01\exe\jcontrol.EXE
arg[01] : pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
[Thr 5800] Mon Apr 09 13:56:40 2007
[Thr 5800] *** WARNING => INFO: Unknown property [instance.box.number=RAJJC01sumt-hyd] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.host=sumt-hyd] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties;F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties]
-> ms host : sumt-hyd
-> ms port : 3900
-> OS libs : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : sumt-hyd
-> ms port : 3900
-> os libs : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID12336400 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID12336450 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID12336400 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] ID12336450 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] sdm : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
[Thr 5800] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 5800] [Node: bootstrap] java home is set by profile parameter
Java Home: F:\rajendra\Program Files\javasdk
[Thr 5800] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\RAJ\JC01\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : F:\rajendra\Program Files\javasdk
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : 1.4.2_09-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\RAJ\JC01\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\RAJ\JC01\exe\jstartup.jar;F:\usr\sap\RAJ\JC01\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0123364
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> arg[02] = -DSAPINFO=RAJ_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4280
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=F:\usr\sap\RAJ\JC01\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\RAJ\JC01\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\RAJ\JC01\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> lib path = PATH=F:\rajendra\Program Files\javasdk\jre\bin\server;F:\rajendra\Program Files\javasdk\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
-> exe path = PATH=F:\rajendra\Program Files\javasdk\bin;F:\usr\sap\RAJ\JC01\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
[Thr 5800] Mon Apr 09 13:56:58 2007
[Thr 5800] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c 1642]
[Thr 5800] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 5800] JControlCloseProgram: started (exitcode = 66)
[Thr 5800] JControlCloseProgram: good bye... (exitcode = 66)I have same problem ,does anybody know the solution ,any idea
-
ABAP or JAVA edition of the sneak preview sap netweaver ??
Hi we want to install a local enviroment to test sap netweaver, in particular, sap portals.
We have seen that there are two edition and I have some questions:
1.-What's the diference between the ABAP and JAVA edition of the sneak preview sap netweaver? The abap does not include the portals, true?
2.-is possible to install both, ABAP and JAVA edition of the sneak preview sap netweaver?
3.-Are there installation guides and how-to of the sneak preview sap netweaver?
Thanks in advance.
Best Regards1) The ABAP side is more of the SAP basis platform which R/3 runs on top of. You have ABAP programs, Data Dictionary, Function modules, etc. Portals does NOT run on this side. If you are just looking for portals, then just install the java stack.
2) Yes it is possible.
3) There are a few weblogs on the subject.
/people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
/people/sugree.phatanapherom/blog/2005/08/01/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-java-edition
/people/gregor.wolf3/blog/2005/09/24/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-java-slim-edition
Please award points for helpful answers. Thanks.
Regards,
Rich Heilman -
Trouble with installation Sneak Preview SAP NetWeaver 2004s
Hello,
the installation of the Sneak Preview SAP NetWeaver 2004s fails at step 3 with the following error:
ERROR 2006-02-27 16:24:27
FSL-01001 Unable to check existence of account nadine\SAPServiceNSP. Der Arbeitsstationsdienst wurde nicht gestartet.
ERROR 2006-02-27 16:24:27
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-02-27 16:24:27
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I've checked following points:
- OS: Windows XP Professional
- Loopback adapter is installed and working
- hosts file contains correct IP-address
- the groups SAP_NSP_LocalAdmin and SAP_NSP_GlobalAdmin were created in step 3
- I can create the accounts nspadm and SAPServiceNSP by hand (with the same user!) and the installation continues but I ran into further errors in step 4.
Who can help?
Regards StefanHi , thanks for your hints .
I am thru .
What I did : create manually the user nspadm and NSPServiceAdm under Windows user.
pb was, as it is a company computer, we also have policies about what to put in passwords (capital letter, special caracters etc ...)
Now I'll see until which step I can go.
Cheers -
Sneak Preview SAP NetWeaver 2004s SAP Web Application Server 7.00 on MaxD
Dear all
I tried to install
"Sneak Preview SAP NetWeaver 2004s
SAP Web Application Server 7.00 on MaxDB (ABAP Edition) "
<b>on Windows Server 2003 Korean Edition.</b>
but i got the error.
