How can I extend to a second monitor

I have a Macbook Pro OSX 10.9.3(13D65) 17 inc early 2008 I have the ability to Mirror but can I upgrade to be able to add a monitor so I can work on an extended monitor instead of using mirror?Can I also open Garageband in both of those windows and work on 2 different projects at the same time.

If you can mirror to a display you should be able to extend to it with no upgrade necessary; just turn off mirroring.
I don't know the answer to the Garageband question. Can it open multiple projects on one screen?

Similar Messages

How can I set up a second monitor using the DVI, a mini Displayport to dvi?

Hey guys,
In my office I'm trying to set up a mac with two displays, Samsung screensync sa450s, using a Startech MDP2DVIW mini displayport to dvi, and the DVI port found on the ATI Radeon HD 5770.
However, whichever monitor is plugged in through the mini displayport never shows video, and instead will just flicker sometimes, no matter which monitor I use, or which of the mini displayports i use. The system profiler recognizes both monitors, and has all of the specs on both monitors, but only the monitor connected directly to the DVI displays anything, even if it is the secondary monitor.
The StarTech does still work with the macpro that used to be in this spot, and the only salient distinction I can find is that the old computer has Mountain Lion, while the new one is still running Snow Leopard. Is this a case where we should just update the OS? or is there another fix?
I've also read online that many people have been not fully plugging in these mini displayports, so I'm worried that I'm doing that, but then I'd figure it wouldn't have worked when I plugged it into the old computer unless my predecessor had made some hardware adjustments.
Let me know.

A frequent solution to problems like the one you describe involves pushing in the Mini DisplayPort cable-end.
It should be inserted until essentially ALL of the metal end disappears inside the jack on the 5770 board.
Is this display wider than 1920 wide?
EDIT: The Startech MDP2DVIW adapter you cited is a passive adapter suitable for 1920 wide or less. You should be using ACTIVE adapters, about US$35. They cost a little more, but are much more trouble-free. The ACTIVE designation means they contain booster circuitry to raise the Voltage levels up to true DVI levels. The default converter produces good timing, but the signals are really low.

How can I set up an external monitor to extend my screen in windows 7 bootcamp?

How can I set up an external monitor to extend my screen in windows 7 bootcamp? I have updated bootcamp to the latest version. The monitor I have works while I am using Mac OS X. While in bootcamp the monitor is dectected and I am able to select the settings and displays however the external monitor remains alseep. I hooked it up using a mini display port to VGA adapter. Any suggestions?
Thanks

On your Windows desktop right click and select Screen resolution from the menu. You should see a window like this:
Make sure you select Extend and then set your resolutions for each monitor.
If this does not work for you try asking on a Windows forum about extending displays to a second monitor.

How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
Thank you very much!
Regarding the Alarmed app, doesn't it have to be running to actually remind you?
-Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

How can i extend a wireless network with time capsule

How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

How can i extend an existing wifi verizon wireless network with time capsule?
It all depends on what you mean by "extend".
If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

I have 2 Adobe CC subscription plan under same adobe ID, but i only can manage to used on two computers. How can I activate another the second plan.

I have 2 Adobe CC subscription plan under same adobe ID, but i only can manage to used on two computers. How can I activate another the second plan.

Hi AndrewHISC
We would need to cancel one of the subscriptions and then you could sign up again using another ID.
Let me know if you wish to proceed with this.
Kind regards
Bev

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

I get a neighbor's wifi on my MacBook in my bedroom. How can I extend the range to the MacMini in my living room?

You can't. It's not your network.

How can I set up a second password on my teenager's iPhone

How can I set up a second password on my teenager's iPhone

What do you mean a second password? A second password where?
Cheers,
GB

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
Hacks are available to use the USB port on AppleTV1 to access more storage.
AppleTV2 does not have an internal drive.
Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

How can I extend the range of my chart?

I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
Thanks!

"I want to add some series that are missing from the chart. How do I do that?"
Here's a two step process to do that:
Select the chart to show the the data selection on the associated chart.
Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
Grab the control handle (small circle) at the bottom right corner of the selection, and drag right, as indicated by the blue arrow.
Result shown below.
Reassign colours and do other formatting as desired.
Regards,
Barry

HT1689 How can I extend the number of times my phone rings before going to answerphone

How can I extend the number of times my Iphone 4s rings before it goes to answerphone

Call you carrier and ask them how you can change this. The number of rings before voicemail kicks in is set by your carrier. Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

How can my iMac support 2560x1080 external monitor (LG 29EA93)

How can my iMac support 2560x1080 external monitor (LG 29EA93)?
Please, help on this issue?
iMac 2012 Late
NVIDIA GeForce GT 640M 512MB
OS X 10.8.5 (12F37)

Thanks for your prompt answer.
I still have problems and I don't know why.

How use my apple tv like second monitor

how use my apple tv like second monitor
some very help me

About AirPlay Mirroring in OS X Mountain Lion
tambien en Español

How can I extend to a second monitor

Similar Messages

Maybe you are looking for