How can I find my printer's ip connected (ethernet cable) to a time capsule which is in network extending mode ?

I got a network printer connected to a Time Capsule which extends my wireless home network. But I can't manage to find out it's IP address nor i manage to find it on the network ! Am I doing something wrong ? Is there a way to tell Time Capsule which is the IP of the network printer ?
Hope somebody can help me out !

Most printers can print their status page.. on the status page is the current IP. I personally don't buy network printers that don't have a small LCD with enough menu to set things like IP address. And reveal the current IP.
Is the printer set to dhcp? If so it will get an IP from the TC.
Apple removed useful aspects of the old v5 utility which would give you a listing off all IP addresses passed out by the TC or connected to it.
You can however do a netstat scan from your computer.
In finder type in network utility into the search (apple have hidden it in a stupidly obscure location)
In network utility run a netstat scan which should pick up the printer.
One aspect of this, is that if the printer is in a deep sleep, power saving mode.. you may not pick it up.. certainly you should make sure the printer is awake and ready to run.. even if you need to reboot it.
There will be a problem if the printer is manually set to the wrong IP range.. then it won't come up at all. To fix that you will need to actually read the printer manual.. and find out how to reset it to its defaults and start again.

Similar Messages

How can I backup an external hard drive connected to my mac with time capsule?

The hard drive on my IMac is 500GBytes. It is just about full. I have purchased an additional drive to attach to it permanently through the Firewire 800 interface. My plan is to move my photographs and iTunes to the attached drive. I currently use 2TB time capsule to backup my hard drive. Can I get time capsule to back up the external hard drive as well?
Thanks,
Herb

Can I get time capsule to back up the external hard drive as well?
I assume that you are asking about Time Machine backups to the Time Capsule here, correct?
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Here, you will see list of items that are excluded from backups. By default, the hard drive attached to your Mac will appear here.
Click on the name of the hard drive to highlight it
Click the - (minus) button to remove the drive from the list of items that are excluded from backups
Now, the drive will be backed up along with your Mac on the next pass that Time Machine makes, and any changes that you make to the hard drive will be backed up as well in the future.

How can I find a printer that is compatible with my ox 10.4.11 operating system

Helllo,
I have several questions but my most current one is how can I find a printer that is compatible with my current operating system?

Brother is good about supporting older Mac OS versions. We have their HL5250DN b/w laser that supports all the post-1997 Macs in the house, including a 1998 vintage Beige G3 minitower running OS 10.3.9. There is also a driver with OS9 support on the Brother web site.
The bigger problem, based on posts I see in these forums, is not a printer failing to support an older OS but one not supporting a new Mac OS. There are numerous posts after a big OS version change (like the intro of Lion) where people run out and buy whatever printer looks cute/sounds good without researching whether the device supports the new OS yet. Printer makers are often not good about having updated drivers developed by the time Apple rolls out a new OS.

I am a 66 year old novice. How can I find and print all the functions of the cmd key, please.

How can I find and print out all the functions of a command cmd key please?

You can also go to MAC HELP and enter 'Key Board Shortcuts' in the entry field.
Ciao.

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

How can I find exact username if I connected with sysdba privilege?

I granted sysdba privilge to a database user. I can connect that user as sysdba. From that users session, 'show user' command showing "SYS" and also username from v$session is also showing "SYS". How can I find actual username used for connecting the database as sysdba?
Steve Abraham

user10247588 wrote:
Thanks for the replay..
But my requirement is that in our production system auditors want to give separate username for each administrators (they are not recommending sys and system).
Normal dba privilege is not a problem. But for sysdba privilege every users are showing the user "SYS". How we can I identify which user is login to the database for a particular work if they connected as sysdba. How can I find which user did that (not just want the username "SYS", because all the administrators are identified by sys if they are connected as sysdba). If auditing is enabled how can I find the exact username. Because we are planning to give sysdba privilege to some of the administrators.
Also, is there any option to find the username, if one user is initiate shutdown of the database?First Please close the thread and keep questioning in only one thread.
then do not connect as sysdba

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can i send the music, photos and films from extern hdd to time capsule?

how can i send the music, photos and films from extern hdd to time capsule?

