How can I filter or block foreign language emails or email addresses

How can I filter or block foreign language emails or email addresses??
TIA
C

Most email clients have a provision to create a 'rule'. The rule examines the email as it is received. In generally you can search for specifically senders, recipients,subjects, or specific content words in the body. Based upon the findings of the rule, you can do something with the email (such as end it directly to the Trash).
For example if you know where all of valid you emails come from, you can create a rule that checks the from field for an acceptable sender and sends those email's that to the inbox, while sending all emails from other senders to the trash or spam folder
Keeping out foreign language emails is often difficult because because often it is difficult to come up with a rule that will catch them on the basis of language they are written in.
There are also commercial products that can scan incoming email and 'score' the email based upon content, and you decide at what 'score'  you want the mail sent straight to the trash or spam folder. Verizon's spam filter does this based upon Verizon's scoring system, and actually does catch a lot of spam. It also occaisonally catches things that are not spam however....
Hope that is helpful

Similar Messages

  • How can I change my auto-correction language from english to french?

    My system language is english, so all the default language is also in english
    but how can I change the auto-correction language from english to french and without changing the menu language?
    Message was edited by: Marixomia

    It's just, I want to change my spelling checker from english to french, that when I type some words in wrong order or miss some, I can know that.
    For now, when I type in french, almost every words are underlined by the red lines...

  • How can I remove the blocked contacts from skype h...

    Peace be upon you
    How can I remove the blocked contacts from skype home and all skype features?

    I found this solution and it worked.
    Paul B. Adams
    Re: safari 6.0 flash problem (blocked plug in) 
    Jul 26, 2012 7:39 AM (in response to defconnect5)
    I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
    However, I did see two versions of Flash:
    _Flash Player.plugin with old date
    Flash Player.plugin with todays date
    I deleted _Flash Player.plugin and this fixed the problem.

  • How can I filter a table from Data Control without enter query

    I have a table from a web service data control based on WSDL.
    I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
    For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
    How can I filter the table without enter query?
    Could anyone point me to a solution please.
    Thanks.
    jdev 11.1.5
    Edited by: 893364 on Oct 26, 2011 12:15 PM
    Edited by: 893364 on Oct 26, 2011 12:21 PM

    Hi,
    when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
    Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
    Frank

  • How can I interrupt the blocking call when call timeout?

    Hi,Guys
    I wrote an application server(daemon process) to talk with oracle server
    continuous which used oracle9 OCCI lib, each 5 min it executes the procedure
    on the DB server.
    Now I have come cross a problem:
    If the network is blocked, app server will blocked at occi call and would
    never pass, and no exception was catched :-(
    for e.g.
    1. Oracle server reboot without shutdown oracle process
    2. udp broadcast message storm blocked the connection between app server and
    oracle DB.
    I consider maybe it's because OCCI using the blocking mode of connection
    that caused this problem.
    How can I interrupt the blocking call when call timeout?

    Manage the timeout using a separate thread. When the timeout happens, issue a break on the OCCI connection. There is no direct way as of now. You need to do this to break a OCCI connection.
    retrieve the OCI handle from the OCCI handle (e.g. using Connection::getOCIServer or Connection::getOCIServiceContext methods) and issue a OCIBreak on it. Do not forget to allocate a error handle which should be passed to OCIBreak call.

  • Hello, I'm a french Photoshop CC user. My one is in english language, and I would like to work with french language. How can I do to have french language ?

    Hello, I'm a french Photoshop CC user. My one is in english language, and I would like to work with french language. How can I do to have french language ?

    In the CC Desktop app, click the gear > Preferences > App tab > choose Application Language, then install Photoshop CC
    Once the install finishes, Photoshop Preferences > Interface > UI Language, change to French, Restart Photoshop.

  • How can I allow or block the use of local storage by specific sites for all users in my domain.

    How can I allow or block the use of local storage by specific sites for all users in my domain.
    I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
    What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

    Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
    How would that possibly do what I asked?
    You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
    Feel better, real soon.

  • How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

  • How can I filter facebook widget feeds ?

    hello everybody
    I've started using social widget on my nokia C7, it's really nice. I want to set the widget to render updates from specific network / friend list  as I am a member in a lot of pages and have more than 400 friend. So whenever I connect to the internet I get flooded by a lot of unimportant updates and the important ones are lost in this crowd
    may someone tell me how can I filter updates ?
    Thanks

    Hi flegno,
    Depending on which version that Firefox is on, currently in the Simulator is looks like there is only a way to pin the apps that result in a searched category. Searching for people in contacts who have a particular app installed does not seem to be an option? However I cannot know for sure.
    Can you give another example on what you are looking for everything.me to do?

  • Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

    Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

    Edit  ---> referance ----->   general    ------> language

  • How can I filter alerts shown in the Server app?

    In the time I've been running OS X Mavericks Server, the only alert to come up in the Server app's Alerts pane is "Virus detected in inbound email". That's about as surprising as finding that water is wet, so I'd like not to see those alerts. I don't want to turn off the email filtering, I just want don't want to hear about this one kind of event.
    How can I filter the alerts in general or this one in particular?

