How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
Thanks in advance for nay help you can offer.
-Sam

Hi Richard and Kevin.
First of all thanks so much for the response and info. Just to clarify, you're saying I will need  8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
Much thanks,
Sam

Similar Messages

  • How can I export multiple language tracks?

    I have a MOV video with two language tracks, English and German. I want to export the file to another format (m4v) or import to iTunes.
    Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
    The video is H.264, 688 x 416, Millions
    BOTH audio tracks are AAC, Stereo (L, R) 48.000 kHz
    In the properties window, I selected (enabled) both audio tracks before exporting. And, in the "other settings" tab of properties, I set the language for each track, and I listed the "alternate" as the other language track.
    Also when I imported the MOV into iMovie it only had the English track.
    Many thanks,
    MyMacForMore

    Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
    Have not personally tried this, but you might try the Free HandBrake app. I have loaded a file with one active and one inactive audio track and found that HandBrake does see and allow you to select one, the other, or both tracks for processing. Did not actually bother to convert the tracks since they were already AAC and could be added individually to an MOV file using QT 7 "Pro" software.
    Also when I imported the MOV into iMovie it only had the English track.
    I believe iMovie "Finder" level import only allows one audio and/or one video track per file. You can, of course, extract the non-included track as an audio file, and add it to an iMovie project separately. However, be advised, that the audio tracks will be flattened/dowmixed to a single track during export which may not be what you want.

  • How can I export a list of events for one of many calendars - e.g. "sailing" to use in Excel

    How can I export a list of events for one of many calendars - e.g. "sailing" to use in Excel?

    See this thread here
    Display number of emails by sender

  • How can I export an audio track

    I have made an audio track with three songs in GB and now I want to export it and use it as a track for a Keynote slideshow.
    How can I export it as AAC or similar?

    I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
    Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience. 

  • How do i export 16 mono tracks in a sequence as 8 stereo tracks.

    Hi I'll be working with 16 tracks of mono audio in Premiere to enable flexibility with my audio edits but when i export i want to make those 16 tracks as 8 stereo tracks, as this is what our specs for TX are.  So 1&2 will be stereo track 1, 3&4 will be stereo track 2, 5&6 will be stereo track 3 and so forth... In FCP this is easy as you can link and unlink the audio in the sequence, and in the sequence settings audio outputs dictate whether it will be mono or stereo.
    From what i gather i can edit in mono sequence then copy and paste into stereo sequence, however as the audio tracks are 1 track whether it is stereo or mono how do 16 fit into 8 when pasting.
    Sorry in advance if i am missing something very easy here, but im pulling my hair out with this.
    Thanks in advance
    Jason

    PP wil naturally send a track to two channels, even with a multichannel Master.  So you can ruote the tracks in the Mixer window.

  • How can I export a PDF form and the filled in fields to a text document?

    OK, so I have a situation.  I need people to be able to open a reader-enabled PDF form, fill out the form fields, and then export the filled-out PDF form to a basic text document.  This seems easy since Adobe Reader can save to text.  The problem is, the answers in the form fields do not show in the text file!  Each radio button shows as yes and no, and there is no indication in the text file which one was selected.  In addition, the form fields are not exported next to the questions on the form.  I tried flattening the form in Adobe pro, and that did not work either.
    How can I create a fillable form for Adobe Reader, and then let the user export their answers AND the questions on the form to plain text?

    OK, so I tried this as a starting point, and assigned it to a button on page 3 of the form.
    p=0;
    console.show();
    console.clear();
    for (var j = 0; j < this.getPageNumWords(p);j++) {
          var word = this.getPageNthWord(p,j,false);
          console.println(word);
    This gives me all the words on the first page not in fields, and each word goes on a separate line.  Now, characters in the document such as "&" or ")" cause the rest of the word to go on the next line down.
    Next, I tried this:
    console.show();
    console.clear();
    for (var j = 0; j < this.getPageNthWord(j);j++)
          var word = this.getPageNthWord(j,false);
          console.println(word);
    This only gives me the first word on page 3, the page the button is placed?
    What I need to do is run the code and place words on one line until the code hits a keyword "var cKeyWord1 = “Key1” for example?, then insert the value of field one, Start a new line in the console, restart the code where it left off until it hits the next key word "var cKeyWord2 = “Key2”, insert the value of field two, add a new line, and on and on.
    Is this possible?

  • How can I export an audio track with just the effect signal without the audio?

    I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
    I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

    I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
    Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience. 

  • How can I export a single track in Soundbooth CS5?

