How can i extend a wireless network with time capsule

How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

How can i extend an existing wifi verizon wireless network with time capsule?
It all depends on what you mean by "extend".
If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

Similar Messages

How can I extend my wireless network with the Time Capsule?

I recently bought a Time Capsule and set it up, backed up all my data, etc. It is currently plugged in to my AT&T Uverse wireless router via a LAN CAT5e cable. I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it. And if possible, how so? Or does it ALWAYS have to be wired'connected to my router for the internet to work?
Thanks in advance.

I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it.
Sorry but no. Extending using only wireless would require that the Time Capsule connect to another Apple router that is producing the wireless network.
Another way of saying the same thing is that you must have two Apple routers to be able to extend the signal wirelessly.

Extend FiOS wireless network with Time Capsule

I have a FiOS wifi router and a 1TB TC (with latest firmware 7.6.3). I'd like to extend the wireless network to cover some dead zones. I've run ethernet from the LAN port on the router to the WAN port on the Time Capsule, and it's getting an IP and internet connectivity. However, when I follow the Apple instructions to extend a wireless network, I get the warning error "unable to extend network" and the flashing orange light. I've confirmed the SSID and password are correct and match the FiOS SSID and password, and I've confirmed that the TC is in bridge mode. I've also logged into the FiOS router and confirmed it's assigning IPs to the wired and wireless componets of the TC, and recognizes the wireless is in bridge mode. Any suggestions?
I've got it working currently as a separate SSID, but it's just a pain to have to jump from weak-network1 to TC-network2 whenever I'm in a dead zone. Thanks in advance!

Check to make sure that you have the TC configured to.....
Create a wireless network (not "extend".....as that is only used for wireless extension and you are using Ethernet)
Use the exact same wireless network name (SSID) as the FIOS router
Use the exact same type of wireless security that the FIOS router is using (Make sure that this is not WEP) It should be WPA2 Personal or WPA/WPA2 Personal.
Same wireless password as the FIOS
Bridge Mode configuration
Unless everything matches up correctly, you will have two separate networks that require two separate log ons.
Configured correctly, you will have a "roaming" network. Your Mac will automatically switch over to the wireless access point with the best signal quality as it moves from one area to another.

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

Can I extend my wireless network with my old Airport?

Can I extend my wireless network with my old Airport? I have the airport extreme 802.11n & my old Airport (translucent white) base station. Can I mix the two to expand my range?

No problem; ask as many questions as you need to.
How do I reconfigure the Snow as a bridge to allow the AEBSn to continue to provide both NAT & DHCP services for the entire network?
I don't have a Snow to verify this, but it should be similar to the later base stations when using the AirPort Admin Utility.
To set up the Snow base station as a bridge, either connect to the Snow's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the Snow, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network.

HT4259 How can I extend a wireless network from a 2Wire modem by usingan Airport Express? Years ago I could do this just by plugging in the (old) Airport Express. TIA Travelmonger

How can I extend a wirelss network from a 2Wire modem using an Airport Express? Some years ago using the old Express I was able to do so simply by plugging on the Express witha minimum of tweaking. Still the same?
TIA
Travelmonger

Still the same?
Unfortunately, no.
Apple's newer "Extend a wireless network" feature was designed to only work with other Apple products, so it would be extremely unlikely that it would work with a 2-Wire device if you plan to extend using wireless only.
If you plan to connect the AirPort Express to the 2-Wire device using a wired Ethernet connection, the Express can be configured to provide more wireless coverage that way.

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

How can i switch my att wifi with time capsule

how can i switch my att wifi with time capsule

Sorry I have no idea what you mean.. switch off, switch on, swap over.
Bridge the TC and use same ssid (wireless name), security but different channels..
Or just turn it off.
Please write a question that is a sentence and has sense.

How can I expand my wireless network with a Time Capsule and Airport Express?

My entire house is wired for ethernet access (2 floors). I have a Time Capsule on the 2nd floor that reaches the entire house except for one room.
In this one room I have an ethernet port plugged into an Airport Express.
The problem I encounter is that I have two separate wifi networks with two separate names. I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room. Also, there is really no place in-between that the AE can be placed to extend the reach. The building is concrete and steel, I think that has a lot to do with the problem.
My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network? I also have a SONOS system that further complicates things, I'm afraid. Would it help if I drew some sort of diagram?
Thanks!

Your network is not working as you describe.. or I have misunderstood the layout..
What is the broadband type? Modem is where? What is the main router?
From your screen shots the main router is the airport express that covers one room which seems wrong.
Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
You are having issues with setup .. half of which is caused by v6 airport utility.
What OS are you running? Please install 5.6 utility.. do it.. do it now!!
Easy for Lion.
http://support.apple.com/kb/DL1482
Messy but possible for ML.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Troubling extending wireless network with Time Capsule and Airport Extreme

I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
2TB Time Capsule (Dual-Band II)
1 Airport Extreme (Dual Band)
I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
Base station setup
So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
Extended station setup
The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
Results:
Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
Thanks to anyone with some insight here!

Hello Kennuff. Welcome to the Apple Discussions!
Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
Configure the TC & AEBSn as follows:
AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
o Wireless Mode = Create a wireless network
o Allow this network to be extended: <not checked>
o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
o Wireless Security: <configure both routers the same>
AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)

Extend wireless network with Time Capsule

I have a dual band Time Capsule in a two story house. The TC is upstairs, and I have an Airport Express downstairs to extend the wireless network. However, the speed is very slow downstairs. I have recently wired the downstairs with ethernet cable, and would like to use a wired wireless repeater (bridge) to get a better signal downstairs. What hardware should I use?

