How can I export m2ts footage with 5.1 audio in PP CS5.5?

Dear All!
I have a 90 minutes project which made from 4 sequence. Sequence settings are the followings : AVCHD 1080p 25fps square pixels , 5.1 channel master audio.
I made the sequences from avchd file-s, which recorded with Sony HDR-CX700V with AVCHD 1080p 25fps and Dolby digital 5.1 sound.
Right now I finished the project with lots of effects and imported After effects compositions, and I cannot find any setting to create 5.1 sound.
I have Mainconcept codec suite, but this offer m2ts 1440*1080i settings only.( And I cannot configure the mainconcept codec settings.)
Do you have any idea how can I export the project without any degradation, and with 5.1 audio? The original footages recorded with this properties : H264/AVC - top field first - 22.000 Mbit/sec.
And I use in the project some 720p H264/AVC - progressive - 8.001 Mbit/sec videos.
Please help! Thanks a lot.

You have to consider a couple of things. Mixing 1080 and 720 material is best done in a 720 sequence, because uprezzing will seriously deteriorate quality, unless you accept black borders. That also means exporting a 720 format as maximum, unless again you accept serious quality loss. Whatever the resolution you choose, exporting AVCHD material to anything else than uncompressed, Lagarith or UT will entail a generation loss and thus quality loss. The best export settings are dependent on your delivery medium. DVD, BD or web.
Since you are working in a 1080 sequence, the quality loss of uprezzed 720 material is not a big issue, apparently, so what is the relevancy of 'the same quality' on export when you have already compromised quality?

Similar Messages

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

How Can I Export A Table With Its Entries ( values )

Hi guys,
How can i export a table with the entries that the table is populated with ??!!
Best Regards,
Fateh

To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How can I export a Video while keeping separate Audio Channels?

I'm trying to export some AVCHD footage and convert to ProRes. However, I do not want to mix the left and right channels together so that they both end up playing the same audio in the ProRes file. I have audio from one mic on Channel 1 and audio from another mic on Channel 2, and I would like to keep that once the video files is exported. I'm new to Premiere Pro so instead of spending an hour trying to figure it out myself I was hoping someone could help me out.
Thanks,
Mike

Right on. Now, the technical explanation, so you know what's going on:
Your footage imported with dual mono tracks--whether it was recorded that way or mapped that way on import, only you can say. When you dropped it into a sequence (or on the New Item button), the source audio tracks were placed in mono sequence tracks, but the sequence has a stereo master track. When the audio from these tracks is routed from the sequence tracks to the master tracks, since it's mono and by default panned center, it outputs to both output channels equally. By panning the mono tracks hard left and hard right, respectively, you're essentially isolating each of those tracks to a particular output channel.
Had your audio been shot as stereo or if you had remapped the dual mono tracks (right-click the clip in the bin before using it in a sequence and go to Modify > Audio Channels) to function as the two channels of a stereo clip, you could have dropped the clip into a stereo sequence track, and the separation would have maintained (assuming the sequence was using a stereo master track). This is a viable solution, too, but may limit your editing a bit more since instead of two separate mono audio tracks, you're working with one stereo audio track.
Either way will work; experiment to decide which will work best for your workflow.

How can I export a Quicktime with Alpha embedded?

I have a few titles that I've created in Premiere. I've placed these titles into their own sequence and would like to export them as a Quicktime movie using the Animation codec with an embedded alpha channel (Millions+) so that I can import it into After Effects and do some animation work with them. I don't want them against black though.
When I Export Media in Premiere and select Quicktime with the Animation codec, the "code settings" button is greyed out.
Please help. There must be a way to export media with an embedded alpha channel like you can in FCP.
Thanks.