Hi Niel, i open Time Mchine, starts a new screen where i can see all Data (program etc.), my macbook and my extern hdd. there i have musik, films and picture...when i click them, where i have to set them?
Sorry, i got the last 20 years a pc, this is my first macbook pro and from today my first 2TB air port time cap.

My Mac can't find the server when I connect to cable internet.

My Mac can't find the server when I connect to cable internet. Ethernet is fine, the problem is that Safari doesn't open the login/password window. Can anybody help?

The system administrator of my network has had the following solution - to help open the window for the login/password I tick "web proxy" (and enter the information for web proxy server) in "network preferences - advanced - proxies", enter the login/password and then untick it to open webpages. A little complicated, but it works, and that's the only solution so far.

How can i find/ install printer driver hp laserjet 1010 for windows 7

Dear Sir/Madam
I have HP laserjet 1010 Perinter. my operating system is windows 7. my printer driver did't install. how can i find driver or software intall to my computer.
please give me some sjession. or download link
mr mintu
Cell. 8986272527
e-mail - [email protected]

The information available in the following weblink would help you to resolve the problem:
http://h30499.www3.hp.com/t5/Windows-7/hp-LaserJet-1010-driver-windows-7/td-p/1115411
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

How do I move my iTunes music library off my computer and onto Time Capsule, which I want to use as an external hard drive?

Does anyone know how I can move my very large iTunes music library folder off the computer and onto my fourth generation time capsule, which I'd like to use as an external hard drive?

This Apple support document may help.
Do you also plan to use the Time Capsule disk for Time Machine backups? If so, that approach has problems. For one, you don't be backing up your music library. For another, eventually Time Machine will consume all the space on that disk, which will cause problems for your music.

How can I transfer my music from an external hard drive to my Time Capsule and can I play it through apple TV?

All my music is currently stored on an external hard drive, but I would like to transfer everything onto my Time Capsule, so that everything is backed up, what is the best way to do this?
Is there a way I can then play all the content stored on the Time Capsule through apple tv without the need to clog up my macbook hard drive?

Did you import the music on the external hard drive into your iTunes library on your new PC or point iTunes at the location of your library stored on the external hard drive?
B-rock

Can I use back to my mac to access two daisy chained time capsules running on my network alone or do I also need a mac running on the same network?

I have a DSL modem router (HUWAI ECHO LIFE 520) with uPNP enabled. The first time capsule´s wan is connected to that router the second time capsules wan is connected to the first time capsules lAN. The router looks at the first time capsule as DMZ and passes traffic on the public IP through to it. There are airport expressses either end of the chain. The network works a charm. I would like to have both time capsules visible through Back to My Mac, which isn´t currently working. Back to My Mac is activated on all devices involved. What else to try?
Arved

Both TC should be in bridge mode. Is that what you have done? You cannot use the TC in router mode as it will cause double NAT problems.
Can you access one of the TC? Or do both fail to show up?

How can I find and print a bill from Apple site?

Hi
I need to get and print the invoice of my macbook purchase. It's a MacBook Pro I bought in 2008 and as It is an old purchase it makes it quite difficult to find the invoice.
Thank you for help.

If Apple doesn't keep invoices that old (and I wouldn't expect them to), and you didn't keep it either, there's probably no way to get it. What do you need from the invoice? Note that if you just need the serial number, and don't have the machine available, you can view that by logging in here:
https://supportprofile.apple.com
It's possible such an old machine might not be listed there, though.

How can I find the printed page number in an ibook app?

I want to go to printed page 129, I do not know what the corresponds to in my ibook.

There isn't any correspondence. I seem to recall that Amazon added that feature to the Kindle app but I haven't checked lately.

How can I find my printer's ip connected (ethernet cable) to a time capsule which is in network extending mode ?

Similar Messages

Maybe you are looking for