I have a similar but slightly different issue/question. I didn't know whether to start a new post but I will try here first. I'm not able to set up a 5GHz roaming network.
I am a self employed songwriter and need 5GHz speed for numerous devices that stream video and music (computers, DirecTv, Tivos, AppleTVs etc.). All these have both wireless cards and Ethernet cables connected for backup. I need the 2GHz radio only for iPhones or guests. I have ATT DSL with 5 static IP addresses. The first is assigned to TCdual and "shared". My older "L" shaped home is tuff on wireless signals (plaster walls etc). Since I've had a lot of trouble with WDS and wireless connections, years ago, I ran Ethernet to every network device as backup, including an Ethernet connected Airport Express, with wireless turned off, I dedicated exclusively to Remote Tunes. It's been working the past few months (knock on wood). But I need to extend TCdual's 5GHz network with roaming. Here's what I've tried without success.
I placed a 2nd Airport with 5GHz (the model before TC dual) in the room TC's 5GHz will not reach and connected it to TC via ethernet. Using Airport Utility, I tried to "extend" TC's 5GHz network. No luck. AU will only extend TC's default network, which is 2GHz. Very frustrating. So... the only way to get 5GHz in this room is to create a 2nd 5GHz network on Airport #2. Even using the same network name does not create roaming. Whenever I move MBP from this room, I lose Airport#2's 5GHz network and every WAN/LAN connection. I have to reconnect to TC's 5GHz network, every other WAN/LAN device, resume downloads, iChats etc. and start again. VERY frustrating. I think I must be missing something. Am I really forced to choose between speed or roaming. Can't I set up a 5GHz roaming network and have both?

How can you extend the signal range of time capsule

I have a time capsule in my office down stairs, and my apple tv upstairs, but the signal strength is very week (only one bar) so when I try to stream a movie is very slow. There is some thing I can do or buy to make the signal stronger??
Thank you.

You can add an AirPort Extreme to "extend a wireless network" to improve the wireless signal. Locate the AirPort Extreme approximately half way between the Time Capsule and the Apple TV.
Setup instructions are here:
Extended network

Creating wireless network with Time Capsule

hi, I just have couple of questions before installing the time capsule;
so far I have been using cable DSL modem, so my question is - is it possible to set time capsule as a wireless router, or does time capsule still have to be connected with DSL modem and then act wiresly with iMac?
I was thinking if i could replace cable DSL modem with time capsule
thank you

The Time Capsule has to be connected to your DSL modem. Otherwise you won't be able to connect to internet.

Wireless Network with Time Capsule -- 2 Questions (5 GHz? 2nd Network?)

Hi all:
First off, thanks to all of you for being there. Apple Discussion Boards are the best!
OK, to start with, here's my gear list:
-iMac 27" QC (bought Dec. '09), 2.8 GHz, 8 GB RAM, running 10.6.4
-Time Capsule 802.11n, 1 TB (bought April '10)
-Airport Express 802.11n (bought April '10)
-iPad
-iPhone 4
So I set up the Time Capsule a few months ago, and paired it with my iMac and with the Airport Express (to stream AirTunes), and everything has been working fine.
The iPad and iPhone are also working fine. (In Airport Utility > Advanced > Logs, the iPhone shows a rate of 72, signal -60, and noise -94. And the iMac shows a rate of 300, signal -47, and noise -96. Don't know if that is good or bad or normal.)
So, here are my questions:
First, in Airport Utility > AirPort > Wireless > Wireless Network Options... should I check the box that says "5 GHz Network Name"? It is currently not checked. Would that increase performance? (All my devices - iPad, iPhone, Airport Express - are "n" devices, right? Does that mean I should check that box? Is that even an issue?)
Second, when I first set up my wireless network I named it "MP Network." But I notice in System Preferences > Airport > Advanced that there is another network that apparently was set up when I first set up the TC. Its name is "Apple Network" plus 3 letters and 3 numbers.
What is that? It doesn't show up anywhere else. Should I delete it? Is it using up bandwidth by being there?
(Both networks appear in that same place on System Preferences, and both are WPA2 Personal.)
Thanks to anyone for any input/advice. And apologies if any of the above is confusing.
Matt

+So it sounds like I should leave the network as is, right?+
Yes, this makes sense for most users. Some users sometimes have trouble with a new computer that sometimes connects to the 5 GHz network and sometimes connects to the 2.4 GHz network. They want the computer to always connect to the 5 GHz network so they assign a separate name to that network and configure their computer to connect to that network first.
+The iPhone being "g" does not reduce my overall performance, right?+
No, because it's using the 2.4 GHz band. Faster devices use the 5 GHz band.
+And my TC broadcasts dual band so the "n" devices get what they want and the "g" device gets what it wants...correct?+
Yes, but you need to remember that "n" devices can connect at either 2.4 GHz or 5 GHz.
+(The 300 Mbits/sec I am getting on my iMac is good, right? And is 72 for the iPhone good, too?)+
300 Mbps is outstanding. Most users average 220-270 with a good connection. The iPhone is a "g" device, which means it can operate up to 54 Mbps, so I'm not sure what you are seeing here.
+As for the other issue of the "out of the box" network name, I think I will delete it. (I am of the school that enjoys things clean and avoids unnecessary clutter!) But will that create any problems for me? Is it as simple as clicking the "-" (remove) icon in System Preferences > Network > AirPort tab?+
That's all you have to do.
I can't remember if the password for the Apple Network xxxxxxx is stored in Keychain Access.
Macintosh HD > Applications > Utilities > KeyChain Access
Look for a listing of the Apple Network xxxxxx and delete that entry if you want to remove all evidence of that network.

How can i extend a wireless network with time capsule

Similar Messages

Maybe you are looking for