~
INFO 2005-12-18 20:33:12
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0 Step CheckExistingServerSoftware returns TRUE.
ERROR 2005-12-18 20:33:14
MDB-07004 File not found: undefined.
ERROR 2005-12-18 20:33:14
The dbmcli call for action SDB_DBMVERSION failed. Check the logfile XCMDOUT.LOG.
ERROR 2005-12-18 20:33:14
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2005-12-18 20:33:14
FCO-00011 The step CheckExistingServerSoftware with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|CheckExistingServerSoftware was executed with status ERROR .
~
could you let me know how to do?
with kind regards
DavidDear all
i tried to install "Sneak Preview SAP NetWeaver 2004s SAP Web Application Server 7.00 on MaxDB" on <b>Windows XP SP2 , korean edition.</b>
at the beginning it was okay.
however on the "importing ABAP" stage, it shows the error.
I linked the screenshot and attached "test_MIGKEY.log".
According to "Sneak Preview SAP NetWeaver 2004s System Requirements",
Operating System:
Windows XP Professional (Service Pack 1) or Windows Server 2003
is this because of " XP SP 2"?
( I could manage it on Windows Server 2003 korean standard edition)
Do i need to activate (or run ) MaxDB manually ?
Thanks in advance.
With kind regards
David
[Screenshot]
http://static.flickr.com/9/75374137_5b70c5bfc6_o.png
test_MIGKEY.log----
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20051220103506
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(TFH) ERROR: Unable to open
desktop-win2k\j$\SAPNW2004sSneakPreviewABAP\NSPExport\ABAP\DATA\SAPAPPL0.TOC
(TFH) ERROR: OS error message: Invalid argument
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20051220103506
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20051220103630
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(TFH) ERROR: Unable to open
desktop-win2k\j$\SAPNW2004sSneakPreviewABAP\NSPExport\ABAP\DATA\SAPAPPL0.TOC
(TFH) ERROR: OS error message: Invalid argument
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20051220103630
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20051220104846
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20051220104846 -
Webdynpro doesn't start after installation of Sneak Preview SAP NetWeaver
Hi,
I have just installed the Sneak Preview SAP NetWeaver 2004. In the sap console I see that all the processes have successfully started.
However when I try to open the WebDynpro content administrator via browser at http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
An error has occurred:
"Failed to process the request."
Error stacktrace:
java.util.MissingResourceException: Can't find bundle for base name com.sap.tc.webdynpro.clientimpl.resourcesTranslated.MessageBundle, locale is
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:839)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:729)
Can anyone help me track down this problem.
VardiHello Stefan,
I'm sorry but I get an internal error:
PluginName: Web Dynpro Model Editor Services
Plugin ID: com.sap.ide.webdynpro.service.modeleditor
Class: com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog
Method: nextPressed
Message: Internal error - see detail information in exception trace.
Exception: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
It seem's I have a fundamental error in my installation.
Do you know a solution for the problem.
Again, thank you for your help.
Best regards
Manfred -
I downloaded <i>Sneak Preview SAP NetWeaver </i>from
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
The system requirements in that page says windows xp prof sp1 is supported.
But the downloaded package help, windows xp prof sp1 is not listed in the supported OS list.
I tried to install in windows xp prof sp2, the installation aborted, the main error was getdomaincontroll returned null.
Please let me know if any one has installed <i>Sneak Preview SAP NetWeaver</i> in windows xp prof sp2.
ThanksHi Manesh
Make sure that u are selecting local installation.and yes u need to install loobback adapter because it needs a static ip and through router u cannot assigned static ip. so just install microsoft loopback adapter, enter the host name and ip in ur windows\system32\drivers\ets\hosts file,when u finished ur installations then u can connect through router too.