WoOWavE_Sync_Pro,
I don't see what is complicated about it at all. I don't mean to start an argument, but making a title is easy, exporting it with an Alpha channel is easy (as shown above). Where is the problem? Why go to TIFF? I certainly would never "export normally and key out the backgrounf (sic) in AE"
Perhaps you would care to explain your comments in more detail?
If you are interested in the font style I used, it came from Tim Kolb back in the CS3 days or before. I have a link to his styles on my web site. I used to count the downloads, but over the years I lost track.
Of course, having said that, if I was going to have a complicated title with motion, I would use AE to begin with. And I would probably use a downloaded template as a starting point. But that is because other people are more creative than I am. I am just a techie dabbling on the creative side of things.
By the way, I suppose I should get around to testing your product. If I like it, I will post a link on my web site to direct people to it. Feel free to send me an email from my web site telling me why people should use it and what you want people to know about it. And you might want to suggest how to test it as well. I used to get a LOT of visitors every day. It has cut way back since I have not been updating it. Now that I have started to update it again, I expect the visitor count will rise again. The moderator is only doing his/her job. This is a site sponsored by a corporation, and advertising for other companies is probably not good form (besides being against the rules).
http://www.stevengotz.com

How can I export an mpeg2 with 4:2:2 chroma?

I've done a lot of searching on this and learned a little bit but can't figure out what I'm missing. I need to supply a company with a movie to very specific mpeg2 specs. I've got all of the settings right except the file is rendering out with 4:2:0 sampling and it needs to be 4:2:2. There isn't any sort of option for this in my Export Settings (using CS4). Am I missing something obvious? Or does this depend on the source material and it's something I can't change?

How can I Export a PDF with Hebrew Font

I am having trouble exporting a PDF file with a Hebrew font into word document.

Sorry for the long delay in getting back to you! I must have missed your original post.
Unfortunately our ExportPDF service doesn't support Hebrew text. You can vote for this feature in here: http://forums.adobe.com/ideas/1554 We use the Ideas section to help prioritize features.
-David

How can I import .mov footage with original pixel aspect ratio?

So the footage is 720x480 Square Pixels (1.0), 29.97 fps, progressive .mov but when I import it into Premiere Pro, they come up compressed as D1/DV NTSC (0.9091) automatically. When I try to Interpret Footage, it simply adds black bars. Why can't it just import correctly? When I preview the original footage, it plays back correctly but the preview inside Premiere Pro shows the distorted version... Please and thank you!!!

The suggestion about "new item" above was short. Here's the "full" version. In the Project Panel, go to the lower right corner ... click on the "New Item" Icon ... as shown here:
The first item on the pop-up menu that will appear should be "Sequence" ... click on it and just say ok at the next screen without even reading it. It's irrelevant, really.
Then going back to your project panel (we assume you've already imported your footage into it) click & drag a clip from the proj. panel to the timeline, or move one from the "Source monitor" to the timeline ... you should get a pop-up asking if you want the timeline changed to your footage, or your footage changed to the timeline. Take the timeline/sequence settings changed to match footage, and go.
That SHOULD take care of the problem in the vast majority of cases. It is such a simple fix, and so often the easiest and "correctist", that it's worth a try. Navigating the choices of setting up sequences is best left for those people who say, study GPU algorithms for a couple hours before going to bed for the sheer exhilaration of it ... unless, of course, PrPro actuall does a face-plant with your footage. But it mostly works good at it ... once you just let it ... so you might give that a try, takes what ... 20 seconds to see if it works?
neil

How can I merge chromokey footage with another project?

I have a project that I'm working on and want to go back in and place some green screen footage into the original project. What do I have to do to be able to use and edit the green screen footage and place it into the original footage?

In FCPX? Just place the green screen footage over the storyline (as a connected clip) and apply the Keyer effect to the green screen footage (if the green screen is really good, you probably won't even have to make any adjustments to the keyer). You can also use the Transform parameters in the Video inspector to adjust size, positioning and orientation of the overlaid footage to fit into the storyline original.

How can I export a movie with audio that I have edited in logic 9 to a quicktime movie

I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!

Hi
One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
You must actively de-select those tracks that you do NOT want to include in the Export.
CCT

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

How can I export photos from my iPad or iPod to my main computer or hard drive. My old computer died and I want to get my photos onto my new computer. Thanks in advance.

HOw can I export photos from my iPad or iPod to my main computer? My old computer died with my photos on it but I want to move my photo library from my iPad or iPod to the computer I just bought. Thanks for any help you can give.

Sorry but your iPhoto library is not on an iPad or iPod - you may have photos there (most likely low resolution copies) but not an iPhoto library - dying computers (along with software and human errors) are why you always must have a backup - now is the time to load it
LN

How can I export m2ts footage with 5.1 audio in PP CS5.5?

Similar Messages

Maybe you are looking for