    Hi ephraimephraim
    I dont know if you found a solutions, but I hit the same problem so here is what I worked out...
    Go to: Mac HD/Library/Server/Mail/Config/amavisd
    In there you will find a file called amavisd.conf
    Make a backup copy of this just incase! Now open the file using TextWrangler (its free from here http://www.barebones.com/products/textwrangler/download.html).
    Now scroll down to line 119 and it will look like this:
    #$virus_admin              = "[email protected]";  # notifications recip.
    #$spam_admin               = '[email protected]';
    #$spam_quarantine_to       = '[email protected]';
    #$banned_quarantine_to      = '[email protected]';
    #$virus_quarantine_to      = '[email protected]';
    What I waneted to do was stop the useless "Virus detected in inbound email" emails and just send a copy of the emails to one account that I could keep an eye on, so this is what I did.
    First deside on a alias to use, such as [email protected],
    Now you can insert that like this virus-admin\@$mydomain its relly is important to add the \@$mydomain this resolves up the top of the file so it should now look like this
    #$virus_admin              = "virus-admin\@$mydomain";  # notifications recip.
    #$spam_admin               = 'virus-admin\@$mydomain';
    #$spam_quarantine_to       = 'virus-admin\@$mydomain';
    #$banned_quarantine_to      = 'virus-admin\@$mydomain';
    #$virus_quarantine_to      = 'virus-admin\@$mydomain';
    now delete the # notifications recip. after the virus_admin to stop the Virus Notifications, then I deleted the # before the spam_quarantine_to, banned_quarantine_to, virus_quarantine_to  this "turns on" the line and then add # notifications recip. after them, so you should end up with
    #$virus_admin              = "virus-admin\@$mydomain";
    #$spam_admin               = "virus-admin\@$mydomain";
    $spam_quarantine_to       = "virus-admin\@$mydomain";  # notifications recip.
    $banned_quarantine_to      = "virus-admin\@$mydomain";  # notifications recip.
    $virus_quarantine_to      = "virus-admin\@$mydomain";  # notifications recip.
    Now just create a user on the server called virus-admin of add it as an alias using Workgroup Manger.
    Hope this helps

  • Hi. I just bought a macbook air and I use two languages every day.  How can I quickly move to another language while Im typing. Thanks

    Hi. I just bought a macbook air and I use two languages every day.  How can I quickly move to another language while Im typing. Thanks

    still doesnt work.. I already selected 2 languages.. but i can change it just with the mouse. There is no shortcut for macbook air. cmd space doesnt work.

  • How can I change the Apple Store language and keep the country of residence?

    How can I change the Apple Store language and keep the country of residence?

    Users do not have control over the language of the Mac App Store or iTunes stores for a particular country or region. It is what it is and can't be changed.

  • HT204380 How can I filter my 500+ email contacts to just those I can facetime chat with?

    How can I filter my 500+ email contacts to just those I can facetime chat with?

    You will need to remove it as your rescue email : log into your account via the 'manage your apple id' button on http://appleid.apple.com, select the 'Password And Security' section on your account's screen, and answer the two security questions that show - you should then be taken to another screen where you can change or remove your rescue email address.
    Then try logging out of your account and then log back in and see if you can then use it as your primary email address.

  • How can I filter thermocouple noise using a TC-2095 and SCXI-1102c?

    Hello all,
    I currently have four TC-2095s connected to SCXI-1102c cards inside a SCXI-1001 chassis. These thermocouples are floating and I have been getting a fair amount of noise (3-phase 400 Hz and even 60 Hz noise) when we power on some equipment such as blowers and fans. Using this current set up, how can I filter the noise? Or do would I need to set up a new hardware configuration (i.e. SCXI-1102 cards)?
    Solved!
    Go to Solution.

    Hi RALoo, 
    The 1102C has a lowpass filter with a cutoff at 10kHz, so you will not be able to filter in hardware with your current setup.  
    Your first option would be to use a software filter.  LabVIEW has several functions which accomplish this. More information on this can be found here: http://zone.ni.com/reference/en-XX/help/371361J-01/lvanls/filter_vis/
    The second option would be to change to SCXI 1102 cards as you suggested.  The lowpass filter of the 1102 has a selectable cutoff frequency at 2 Hz, which will stop the 400 and 60Hz noise from affecting your readings.
    Patrick W.
    Applications Engineer
    National Instruments

Maybe you are looking for

  • Reinstalling HP B210 Printer on Laptop OS: Windows 7 64 bits

    Hello, Pc:HP Pavilion DV7 Notebook PC Windows 7 Home premium 64 bits SP1 I also have problem with reinstalling my HP photosmart B210 (network)... I few days ago after update HP Support Assistant I lose the option of active my scan to PC. I uninstall

  • Gaps in interval data

    Hi Gurus, I am using oracle 11.2.0.1 Enterprise Edition. And I tried writing query different ways but unable to get going. Your help is greatly appreciated. The Query should give output as I explained below. This query is identify the gaps in interva

  • Why can't verizon tell us a simple date?

    I am getting extremely frustrated because Verizon says on the phones that the iPhone 6 plus is on back-order until 10/31 for the 128gb for Silver. I don't understand why they didn't have these on hand so people could get them. I would like it as soon

  • SQL Expression Validation

    I created a validation and choose 'SQL Expression' as the type. And i put the following in the Validation Expression 1: Select 1 from Employee where ID = :P20_ID what i want to do is to check if the employee id is existed or not. If yes, it will give

  • How to configure GB P60s in the SAP Portal?

    How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address se