Hope it helps
Regards
Subhash -
Sneak Preview SAP NetWeaver 2004s istalation problem
Hy there,
I have an error on installing Sneak Preview SAP NetWeaver 2004s (ABAP)
The last lines in XCMDOUT.LOG are
ERROR 2006-04-19 08:46:28
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-04-19 08:46:28
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-04-19 08:46:28
FCO-00011 The step sdb_init_instance_type with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .
Please hel me, I'm new in SAP
calin adrian comes
email: [email protected]Hi calin
There seems to be some problem with sp 16 max DB (version 7.6).
Please see this thread of the SDN forum
SP16 Preview: MaxDB Installation fails (Phase 6)
U will have to replace it with MAX DB ver7.5 .
If you find that ur problem is solved ,do not forget to reward points .
regards
rajeshkr -
Sneak Preview SAP NetWeaver ABAP Edition
I am trying to install Sneak Preview SAP NetWeaver ABAP Edition. Central Instance Installed sucessfully. But DB instance installation is giving error.
attaching log file as well......Please if u have any idea.
Regards
Tarun
INFO 2006-09-10 00:06:07
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-09-10 00:06:07
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-09-10 00:06:10
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'INFOTECH3\itp2' on host '.'.
INFO 2006-09-10 00:06:11
File not found: [C:/DOCUME1/itp2/LOCALS1/Temp/sapinst_exe.3644.1157859935/msvcp71.dll].
INFO 2006-09-10 00:06:11
File not found: [C:/DOCUME1/itp2/LOCALS1/Temp/sapinst_exe.3644.1157859935/msvcr71.dll].
INFO 2006-09-10 00:06:11
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.1.html.
INFO 2006-09-10 00:06:11
Copying file C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_ABAP_ADA_NUC/DB/summary.1.html.
INFO 2006-09-10 00:06:11
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\summary.1.html.
PHASE 2006-09-10 00:06:11
Prepare the installation program.
INFO 2006-09-10 00:06:31
Host operation t_HostInfo_SHARED processed successfully.
INFO 2006-09-10 00:06:45
The 'saploc' share exists in directory 'C:/usr/sap'. Choosing drive C: as the SAP system drive.
INFO[E] 2006-09-10 00:07:08
Account group="infotech3\SAP_LDAP" does not exist.
INFO[E] 2006-09-10 00:07:12
Account group="ORA_NSP_DBA" does not exist.
INFO[E] 2006-09-10 00:07:17
Account group="ORA_NSP_OPER" does not exist.
INFO[E] 2006-09-10 00:07:26
Account group="infotech3\dbnspctl" does not exist.
INFO 2006-09-10 00:10:29
Removing file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\NSP_sapdb_db_parameter.txt.
INFO 2006-09-10 00:10:29
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ADA_NUC\DB\NSP_sapdb_db_parameter.txt.
ERROR 2006-09-10 00:10:35
FSL-02015 Node C:/Documents/DATA does not exist.
ERROR 2006-09-10 00:10:35
MSC-01003 ESyException: ESAPinstException: error text undefined
WARNING 2006-09-10 00:10:35
The step fillR3loadPackageTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable was executed with status ERROR.Welcome to SDN
Check out the following thread.
SAP NetWeaver Sneak Preview: Database Instance Installation
Please search the forum before posting.
If your question is answered, reward the helpful answers and mark the thread as answered.
Regards
Raja -
Sneak Preview SAP NetWeaver 2004s Full Java Edition Download
Hi All,
i try to download the Sneak Preview with DAP.
After terminating file 1 download, the file size is only ca. 380 MB instead of 1.9 GB. I can't download the full file. did any body now the problem?Hi Bris,
I have installed DAP and tried downloading sneak preview 2004s Java edition. But it is still downloading in normal window , its not using DAP to download. I tried taking the url manually and try downloading it , but still it doesn't work. Could someone guide me on how to use DAP to download sneak preview coz it does not download properly by normal means.
Thanks and regards,
Nirmal G -
Sneak Preview SAP NetWeaver 2004 - Error while re-installing (Step-4)
Hi,
Funny things happenning,
Again got a problem while installing Sneak Preview, this time in Step-4 at Database instance creation. Here is the error log. Could someone help me in resolving the problem?