    Greetings,
    I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
    How can I do this in CS5 Soundbooth?
    Thanks,
    folsombob

    Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
    If you have all the tracks right where you want them, are you able to save the file as an mp3?
    Are you looking to export it for web use?
    For video tracking?
    I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

  • How can I export my Firefox bookmarks (and the hierarchical structure of folders) to the Scrapbook Add-On?

    I'm trying to replicate the hierarchical structure of my Firefox bookmarks in Scrapbook and save the webpages automatically. Is that possible in an automatic (or easy) way?
    Many thanks

    I'm not sure how Scrapbook works, but if you open a web page, can it automatically capture all the linked pages? If so, try this:
    (1) Export your bookmarks to an HTML file, and save it in a convenient locaiton (e.g., desktop). This article has the steps: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]].
    (2) Open the file you just created in Firefox. You could double-click the file, or use Open from the menu, or drag and drop it on an open tab.
    Will Scrapbook work with that?

  • How can I export my Active logins and my extensions list to my new laptop (( I'm using Firefox 3.6.4 and Win. 7 on both ))

    I just want to export my big "login" list as because of depending on firefox to remember it and automaticly retype it I 've forgetten many of them! so if I can move this list to my laptop it would be easier and greater than login to every site and fourm I've joined and re-join again and lose my member or I've to ask a new password from each site then go to my email and login then change the password to the old one, it would be very nasty to do this to all of my logins!.
    and also can I move my installed extensions with there currently option to firefox in my laptop having the same version of firefox "3.6.4" or I've to install them again in the laptop?.
    Note: both my computer and the new laptop running on Windows 7 professional OEM and having the same firefox version

    See http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords
    Password Exporter: https://addons.mozilla.org/firefox/addon/2848
    http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    http://kb.mozillazine.org/Moving_your_profile_folder
    http://kb.mozillazine.org/Profile_backup

  • How can I export a movie with audio that I have edited in logic 9 to a quicktime movie

    I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!

    Hi
    One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
    You must actively de-select those tracks that you do NOT want to include in the Export.
    CCT

  • How can I export a project (a book) from one iPhoto library to another?

    I have a photo book in an iPhoto library that was on a laptop.  I'd like to export it from that library and import it into my iPhoto library on my iMac.  Is there any way to do that?  Thanks!

    No
    Books do not exist. They are just database entries. So you must move the entire database (the iPhoto library by default) to move a book. You can make a smaller database by duplicating the current one and deleting everything except the book and it's photos. You can make and save a PDF of a book
    LN

  • How can i export my custom abap code from one SAP system to another

    is there a way to export my custom code to any other SAP system.
    not the same client or server. say for ex: i develop a code in my system remotely and want to provide the same for my client to export into their system.
    maybe same versions but diff systems.
    is there a way to save as binary file or something?
    pls advice.
    thanks

    Hello,
    Yes u can do it.
    In SE38 give ur report name and click display.
    Now u will see ur code.
    In the MENU follow the path:
    Utilities-->More Utilities --> Upload/Download --> Download.
    Now ur report can downloaded to any format of file.
    Ask ur client to upload ur report in the similar fashion..
    Cheers,
    Vasanth

  • How can I export the whole schema but except one table?

    I need export one schema from one hp-ux server using exp command, this schema will be exported into some dmp files, then I ftp these files into another hp-ux server, import this schema from these dmp file in that server.
    Problem is: there is one very big table which is about 20G size in this schema, so I don't want this table to be exported. I know there is a parameter called TABLES in exp command, but this parameter just apply to table-mode Export. So does there have other ways for me to achieve my goal?

    Hi,
    to exclude the table (or some of them) you can create control file using SQL*Plus with spool. All what you need is to create sql statement and save results in control file. As an example:
    oratest> select owner||'.'||table_name||','
    2 from all_tables where owner = user;
    OWNER||'.'||TABLE_NAME||','
    GORYA1.A1,
    GORYA1.CLEAN_D,
    GORYA1.D1,
    GORYA1.DICT_D,
    GORYA1.H1,
    GORYA1.MY_USERS,
    GORYA1.P1,
    GORYA1.P2000,
    GORYA1.PP1,
    GORYA1.PP2,
    GORYA1.REP_1,
    GORYA1.TREATMENT,
    GORYA1.TREATMENT1,
    Copy-paste it into control file under "tables=" clause and remove the last comma. You can add to the sql any "where" what you would like to restrict output.
    Andrey

  • How can I mix calendars from Exchange and the one on iCloud

    I have different calendars on my iPad as a result of having my Outlook Exchange email from the company I woked for synchronized in it. Now, I don't work there anymore but when I turned on iCloud, the only calendar on iCloud is another one but the one I had on Exchange. Help!!!!!!!!!!!

    So what exactly is the problem?

Maybe you are looking for