ERROR 2005-12-25 12:58:29
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2005-12-25 12:58:29
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2005-12-25 12:58:29
FCO-00011 The step sdb_init_instance_type with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .
Your help would be highly aprreciated.
Thanks and Regards,
Jagadish.Hi,
I stopped the fllowing NSP services (SAPDB: .M760018, SAPDB: .M760018 (omststknl.exe), SAPDB: .M760018 (quick), SAPDB: .M760018 (slow), SAPDB: NSP, SAPDB: NSP (omststknl.exe), SAPDB: NSP (quick), SAPDB: NSP (slow), SAPNSP_00, SAPOsCol), all these services are from D:\usr directory, left the XServer (Automatic). I also removed the nspadm and SAPServiceNSP users from all the locations before re-installing, also removed C:\Program Files\sapinst_instdir folder, removed registries (Registry Editor -> HKEY_LOCAL_MACHINE -> SOFTWARE -> SAP) like NSP, SAP DBtech, also from Registry Editor -> HKEY_CURRENT_USER -> Software -> SAP) like SAP DBtech. Also the folders like sapdb, usr etc from the D:\, but no luck. <b>Should there be any other registries or anything else to be removed before re-installing?</b>
Also here are some more details from XCMDOUT file.
> Subprocess starts at 20051225145350
Execute Command : d:\sapdb\programs\pgm\dbmcli.exe -s dbm_version
Execute Session Command : exit
> Subprocess stops at 20051225145350
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 018-123-113-357
OS = WIN32
INSTROOT = d:\sapdb\nsp\db
LOGON = True
CODE = ASCII
SWAP = full
UNICODE = (unknown)
INSTANCE = (unknown)
SYSNAME = Windows XP
> Subprocess starts at 20051225145350
Execute Command : d:\sapdb\programs\pgm\dbmcli.exe -n jagadish db_enum
Execute Session Command : exit
> Subprocess stops at 20051225145350
OK
NSP d:\sapdb\nsp\db 7.6.00.18 slow offline
NSP d:\sapdb\nsp\db 7.6.00.18 fast offline
<b>----
> Subprocess starts at 20051225145351
Execute Command : d:\sapdb\programs\pgm\dbmcli.exe -n jagadish -d NSP -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : exit
> Subprocess stops at 20051225145351
Error! Connection failed to node jagadish for database NSP: ERR_USRFAIL: User authorization failed</b>
Also Could someone share uninstall guide, if they have.
Looking forward for your response to resolve this issue.
Thanks and Regards,
Jagadish.
Maybe you are looking for
-
ORA-06550/PLS-00201 error while configuring data source
Hi, My development platform is Visual Studio 2005, ODAC11g Release 1 (11.1.0.6.20), and Oracle 10g Release 2 database. I tried to setup a sqlDatasource in my web page using drag and drop features When I configure the sqlDatasource to use a stored pro
-
AnyConnect VPN on Mac - Can't SSH to Virtualbox Virtual Machines
Hi, I'm running AnyConnect version 3.1.05170 on my Mac. I'm also doing SW Development on multiple Virtual Machines on my Mac via VirtualBox. When I connect via VPN, I can no longer SSH to my Virtual Machines. I'm sure there is a rules setting or s
-
Capture audio from soundcard - help!
Hi everyone, I'm tyring to write a little utility that captures everything coming out of my sound card and stores it as a .wav file on the system. (When I say everything, I mean wave output...for now). The purpose of this little exercise is two fold,
-
Airport Express with HP PSC 1410 printer
I have an airport/airtunes express and have an HP PSC 1410 all in one printer. I can't get it to work as my "network printer" I was surfing the Apple website looking at FAQs and it directed me to the HP site. There are a list of known printers that w
-
Not able drop oracle user account - please suggest
Hi, I am not able drop a user from oracle SQL> DROP USER orderpd CASCADE; DROP USER orderpd CASCADE ERROR at line 1: ORA-00604: error occurred at recursive SQL level 2 ORA-00376: file 2 cannot be read at this time ORA-01110: data file 2: '/oradata/ds